「decrease by」を含む例文一覧(5433)

<前へ 1 2 .... 28 29 30 31 32 33 34 35 36 .... 108 109 次へ>
  • The foamed sheet specified by the above conditions is a heat-resistant foamed sheet showing excellent heat resistance and dimensional stability achieved by introduction of a heat resistant crystalline domain and a decrease in shrinkage force due to a residual stress controlled by the crosslinkage degree.
    上記条件に規定される発泡シートは、耐熱性を有する結晶ドメインの導入と架橋度に支配される残留応力による収縮力の低減により、耐熱寸法安定性に優れる耐熱発泡シートとなる。 - 特許庁
  • By suppressing the potential variation of the sensor element leaked by light irradiation, bias voltage variation by increase or decrease of the leakage current of itself can be suppressed, and leakage current of excellent response characteristics to illuminance can be generated.
    光照射によりリークするセンサー素子の電位の変化を抑制することにより、みずからのリーク電流増減によるバイアス電圧変化を抑制し、照度に対する応答特性の優れたリーク電流を生成することが可能となる。 - 特許庁
  • When the clearance Δh is decreased by the increase of load, the decrease is detected by a displacement gauge 9, voltage corresponding to the displacement amount is applied to the piezoelectric element 3, the piezoelectric element 3 is contracted by Δh, and the fluid resistance is reduced.
    負荷の増大により隙間Δhが減少すると、それを変位計9が検知し、その変位量に対応した電圧が圧電素子3にかかり、Δh相当分だけ圧電素子3は収縮し、流体抵抗を減少させる。 - 特許庁
  • To decrease the number of parts and achieve downsizing in a power unit for a hybrid vehicle whose driving wheels are rotatingly driven by both of the driving force generated by an engine, and the driving force generated by an electric motor.
    エンジンが発揮する駆動力ならびに電動モータが発揮する駆動力のいずれによっても駆動輪を回転駆動し得るようにしたハイブリッド車両用パワーユニットにおいて、部品点数の低減および小型化を可能とする。 - 特許庁
  • To continue stable operation for a long period of time by preventing an increase of the difference pressure of fluid passage and decrease of flux by contamination on the film surfaces of a membrane separating means with a cleaning fluid cleaning equipment for cleaning the cleaning fluid by the membrane separating means.
    洗浄液を膜分離手段で浄化する洗浄液浄化装置において、膜分離手段の膜面の汚染による通液差圧の上昇及びフラックスの低下を防止して、長期に亘り安定な運転を継続する。 - 特許庁
  • “Supply-side shock” in the past and the price surges and continued high price levels of crude oil caused by price formation through the market. The two oil shocks in the past were “supply-side shocks” caused by a temporary decrease in crude oil production which was accompanied by surges in prices (Figure 1.3.1).
    過去の「供給側のショック」と市場を通じた価格形成による原油価格上昇・高止まり過去の二度の石油ショックは、原油生産が一時的に減少し価格が上昇した「供給側のショック」であった。 - 経済産業省
  • To provide a motor using a permanent magnet which improves generated thrust by raising a magnetic saturation limit and by preventing a decrease in magnetic flux, further reduces the generation of heat by suppressing the greneration of an eddy current in a magnetic pole.
    磁気飽和限界を高くすることや、磁束の減少を防ぐことで発生推力を向上させ、さらに磁極での渦電流の発生を抑えることで発熱を低減した永久磁石を利用したモータを提供する。 - 特許庁
  • To decrease variation of stopping position caused by variation of a clearance in the axial direction generated by the difference of inertia force of a mold platen by the difference in speed setting.
    速度設定の違いによる型盤の慣性力の差により発生する軸方向の隙間のばらつきに起因する停止位置のばらつき低減することができる電動射出成形機の型開装置及び型開方法を提供する。 - 特許庁
  • Further, by setting an increase/decrease amount β of the idling up speed when the second electric load is actuated (no switching operation) to a value within a range which is hardly noticed by the user, even when the electric load is actuated under a condition unintended by the user, an uncomfortable feeling by the user is prevented.
