「Spring」を含む例文一覧(40241)

<前へ 1 2 .... 357 358 359 360 361 362 363 364 365 .... 804 805 次へ>
  • The compressed air to be supplied to the pressure chamber of the air spring 46 for closing the valve is switched to the compressed air in the high-pressure reservoir tank 80 so that the pressure in the pressure chamber of the air spring 46 for closing the valve is forcibly increased immediately before the valve element 21 is seated.
    閉弁用空気ばね46の圧力室内の圧力を弁体21の着座直前に強制的に上昇させるべく、閉弁用空気ばね46の圧力室に供給される圧縮空気を高圧リザーバタンク80内の圧縮空気に切り替える。 - 特許庁
  • As the overspeed braking assembly revolves at high speed, the brake rods expand at their upper ends, resisting against a spring force of the spring 83, and braking thin pieces 811 are pressed against the wall surface on the inside of a motor main body, thus braking is applied by friction and the brake disk is stopped.
    オーバスピードブレーキ組立体が速い速度で回転すると、ブレーキ棒はスプリング83のばね力に抗して上端が拡がり、ブレーキ薄片811、821がモータ本体10内の壁面に押し当たり、摩擦によりブレーキがかかり、ブレーキ盤が停止する。 - 特許庁
  • To provide a resin spring for a pump dispenser, wherein the discoloration of content is improved by forming a spring component used in a discharge mechanism part of the pump dispenser out of a specific polyacetal resin, with respect to the pump dispenser used for a lot of containers for shampoo, detergnet, cosmetic and the like.
    シャンプーや洗剤、化粧品などの容器に多く用いられているポンプディスペンサーにおいて、その排出機構部に使用するバネ部品を特定のポリアセタール樹脂で構成することで、内容物の変色が改善されるポンプディスペンサー用樹脂バネを提供する。 - 特許庁
  • Even if any one of spring constant selector valves of the left and right front wheels is temporarily in opening fixing abnormality and the spring constants become different at the left and right sides, difference of vehicle height caused by it can be reduced and it can be avoided that the vehicle is deflected.
    仮に、左右前輪のばね定数切換弁のいずれか一方が開固着異常であり、左右でばね定数が異なる大きさとなっても、それに起因する車高差を小さくすることができ、車両が偏向させられることを回避することができる。 - 特許庁
  • To provide a hot spring system with low cost, by which healthy effects of hot spring can be obtained every day from taking a bath at home, oversensitiveness to cold, skin deseases, or the like, can be improved in daily life according to kinds of ores.
    この温泉創作システム構造により健康によいとされてる温泉効果が自宅風呂でも日常得ることができ,なかに入れる鉱石の種類により冷え症,皮膚病など日常生活のなかで改善ができ,経済的にも安価な器具が提供できる。 - 特許庁
  • The shape memory alloy wire 2 is shrunk by the heat generation, and a braille pin 3 is moved to be pushed up against a force energized by a coil spring 4, since the force energized by the coil spring 4 is weaker than a shrinkage force of the shape memory alloy wire 2.
    この発熱により、形状記憶合金線2が縮み、コイルスプリング4によって付勢される力は形状記憶合金線2の短縮する力よりも弱いので、点字ピン3はコイルスプリング4によって付勢される力に抗して移動し押し上げられる。 - 特許庁
  • When the operation lever 46 is rotated in the direction for increasing the target value, first a torque by the first spring 47 is generated in the form of a drag, and then the second spring 48 acts between the lock pin 50 and the rotating shaft 45 to generate a torque in the form of a drag.
    操作レバー46を目標値増大方向に回動させると、まず第1ばね47によるトルクが抗力として発生し、続いて第2ばね48が係止ピン50と回動軸45との間で作用して抗力としてのトルクを発生する。 - 特許庁
  • A clamp mechanism 6 for fixing a work W on an index table 5 on a tilt table 4 supported via a tilt revolving mechanism is constituted of a disc spring type clamp mechanism having a clamper 6B energized normally in a clamp direction of the work W by a disc spring 6C.
    チルト旋回機構を介して支持されたチルトテーブル(4)上のインデックステーブル(5)上にワーク(W)を固定するクランプ機構(6)は、皿バネ(6C)によりワーク(W)のクランプ方向へ常時付勢されたクランパ(6B)を有する皿バネ式クランプ機構で構成する。 - 特許庁
  • When storing the unit 11, the roller 17 rolls on the wall surface of the leaf spring regulating guide 16 in the direction of length but a reaction force of the leaf spring 15 increases and thus decelerates the storing speed of the unit 11 until it reaches a storing position of the unit 11.
