「Course」を含む例文一覧(14403)

<前へ 1 2 .... 265 266 267 268 269 270 271 272 273 .... 288 289 次へ>
  • (2) A person who engages in Specially Permitted Businesses for Qualified Institutional Investor, etc. (meaning performing in the course of trade any of the acts listed in the items in the preceding paragraph; the same shall apply hereinafter) (excluding Financial Instruments Business Operators, etc.) shall, in advance, notify the Prime Minister of the following matters, pursuant to the provisions of a Cabinet Office Ordinance:
    2 適格機関投資家等特例業務(前項各号に掲げる行為のいずれかを業として行うことをいう。以下同じ。)を行う者(金融商品取引業者等を除く。)は、あらかじめ、内閣府令で定めるところにより、次に掲げる事項を内閣総理大臣に届け出なければならない。 - 日本法令外国語訳データベースシステム
  • (i) to provide its members and Financial Instruments Intermediary Service Providers (limited to those whose Entrusting Financial Instruments Business Operators, etc. include its members; hereinafter the same shall apply in this Section) with guidance and recommendation and to conduct other activities, for the purpose of having them observe the provisions of this Act and other laws and regulations in the course of conducting Financial Instruments Business:
    一 金融商品取引業を行うに当たり、この法律その他法令の規定を遵守させるための会員及び金融商品仲介業者(会員を所属金融商品取引業者等とするものに限る。以下この節において同じ。)に対する指導、勧告その他の業務 - 日本法令外国語訳データベースシステム
  • Article 87-8 An Officer (in cases where the officer is a juridical person, a person who performs duties of officers) or employee of a Financial Instruments Exchange, or a board member, auditor or employee of a Self-Regulation Organization or a person who was formerly in such position shall not divulge to another person or misappropriate any confidential information which he/she has learned during the course of his/her duties.
    第八十七条の八 金融商品取引所の役員(役員が法人であるときは、その職務を行う者)若しくは職員若しくは自主規制法人の理事、監事若しくは職員又はこれらの職にあつた者は、その職務に関して知り得た秘密を他に漏らし、又は盗用してはならない。 - 日本法令外国語訳データベースシステム
  • (2) An Officer (when an Officer is a juridical person, a person who should conduct its duties) or employee of a Financial Instruments Clearing Organization, or a person who was formerly in such position shall not utilize information which he/she has learned during the course of his/her duties for a purpose other than for the business of the Financial Instruments Clearing Organization.
    2 金融商品取引清算機関の役員(役員が法人であるときは、その職務を行うべき者)若しくは職員又はこれらの職にあつた者は、その職務に関して知り得た情報を、金融商品取引清算機関の業務の用に供する目的以外に利用してはならない。 - 日本法令外国語訳データベースシステム
  • (i) an Officer (in cases where the accounting advisor is a juridical person, a member of the accounting advisor), agent, employee or other worker (hereinafter referred to as "Officers, etc." in this and the following Article) of the Listed Company, etc. (including its Parent Company and Subsidiary Companies; hereinafter the same shall apply in this paragraph): where such Officers, etc. has come to know a material fact in the course of his/her duty;
    一 当該上場会社等(当該上場会社等の親会社及び子会社を含む。以下この項において同じ。)の役員(会計参与が法人であるときは、その社員)、代理人、使用人その他の従業者(以下この条及び次条において「役員等」という。) その者の職務に関し知つたとき。 - 日本法令外国語訳データベースシステム
  • Article 316-28 (1) When the court considers it necessary during the course of the proceedings, the court may, after hearing the opinions of the public prosecutor and the accused or his/her counsel and after the first trial date, put the case, on a ruling, into an inter-trial arrangement proceeding as preparation for the trial to arrange the issues and evidence of the case.
    第三百十六条の二十八 裁判所は、審理の経過にかんがみ必要と認めるときは、検察官及び被告人又は弁護人の意見を聴いて、第一回公判期日後に、決定で、事件の争点及び証拠を整理するための公判準備として、事件を期日間整理手続に付することができる。 - 日本法令外国語訳データベースシステム
  • Article 5 Notwithstanding the provisions of the preceding Article, a person who has met any of the requirements set forth in either of the following items and who is certified by the Minister of Justice as having thereinafter completed a training course for attorney services, as designated by the Minister of Justice and implemented by a juridical person as specified in an Ordinance of the Ministry of Justice, shall be qualified to become an attorney.