    また、第2電気負荷(スイッチ操作無)が作動したときのアイドルアップ回転数の増減量βを、ユーザが気づきにくい範囲内の値に設定することで、ユーザが意図しない状況で電気負荷が作動しても、ユーザが違和感を感じないようにする。 - 特許庁
  • To manufacture a lens mold with which a diffraction structure for aberration correction can be formed on the light converging surface side of an optical lens and further an optical element mold for an optical aberration correcting element etc., without decrease in diffraction efficiency nor a decrease in product value by using an electron beam drawing device.
    回折効率の低下や製品価値の低下を招かずに、光レンズの集光面側に収差補正用回折構造を形成することが可能なレンズ成形型、更には光学収差補正素子等の光学素子成形型を、電子ビーム描画装置による描画を用いて作製すること。 - 特許庁
  • An increase/decrease alteration specifying means 27 specifies increase, decrease or non-alteration of a pointer value of a channel specified by the channel alteration specifying means 26 for the justification means 25 sequentially according to a specified pattern.
    また、増減変更指定手段27は、ジャスティフィケーション手段26に対してチャネル変更指定手段26によって指定されたチャネルについてのポインタ値の増加、減少または無変更の指定を行なうとともに、その増減の指定を所定パターンにしたがって順次変更する。 - 特許庁
  • A current command value calculation part 61 calculates a γ-axis current increase/decrease value in each calculation period on the basis of a torque deviation Δτ between target steering torque τ* and actually steering torque τ, and calculates a γ-axis current command value Iγ* by integrating the γ-axis current increase/decrease value.
    電流指令値演算部61は、演算周期毎に、目標操舵トルクτ*と実際の操舵トルクτとの間のトルク偏差Δτに基づいてγ軸電流増減値を演算し、当該γ軸電流増減値を積算することによりγ軸電流指令値Iγ*を演算する。 - 特許庁
  • In the adapter with the back pressure adjusting apparatus, the cross-section orthogonal to the axial direction of the valve rod of the needle valve of the back pressure adjusting apparatus, is made to be an ellipse, to smooth the flow in the adapter, to decrease the retention resin of the melted resin and to decrease the deteriorated resin caused by it.
    背圧調整装置付きアダプタにおいて、背圧調整装置のニードルバルブの弁棒の軸方向と直角の断面を楕円形にすることにより、アダプタ内の流動をスムーズにして、溶解樹脂の滞留樹脂を減らし、それに起因する劣化樹脂を軽減する。 - 特許庁
  • To provide a fuel cell, an electrode-electrolyte membrane assembly, their manufacturing methods, and a transcription sheet to be used for them wherein waste of a catalyst layer can be reduced by preventing decrease of utilization rate of active components of the catalyst layer according to decrease of gas concentration.
    ガス濃度の低下に応じて触媒層の活性成分の利用率を低下させるのを防止して触媒層の無駄を少なくすることができる燃料電池、電極−電解質膜接合体、それらの製造方法及びそれらに用いられる転写シートを提供することにある。 - 特許庁
  • Meanwhile, by measuring a present cell voltage and present cell currents at an inlet and an outlet sides, the present correlation is obtained from a present cell voltage increase-decrease transition state and a present current increase-decrease transition state to diagnose power generation failure.
    その一方、現状のセル電圧とガス入口・出口側のそれぞれの現状のセル電流とを測定することで、現状のセル電圧増減推移状況とセル電流増減推移状況とから現状の相関関係を取得し、この相関関係から発電不良を診断する。 - 特許庁
  • If no frame error is caused, an update amount dEid (downward update amount) to decrease a reference value is decided in response to a magnitude of a reference Eb/I0 value (Ei) to decrease the reference Eb/I0 value by the update amount dEid so as to clear an error occurrence flag (steps S13 to S15).