    ユニット11を収納するとき、ローラ17は、板ばね規制ガイド16の壁面をその長さ方向に転動していくが、ユニット11の収納位置に到達するまでの間、板ばね15の反力が増加してユニット11の収納速度を減速させる。 - 特許庁
  • The spring retainer has a plurality of spaced retainer bores corresponding to at least two of the spaced flange bores and at least one shaped spring portion that is adapted to contact the upper surface of the lateral attachment flange between the spaced flange bores.
    バネ保持具は、間隔の空いたフランジ穴の少なくとも2つと、間隔の空いたフランジ穴の間で横方向装着フランジの上面と接触するように適合させた少なくとも1つの成形バネ部とに対応する複数の間隔の空いた保持具穴を有する。 - 特許庁
  • Subsequently the optical scanning device 1 is constructed in such a way that inequality {(torsion spring constant K1 of mirror 13)/(moment I1 of inertia of mirror 13)|>|(torsion spring constant K3 of outer gimbal 11)/(moment I3 of inertia of outer gimbal 11)} holds for the purpose of enlarging an amplitude angle of the mirror 13.
    そして、ミラー13の振幅角を大きくするために、{(ミラー13のねじりバネ定数K1)/(ミラー13の慣性モーメントI1)}>{(外ジンバル11のねじりバネ定数K3)/(外ジンバル11の慣性モーメントI3)}となるように光走査装置1を構成する。 - 特許庁
  • To provide a push type key box which disables unlocking because a cushion spring is only bent even when a lock breaking action is taken, by two-pairing tumblers so as to increase setting patterns, and which can avoid an excessive load on an internal component by the cushion spring.
    タンブラーの2対化をすることにより設定パターンを大幅に増加させて、破錠行為を行ってもクッションスプリングが撓むだけで解錠することが出来ず、このクッションスプリングにより内部部品への過大荷重を回避出来るプッシュタイプキーボックスを提供すること。 - 特許庁
  • The plate spring members 20 are formed into comb tooth shapes having mounting parts 21 mounted on the chucks 10 and a plurality of spring pieces 22 which are independent with each other to be bent and deformed to sides by extending from the mounting parts 21 and being in contact with each workpiece 101.
    板ばね部材20は、チャック10に取付けられる取付け部21と、この取付け部21からそれぞれ延びて、ワーク101に接触することで互いに独立して側方へ撓み変形する複数のばね片22とを有する櫛歯状に形成されている。 - 特許庁
  • When a target height of the air spring is computed from a traveling speed of the vehicle at a curve entrance and a target inclined angle obtained using a curve data to control air supply and exhaust of the air spring, a traveling position of the vehicle is compared with vertical curve information.
    曲線入口での車両の走行速度、曲線データを用いて求めた目標傾斜角度から空気ばねの目標高さを演算して空気ばねへの給排気制御を行うに際し、車両の走行位置と縦曲線情報を比較する。 - 特許庁
  • To provide a method for selectively separating a methane gas from hot spring water to below 0.25 percent volume concentration with a change in chemical composition by oxidation, generation of a calcium scale by a reduction in hydrogen carbonate ions and a reduction in hot water temperature of hot spring prevented or suppressed, and an apparatus therefor.
    酸化による化学成分の変化、炭酸水素イオンの減少によるカルシウムスケールの発生、温泉の湯温の低下を防止又は抑制し、0.25パーセント体積濃度未満にまで、温泉水中から選択的にメタンガスを分離する方法及び装置の提供。 - 特許庁
  • To provide a spring recuperation retrieval system which makes a user answer a medical interview form regarding a health state, performing retrieval from a database(DB) according to the answer to diagnose the health state of the user, and selects the best spring recuperation facilities for the user.
    健康状態に関する問診票に利用者が回答し、その回答に基づいてデータベース(DB)を検索して利用者の健康状態を診断し、利用者に最適な温泉療養施設を選択することのできる温泉療養検索システムを提供する。 - 特許庁
  • The helical spring 18 increases the friction between the helical spring 18 and the sleeve 14, when the first element 2 is rotated to apply the brake to the rotation of the first element 2, and its diameter can be increased.