    フレームエラーが発生していない場合には基準値を下げる更新量dEid(下方更新量)を基準Eb/I0値(Ei)の大きさに応じて決定し、基準Eb/I0値を更新量dEidだけ下げ、エラー発生フラグをオフとする(ステップS13〜S15)。 - 特許庁
  • To provide a packaging bag which exhibits a little decrease in barrier properties even after a laminated film is embossed in the packaging bag composed of the laminated film containing an inorganic substance deposited layer, and has no decrease in quality retention while a reinforcing effect of a shape stability by embossing is held.
    無機物蒸着層を含む積層フィルムで構成される包装袋において積層フィルムにエンボスを行ってもバリア性の低下が少なく、エンボスによる形状安定性の強化効果を保持しながら品質保持性の低下しない包装袋を提供すること。 - 特許庁
  • A circuit 6 for detecting "sudden decrease of voltage to ground in the electroconductive unit 1 of an electric fence" by impressing low direct voltage to the electroconductive unit 1 of the electric fence in a waiting state and a circuit 7 for holding a memory for a fixed period of time when the sudden decrease of the voltage to ground is detected are equipped.
    待機中は電気柵の導電部1に直流低電圧を印加して「電気柵の導電部1の対地電圧が急に下がったこと」を検出する回路6と、対地電圧の急減が検出されたらそれを一定時間記憶保持する回路7を設ける。 - 特許庁
  • To provide a plane optical waveguide type laser device that has a small decrease in output light power and small deterioration in beam quality due to an increase or decrease in excitation light power, by reducing unevenness of temperature distribution of a core layer of a plane type optical waveguide and suppressing produced thermal lens effect.
    平面型光導波路のコア層における温度分布の不均一性を軽減し、発生する熱レンズ効果を抑制することで、励起光パワーの増減に伴う、出力光パワーの低下およびビーム品質の劣化の少ない平面光導波路型レーザ装置を得る。 - 特許庁
  • When a voltage value decrease detection means 11f detects a decrease in the terminal voltage of the battery B during charging of the battery B, the control means 11b transmits notification information giving a notification of charge failure in the battery B to the information management device 20 by using the wireless communication means 16.
    電圧値低下検出手段11fはバッテリーBの充電中にバッテリーBの端子電圧の低下を検出すると、制御手段11bはバッテリーBの充電異常を通知する通知情報を無線通信手段16によって情報管理装置20に送信させる。 - 特許庁
  • The persistent tooth anticipation system allows anticipation of such an easy-to-understand item as number of persistent teeth by outputting the decrease curve or decrease straight line of the total effective root surface area, and the number can be used as material for long- term tooth protection, treatment and instructions.
    本残存歯予測システムは総有効歯根表面積の減少曲線や減少直線を出力することによって、残存歯数という理解し易いものを予測することができ、長期的な歯の予防、治療及び指導を行うための資料として用いることができる。 - 特許庁
  • To provide the inspection equipment and the inspection method of a shadow mask which make generating of dent by an air-gun or handling decrease, and make adhered foreign substance remarkably decrease, in the inspection process of the shadow mask for SST systems with a metal thin board of the comparatively thin thickness.
    金属薄板の厚みが比較的に薄いSST方式用のシャドウマスクの検査工程においてエアーガンや取り扱いによるペコの発生を減少させ、また、付着した異物を著しく減少させるシャドウマスクの検査装置及び検査方法を提供すること。 - 特許庁
  • To provide a method and an apparatus for manufacturing a sleeve printing plate which can largely decrease burden and stress loaded on a worker by remarkably decrease complicated and troublesome manual works, and can mount a flexographic printing plate on a sleeve for printing in a short time and easily without requiring a skillful ability.