    前記つる巻きバネ(18)は、第1要素(2)が回動するときは、前記つる巻バネ(18)と前記スリーブ(14)の間の摩擦を増大させ、それによって第1要素(2)の回動に制動を掛けることができるように、その直径を増大させることが可能であるように構成されている。 - 特許庁
  • According to switching of an ultrasonic sensor 4 which detects whether a vehicle is located indoors or outdoors and cargo lever switches 34, 35, solenoid valves 2, 3, and negative pressure actuators 18, 19 are actuated selectively to set spring tension of a governor spring 13 to one of the three levels.
    車両が屋内にあるか屋外にあるかを検知する超音波センサ4と荷役レバースイッチ34,35の切り換えに応じて、ソレノイドバルブ2,3と負圧アクチュエータ18,19を選択的に作動させ、ガバナスプリング13のばね力を3段階に切り換える。 - 特許庁
  • A first magnetic member installed on the rod spring to cooperate with a second magnetic member installed on the frame is also provided to generate around the longitudinal axis a position-dependent torque constituted so as to compensate a torque applied to the segment by the rod spring.
    棒ばねによってセグメントに加えられるトルクを補償するように構成された位置依存性トルクを長手方向軸線の周囲で発生させるために、フレームに装着された第二磁性部材と協働する棒ばねに装着された第一磁性部材も含む。 - 特許庁
  • This clutch 20 comprises a pressure plate 50, the annular clutch spring 60 for energizing the pressure plate 50, a clutch inner having the boss 40E protruded axially from the pressure plate 50, and the clutch plate 70 for holding the clutch spring 60 between the pressure plate 50 and itself.
    クラッチ20は、プレッシャープレート50と、プレッシャープレート50を府勢する環状のクラッチスプリング60と、プレッシャープレート50から軸方向に突出するボス40Eを有するクラッチインナと、クラッチスプリング60をプレッシャープレート50との間に保持するクラッチプレート70とを備える。 - 特許庁
  • The server 10 is equipped with a retrieving means 11 which selects a coil spring out of coil springs having predetermined specifications by setting conditions and performing retrieval and a designing means 13 which designs a coil spring with new specifications by setting necessary conditions.
    サーバ10は、条件を設定して検索することにより予め定められた仕様のコイルばねの中よりコイルばねを選択する検索手段11と、必要条件を設定することにより新しい仕様のコイルばねを設計する設計手段13とを備えている。 - 特許庁
  • The interaction of the plate member 1 having a predetermined mass and a predetermined spring constant with the liquid filled damper 3 provided between the plate spring member 1 and the vibration member 5 effectively develops the damping effects of the liquid filled damper 3.
    所定の質量と所定のばね定数とを有する板ばね部材1と、板ばね部材1と振動部材5との間に設けられた液体封入ダンパ3との相互作用により、液体封入ダンパ3の減衰効果が効果的に発揮されるようにする。 - 特許庁
  • The control mechanism is equipped with a choke lever for rotating the choke valve in a close position, a throttle lever for rotating the throttle valve from an idle position to an open position against a deflecting force a throttle return spring, and a fast idle latch lever deflected by a fast idle return spring.
    該制御機構は、チョークバルブを閉位置に回転するためのチョークレバーと、該スロットルバルブをアイドル位置から開位置にスロットル戻しスプリングの偏倚力に抗して回転するためのスロットルレバーと、ファストアイドル戻しスプリングにより偏倚されるファストアイドルラッチレバーとを具備する。 - 特許庁
  • In the belt tension automatic adjustment device for an engine, a plurality of guide bars for guiding relative movement between a tension pulley support housing and spring case are arranged between the tension pulley support housing rotatably supporting the tension pulley and spring case in the automatic tensioner.
    エンジンのベルト張力自動調整装置において、オートテンショナーを、テンションプーリを回転自在に支持するテンションプーリ支持ハウジングとスプリングケースとの間に、テンションプーリ支持ハウジングとスプリングケースとの相対移動を案内する複数のガイドバーを介設したことを特徴とする。 - 特許庁
  • To provide a leaf spring in a refrigerating machine for quantifying the degree of the fatigue fracture of the leaf spring 12 of a stirling refrigerating machine 1 or the like, giving arbitrary durability, and ensuring the operation time of minimum 1,000 hours or at least 4,000 hours.