    煩雑で面倒な手作業を大幅に減らして作業者にかかる負荷やストレスを大きく低減させ、熟練技能を要さずとも、短時間で容易に印刷用スリーブにフレキソ印刷版の貼り込みを可能とするスリーブ印刷版の製造方法と製造装置を提供する。 - 特許庁
  • To provide a manufacturing process of a letterpress for printing which can print a highly minute pattern capable of preventing the decrease of a dimensional accuracy and the decrease of the pattern accuracy and the reproducibility of fine lines when the high accuracy pattern printing is conducted by a letterpress printing process, and to provide a minutely printed manufacturing article.
    凸版印刷法により高精細なパターンの印刷を行う際、樹脂を基板としているため寸法精度の低下、細線のパターン精度と再現性の低下を防ぐことができる高精細パターンが可能な印刷用凸版の製造方法及び精密印刷製造物を提供する。 - 特許庁
  • To provide a paper sheet handling device with excellent operability and reliability capable of effectively utilizing the whole storage part by appropriately selecting the storage place of each kind of paper sheet, flexibly coping with the increase/decrease of the kinds of paper sheets and the increase/decrease of the number of paper sheets to be handled among the kinds.
    紙葉の種類の増減や種類間の処理枚数の増減にも柔軟に対応して、各種類の紙葉の収容先を適切に選択可能とすることにより、収容部全体を有効に活用可能な、運用性および信頼性に優れた紙葉処理装置を提供する。 - 特許庁
  • With regard to personnel costs for public servants, the budget will accurately reflect a decrease in salaries through salary reviews, a net decrease in staffing, and others at both national and local level. As a result, personnel costs for national public servants will be reduced by 19.0 billion yen from the previous year’s initial budget to 5,106.5 billion yen.
    公務員の人件費は、国・地方を通じて、給与改定による給与の減額や定員純減等を的確に予算に反映することとしており、国家公務員の人件費は、前年度当初予算と比べ百九十億円の減少となる五兆千六百五億円となっております。 - 財務省
  • To decrease the moisture absorption and the thermal dimensional change of a nonwoven fabric for electric insulation containing a wholly aromatic polyester fiber, improve the moisture resistance and heat resistance and decrease the thermal expansion coefficient in thickness direction of an insulation layer produced by applying a thermosetting resin to the nonwoven fabric for electric insulation.
    全芳香族ポリエステル繊維を含む電気絶縁用不織布の吸湿性を小さく、且つ熱による寸法変化量を低減し、この電気絶縁用不織布に熱硬化性樹脂を保持させた絶縁層の耐湿性と耐熱性の向上と、厚さ方向の熱膨張率を小さくする。 - 特許庁
  • To decrease reading errors of a signal or tracking errors and to decrease structural troubles of a drive by having no eccentricity of centroid in a state in which two sheets of substrates are stuck, even when two sheets of substrates to be stuck have deviation of centroid and having an optical information medium with dynamic balance at rotation.
    貼り合わせる2枚の基板に重心のずれがある場合でも、2枚の基板を貼り合わせた状態で重心の偏心がなく、回転時の動的釣合がとれた光情報媒体を得て、信号の読み取りエラーやトラッキングエラーを低減し、またドライブの機構的なトラブルを低減する。 - 特許庁
  • To provide a method for fabricating a flash memory device, to decrease a cell size by forming a control gate within a minimum line width permitted in the fabrication process of a semiconductor memory device, and to efficiently obtain the operation characteristics of the device even in case of the decrease of the cell size.
    半導体メモリ素子の製造工程で許容される最小の線幅の内側の領域にコントロールゲートを形成して、セルサイズを縮小することが可能であると共に、セルサイズの縮小時にも素子の動作特性が効率的に確保されるようにしたフラッシュメモリ素子の製造方法の提供。 - 特許庁
  • It is possible thereby to reuse it by condensing and recovering the mist containing the sterilization liquid to decrease an amount of use of the sterilization liquid itself in a sterilization chamber 21 and also to decrease an amount of use of the chemical agent for exhaust gas treatment in a deodorizing apparatus 28.