    スターリング冷凍機1などの板バネ12の疲労破損の程度を定量化し、任意の耐久性を付与可能で、最低1000時間ないしは4000時間以上の運転時間を保証することができる冷凍機における板バネを提供すること。 - 特許庁
  • When a pressure in an oil pressure chamber 53 formed between the brake piston 50 and the casing 31 is reduced below a predetermined pressure, the brake piston 50 is displaced to one side in the axial direction by virtue of spring force of the coiled wave spring 54, whereby brake force is exerted.
    ブレーキピストン50とケーシング31との間に形成される油圧室53の圧力が予め定める圧力よりも低下するとコイルドウェーブスプリング54のばね力によってブレーキピストン50が軸線方向一方側に変位してブレーキ力を作用させる。 - 特許庁
  • To provide a method for manufacturing a stainless steel spring which has the spring property by reinforcing a surface layer portion of austenitic stainless steel without depositing chromium compound, has excellent corrosion resistance, wear resistance and fatigue resistance, and has non-magnetic characteristic.
    オーステナイト系ステンレス鋼の表層部をクロム化合物を析出させることなく強化することにより、ばね性を付与し、優れた耐食性と耐摩耗性・耐疲労性を有し、しかも非磁性の特性をも兼ね備えたステンレス鋼ばねの製造方法を提供する。 - 特許庁
  • To provide a method and an apparatus for transporting hot spring water or geothermal water in a supersaturated state to calcium carbonate, in the multistage utilization of hot spring water or geothermal water, which do not cause trouble to the next others utilization equipment, and do not cause carbonate scale trouble.
    温泉水又は地熱水の多段的利用において、後の他者の利用設備に迷惑とならず、炭酸塩スケール障害を発生させずに、炭酸カルシウムに対して過飽和状態の温泉水又は地熱水を輸送する方法及び装置の提供。 - 特許庁
  • To provide a method and device for manufacturing a lithium secondary battery, which can smoothly conduct the assembly of batteries by reducing spring back of an electrode body; and to provide the lithium secondary battery capable of easily manufacturing by reduced spring back of the electrode body.
    電極体のスプリングバックを低減して電池の組立を支障なく行うことが可能なリチウム二次電池の製造方法および製造装置、ならびに電極体のスプリングバックが低減されて容易に作製することが可能なリチウム二次電池を提供すること。 - 特許庁
  • To prevent noise without making an S-shaped wire spring contact with pressure receiving levers, enable assembling of an active headrest, and avoid forward tilting of the headrest without oscillating the pressure receiving levers even when an occupant leans on the headrest and the S-shaped wire spring is bent.
    受圧レバーにS字ワイヤ・スプリングを接触させずに異音の発生を未然に回避できてアクティブ・ヘッドレストを組み付け可能にし、そして加えて、乗員がもたれてもそのS字ワイヤ・スプリングが撓んでもその受圧レバーを揺動させずにヘッドレストの前傾を未然に回避する。 - 特許庁
  • The nozzle holding body 122 holds the adsorption nozzle 124 in a state preventing coming off by mounting a plate spring 178 on the adsorption nozzle 124 for having an engaging face 188 of the plate spring 178 engaged elastically with an inclination 156 of the nozzle holding body 122.
    吸着ノズル124に板ばね178を取り付け、板ばね178の係合面188がノズル保持体122の傾斜面156に弾性的に係合することにより、ノズル保持体122が吸着ノズル124を離脱を防止した状態で保持する。 - 特許庁
  • A slide door 6 is magnetically attracted and supported by a magnet 15 on an upper end position so that a spring to support the slide door 6 on an upper end position can be suspensed with and door 6 is prevented from moving heavily up and down because of a rub between the slide door 6 and the spring.
    マグネット15の磁力でスライドドア6を上昇端位置に吸着保持することで、スライドドア6を上昇端端に保持するためのバネを省略し、スライドドア6とバネの間に生じる摩擦でドア6の上下動が重くなるのを防止する。 - 特許庁
  • In the austenitic stainless steel foil for a spring as a stainless steel strip for a spring of JIS Z 4313 SUS301-CSP, the mean crest spacing Sm of a cross-sectional curve in the surface is ≥40 μm, and the amount of martensite is 15 to 50% by volume ratio.
    JIS Z 4313 SUS301−CSPのばね用ステンレス鋼帯であるばね用オーステナイト系ステンレス鋼箔において、表面の断面曲線の平均山間隔Smが40μm以上、マルテンサイト量が体積率で15%以上、50%以下とする。 - 特許庁
  • In the ionizing wire automatic cleaning device, the cleaning member 67 is put to a base frame 47 and rotated while resisting against a coil spring and separated from the ionizing wire 48 after driving and also the separated state is kept by pushing the coil spring and the cleaning member 67 is returned to a home position.
    このイオン化線自動清掃装置は、駆動後に、清掃部材67をベース枠47に当ててコイルスプリングに抗して回動し、イオン化線48から離すとともに、コイルスプリングで押さえてその離した状態を保持して清掃部材67をホームポジションに戻す。 - 特許庁
  • As the load increased part 8 used is a wire material 6a forming the garter spring 6 with a wire diameter d_2 larger than the other portions of the load increased part 8 or wire materials 6a and 6b forming the garter spring 6 double-wound at the load increased part 8.
    荷重増大部8としては、ガータースプリング6を形成する線材6aの線径d_2がこの荷重増大部8にて他の部位よりも太いもの、あるいはガータースプリング6を形成する線材6a,6bがこの荷重増大部8にて二重巻きのものを使用する。 - 特許庁
  • In the micro-switching element including an elastically operating spring, a membrane formed and held on one end part of the spring, and a lower electrode formed below the membrane and generating electrostatic force by application of a voltage, the membrane is a non-planar type.
    弾性的に動作するスプリングと、スプリングの一端部に保持されて形成されたメンブレンと、メンブレンの下方に形成され、電圧の印加により静電気力を生じる下部電極とを含むマイクロスイッチング素子において、メンブレンは、非平面型であることとする。 - 特許庁
  • An outer peripheral surface 44 of a friction spring 40 mounted on the return spring 30 in series, is frictionally bonded to an inner peripheral surface 52 of the piston 50, and slides with respect to the piston 50 in the excess stroke of the piston 50 for automatically adjusting a clearance at non-braking.
    リターンスプリング30に直列に設けられるフリクションスプリング40は、その外周面44がピストン50の内周面52に摩擦接合し、ピストン50のストロークが過大となったときには、ピストン50との間で摺動し、非ブレーキ時の間隙を自動調整する。 - 特許庁
  • In this switch sheet using the dome-like metal spring having the resin sheet adhered to the outer surface thereof, the resin sheet and the adhesive in the dome-like metal spring are eliminated to provide the switch sheet formed with a hole part.
    外表面に樹脂シートを接着剤で接着したドーム状金属バネを用いたスイッチシートであって、前記ドーム状金属バネ頭頂部の前記樹脂シート並びに接着剤を除去した、穴部が形成されているスイッチシートとすることによって、解決される。 - 特許庁
  • In such a spring manufacturing equipment to carry out the method, a means for carrying out the angle control of the winding nose for winding the spring wir 3 such as a cam controlled lever, a pneumatically or hydraulically controlled lever and electric motor, is equipped.
    このような方法を実行するバネの製造装置には、例えばカムにより制御されるレバーや空気圧式または油圧式に制御されるレバーや電気モータのような、バネのワイヤ3を巻き込むために巻込みノーズの角度調整を行う手段が設けられる。 - 特許庁
  • To provide an electrolytic sterilizer in a circulator of pool water, hot spring water, or bath water which can effectively sterilize and purify circulating water of pool water, hot spring water, or bath water during its circulation with a simple structure.
    簡単は構造によりプール水、温泉水、または風呂水の循環水をその循環中において効果的に殺菌浄化を良好に行うことができるプール水、温泉水、または風呂水の循環装置における電解殺菌装置を提供することを課題とする。 - 特許庁
  • A rear face side of the contact piece 55 of the negative terminal 50 is equipped with an auxiliary spring part 56, and because the bent and deformed auxiliary spring part 56 regulates the move of the contact piece 55 to the rear face side pressed by a base 22, that the contact piece 55 will be crushed is prevented.
    負端子50の接触片55の背面側には補助ばね部56が備えられており、口金22に押圧された接触片55が背面側へ移動するのを撓み変形した補助ばね部56が規制するので、接触片55が潰れてしまうことを防ぐ。 - 特許庁
  • That is, the winding pitches P2 of the coil spring 60 on the 120-mm portions of the fixing roller pipe 52 from both its longitudinal ends are longer than the winding pitch P1 of the coil spring 60 on the 120-mm portion of the fixing roller pipe 52 that is the longitudinal middle portion of the roller pipe 52.