    これにより、殺菌液を含むミストを凝縮して回収することで、再利用も可能となり、殺菌室21での殺菌液自体の使用量を減少するとともに、脱臭装置28での排気処理のための薬剤の使用量も減少するようにしている。 - 特許庁
  • This money processor is provided with the cassettes each equipped with a storage medium communicating holding data on money by radio and further provided with a communication means obtaining increase/ decrease data regarding an increase or decrease in the amount of money held in the cassette from the storage medium by radio, so that counting management by the cassettes can efficiently be performed.
    この発明は、貨幣の保有データを無線で通信する記憶媒体を備えたカセットを設け、前記カセットに保有されている貨幣保有量の増減変化に関する増減変化データを前記記憶媒体から無線により通信して取得する通信手段を設けることにより、カセット単位での計数管理が能率よくできる貨幣処理装置であることを特徴とする。 - 特許庁
  • To provide an axle load increase/decrease device of a delivery vehicle capable of imparting appropriate traction to a rear axle side by appropriately increasing an axle load of the rear axle of an empty vehicle.
    空車時におけるリヤアクスルの軸重を適宜に増加させて該リヤアクスル側に適切なトラクションを与え得る運搬車両の軸重増減装置を提供する。 - 特許庁
  • To provide a coated protective pipe made of a fiber-reinforced plastic for a hardware installed outside in which wind cutting sound and decrease in durability resulted from vibration caused by whirlspool are suppressed.
    風切り音ならびに渦による振動に起因する耐久性低下を抑制した屋外設置機材用繊維強化プラスチック製被覆保護管を提供する。 - 特許庁
  • To shorten the whole dimension in axial direction and to increase or decrease shift stages by a change of some elements in a transmission provided with two counter shafts.
    カウンタ軸が2本備えられた変速機において、全体の軸方向寸法の短縮を図ると共に、一部の要素の変更で変速段の増減を可能とする。 - 特許庁
  • Moreover, the trend in the increase and decrease of the deviation from the voltage in the node 12 or the node voltage reference is indicated by changing the diameter of the upper side 14 and the lower side of the column 13.
    また、ノード12における電圧またはノード電圧基準値との偏差の増減傾向を、円柱体13の上面14と下面の直径を変えることで表示する。 - 特許庁
  • To provide a magnetooptical spatial light modulator, which can decrease a driving voltage and prevents a read/write error while maintaining the required light modulation quantity by improving the voltage-driving characteristics.
    電圧駆動特性を向上させることで、必要な光変調量を保ちながら、駆動電圧を低減でき、読み取り・書き込みエラーが生じないようにする。 - 特許庁
  • To provide an image reader by which the number of setting times of image read conditions on a same film image is reduced so as to decrease its image read processing time.
    同一のフィルム画像に対する画像読取条件の設定回数を減らし、画像読取処理時間を短縮することができる画像読取装置を提供する。 - 特許庁
  • To solve the problem that the ability of a server is limited by the ability to fetch data from a storage during the distribution of streaming to clients, resulting in decrease in data transfer rate and increase in processing time.
    ストリーミングをクライアントに配信する際にストレージからデータを取り出す能力によってサーバ能力が制限され、データ転送速度が低下し、処理時間が増加する。 - 特許庁
  • To decrease the number of masks of a 3D laminate memory device, in which the required number of masks increases because a separate mask is used for each connection level, by devising the pattern.
    3D積層メモリ装置は、各接続レベル毎に別個のマスクが使用されるので必要なマスク数は多くなるが、パターンを工夫して必要マスク数を減らす。 - 特許庁
  • Thus, a user recognizes a life expectancy of the washing and drying machine 10 or the function parts by the decrease in function of the function parts before they abruptly become unusable.