    即ち、定着ローラ管52のうち長手方向両端から120mmの部分におけるコイルばね60の巻きピッチP2は、定着ローラ管52のうち長手方向中央部120mmの部分におけるコイルばね60の巻きピッチP1よりも長い。 - 特許庁
  • A coil spring 36 (38) is mounted between the tip of the tooth 31A (31B) and the lower side of the stator coil 30A (30B), and a coil spring 37 (38) is mounted between a base of the tooth 31A (31B) and the upper side of the stator coil 30A(30B).
    ティース31A(31B)の先端部とステータコイル30A(30B)の下面との間にはコイルスプリング36(38)が取り付けられ、ティース31A(31B)の根本部とステータコイル30A(30B)の上面との間にはコイルスプリング37(38)が取り付けられている。 - 特許庁
  • The opening/closing material 4 opens the drainage hole 3 against the energizing force of the spring 5 with the centrifugal force of the residing water in association with the rotation of a windmill and it is released from the centrifugal force of the water after drained to close the drainage hole 3 with the energizing force of the spring 5.
    そして、開閉材4が、風車の回転による溜まった水の遠心力でバネ5の付勢力に抗して排水孔3を開き、排水後水の遠心力から開放されてバネ5の付勢力で排水孔3を閉じるようになされている。 - 特許庁
  • A pin 16 is provided to each weight with a deviation to each cutter shaft and each spring is a blade spring 21 which is bent with its root fixed to the rotating member to come into contact with the pin at the tip thereof so that the weight is biased to a direction opposite to the direction of rotation by the centrifugal force.
    錘にカッタシャフトと偏倚してピン16が設けられ、バネは、回転部材に基端が取付けられ湾曲して先端がピンに当接し弾性力により錘を遠心作用で回動する方向とは反対の方向に付勢する板バネ21である。 - 特許庁
  • The first rubber elastic body 10 is formed into a cylinder for mainly absorbing the axially right-angled vibration with a hard spring characteristic, and the second rubber elastic body 20 arranged on both ends of the elastic body 10 is formed into a cylinder for mainly absorbing the torsional directional vibration with a soft spring characteristic.
    各アームアイに挿着された第1,第2ゴム弾性体は車体側に固定された各一対の取付板41,43に挟まれ、その中心孔11,23及び取付板の取付孔に金属ピン50を挿通させナット53で締め付けることにより固定される。 - 特許庁
  • This pendant device is equipped with a lock mechanism 4 that pinches a drawing out part 9b of a constant force spring 1 and fixes the constant force spring 1 in a releasable state under the lower position of the device A, so that operation of the lock mechanism 4 can be done easily even if in the state of installation.
    懸架装置Aの下部位置に、定荷重バネ1の引出し部9bを挟んで定荷重バネ1の復元を解除可能に固定するロック機構4を備えるので、設置状態においてもロック機構4の操作を容易に行うことができる。 - 特許庁
  • When a force matching a pressure P in the cylinder oil chamber 4b at the bottom dead center is smaller than the spring force of the spring 21, the spool 20 is moved from the drive pressure port 11 side toward the intermediate port 18 side, and the communication passages 14a, 14b are allowed to communicate with each other in this order.
    また、下死点におけるシリンダ油室4b内の圧力Pに応じた力がばね21のばね力よりも小さくなると、スプール20が駆動圧ポート11側から中間ポート18側に向かって移動し、連通路14a、14bが順次連通される。 - 特許庁
  • A thread tension bracket and a thread tension spring are attached along the internal circumference of the inner rotary hook 20 with their superposed with each other and functioned as a tension generation part 22 for applying a resistance to a pull-out of the bobbin thread led out through a space between the thread tension bracket and the thread tension spring.
    糸調子板と糸調子ばねとが、内釜20の内周に沿って重ね合わせた状態で取付けられ、糸調子板と糸調子ばねとの間を通過して導出される下糸の引出しに抵抗を与える張力発生部22として機能する。 - 特許庁
  • To provide a coiling machine which can perform bending work of end parts of a coil spring at the same time and which can easily form the coil spring which does not damage the contact face of a filter with a flow-in coupling.
    本発明は、コイリングマシンにおいて、端部の曲げ加工も同時に行えることに着目して為されたものであり、簡単に形成可能で、且つフィルタおよび流入継手の接触面を損傷することのないコイルばねを提供することを課題としている。 - 特許庁
<前へ 1 2 .... 357 358 359 360 361 362 363 364 365 .... 804 805 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.