    そのため、洗濯乾燥機10や機能部の寿命は、突発的な使用不能状態になる前に、機能部の機能の低下によって使用者に認識される。 - 特許庁
  • When the rotational speed exceeds the pulse point of 267, the control section performs control so as to increase the rotational speed by an amount equivalent to the decrease from the present rotational speed up to the pulse point of 534 (S28).
    そして、267パルスの地点を超えると、534パルスの地点まで、現在の回転速度に対して減速した分だけ加速するよう制御する(S28)。 - 特許庁
  • To record characters and images of a high quality by preventing a density decrease even at high-density parts and restricting bleeding of outlines even in recording of an interlace system.
    高濃度部においても濃度を低下させることなく、また、インターレース方式の記録においても、輪郭の滲みを抑え、高品質の文字および画像の記録を行う。 - 特許庁
  • The upper beam 3 and the lower beam 4 are rigidly connected to a CFT column 1 by welding, the highly efficient CFT column 1 is combined with the two-stage beam 2 to decrease the deformation in the case of an earthquake.
    上梁3と下梁4は、CFT柱1に溶接で剛接合し、高性能のCFT柱1と二段梁2の組合せで地震時の変形を低減する。 - 特許庁
  • To provide an inkjet head which prevents a characteristic decrease of a piezoelectric element caused by moisture and secures a good ejection performance also for an ejection performance of ink.
    湿気に起因する圧電体素子の特性低下が防止され、しかもインクの吐出性についても良好な吐出性が確保された、インクジェットヘッドを提供する。 - 特許庁
  • To provide generator-motor equipment for a vehicle which copes with various kinds of requests by one electric rotating machine for a vehicle, while restraining efficiency decrease, and is superior in efficiency.
    効率低下を抑止しつつ1台の車両用回転電機で多様な要求に対応し、かつ、効率に優れた車両用発電電動機装置を提供すること。 - 特許庁
  • Thereby, decrease in the display performance caused by a push-down phenomenon occurring when a scanning signal (Yj) falls, that is, when a single horizontal scanning period is terminated.
    これにより、走査信号(Yj)が立ち下がる際、即ち一水平走査期間を終了する際に生じるプッシュダウン現象に起因する表示性能の低下を抑制できる。 - 特許庁
  • To suppress the decrease of obtainable number of chips even when the number of output terminals of a semiconductor chip increases in a LCD driver in which a memory circuit is constituted by a SRAM.
    メモリ回路部をSRAMで構成したLCDドライバにおいて、半導体チップの出力端子数が増加した場合でもチップ取得数の減少を抑制する。 - 特許庁
  • To provide a display that suppresses an increase in possibility of a dot decrease caused by Vth correction, a method of driving the same, and electronic equipment.
    Vth補正に起因して滅点が生じる可能性が増大するのを抑制することの可能な表示装置およびその駆動方法ならびに電子機器を提供する。 - 特許庁
  • To control decrease of life duration by refresh charge in a short period of time when charge-discharge is repeated in an intermediate charge condition which is not in an overcharged condition.
    過充電状態でない中間充電状態で充放電を繰り返す際に、短時間でのリフレッシュ充電によって、寿命が低下することを抑制する。 - 特許庁
  • To further decrease required memory capacity in automatically recording video images using the history of a channel which is viewed or video-recorded by a user, in a recording apparatus.
    記録装置において、ユーザの視聴または録画したチャンネルの履歴を用いて自動的に録画を行なう際に、必要とされるメモリ容量をより少なくする。 - 特許庁
<前へ 1 2 .... 28 29 30 31 32 33 34 35 36 .... 108 109 次へ>

例文データの著作権について

  • 経済産業省
    Copyright Ministry of Economy, Trade and Industry. All Rights Reserved.
  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 財務省
    Copyright(C) 財務省
    ※この記事は財務省ホームページの情報を転載しております。内容には仮訳のものも含まれており、今後内容に変更がある可能性がございます。
    財務省は利用者が当ホームページの情報を用いて行う一切の行為について、何ら責任を負うものではありません。