    第五条 法務大臣が、次の各号のいずれかに該当し、その後に弁護士業務について法務省令で定める法人が実施する研修であつて法務大臣が指定するものの課程を修了したと認定した者は、前条の規定にかかわらず、弁護士となる資格を有する。 - 日本法令外国語訳データベースシステム
  • (i) Commodity Market pertaining to a Listed Commodity- Persons who have, in the course of trade, engaged in the buying and selling of goods included in said Listed Commodity (hereinafter referred to as "Listed Commodity Component Products"), acted as introducing brokers, intermediaries or agents for the buying and selling, or engaged in the production, the processing or the use (hereinafter referred to as the "Buying and Selling, etc.") of such goods for one year or more on a continuous basis
    一 上場商品に係る商品市場 一年以上継続して当該上場商品に含まれる物品(以下「上場商品構成物品」という。)の売買、売買の媒介、取次ぎ若しくは代理、生産、加工又は使用(以下「売買等」という。)を業として行つている者 - 日本法令外国語訳データベースシステム
  • (a) A person who, in the course of trade, engages in the Buying and Selling, etc. of Listed Commodity Component Products (including items that are the main ingredient or material of the Listed Commodity Component Products or items where the main ingredient or material is the Listed Commodity Component Products which are specified by the articles of incorporation) on the Commodity Market
    イ 当該商品市場における上場商品構成物品(当該上場商品構成物品の主たる原料若しくは材料となつている物又は当該上場商品構成物品を主たる原料若しくは材料とする物で定款で定めるものを含む。)の売買等を業として行つている者 - 日本法令外国語訳データベースシステム
  • Measurement of the position and course of an aircraft and calculation of air navigation data in a method other than celestial observation on board an aircraft (except in the case of engaging the above measurement and calculation on board an aircraft which engages in a flight over the section of more than 1,300 kilometer long, where ground references or air navigation facilities cannot be fully used because of navigational conditions)
    航空機に乗り組んで天測による以外の方法で航空機の位置及び針路の測定並びに航法上の資料の算出を行うこと(航法上、地上物標又は航空保安施設の利用が完全でない飛行区間が千三百キロメートルをこえる航空機に乗り組んで行う場合を除く。)。 - 日本法令外国語訳データベースシステム
  • (b) At least two years of aircraft maintenance experience including at least six months of maintenance of a rotorcraft classified as rotorcraft transport TA or TB class for airworthy specified in the appended document no. 1 if a person has completed the training course of maintenance specified by the minister of land, infrastructure and transportation.
    ロ 国土交通大臣が指定する整備に係る訓練課程を修了した場合は、附属書第一に規定する耐空類別が回転翼航空機輸送TA級又は回転翼航空機輸送TB級である回転翼航空機についての六月以上の整備の経験を含む二年以上の航空機の整備の経験 - 日本法令外国語訳データベースシステム
  • (b) At least one year or aircraft maintenance experience including at least six months of maintenance of a rotorcraft classified as rotorcraft transport TA or TB class or for airworthy specified in the appended document no. 1 if a person has completed the training course of maintenance specified by the minister of land, infrastructure and transportation.
    ロ 国土交通大臣が指定する整備に係る訓練課程を修了した場合は、附属書第一に規定する耐空類別が回転翼航空機輸送TA級又は回転翼航空機輸送TB級である回転翼航空機についての六月以上の整備の経験を含む一年以上の航空機の整備の経験 - 日本法令外国語訳データベースシステム
  • (iii) the possession or importation of articles affixed with the registered trademark or a trademark similar thereto, that are used in the course of the provision of designated services or services similar to the designated services or the designated goods by a person who receives the said services, for the purpose of the provision of the said services through use of the said articles;
    三 指定役務又は指定役務若しくは指定商品に類似する役務の提供に当たりその提供を受ける者の利用に供する物に登録商標又はこれに類似する商標を付したものを、これを用いて当該役務を提供するために所持し、又は輸入する行為 - 日本法令外国語訳データベースシステム
  • Article 77 (1) An officer or employee of the Central Association (including a Central Trade Skill Test Commissioner) or a person who has been in these positions shall not divulge or misappropriate any secrets obtained in the course of his/her duties relating to the trade skill tests conducted by the Central Association as prescribed in Article 55, paragraph (2).
    第七十七条 中央協会の役員若しくは職員(中央技能検定委員を含む。)又はこれらの職にあつた者は、第五十五条第二項の規定により中央協会が行う技能検定試験に関する業務に係る職務に関して知り得た秘密を漏らし、又は盗用してはならない。 - 日本法令外国語訳データベースシステム
  • Article 89 (1) An officer or employee of a Prefectural Association (including a Prefectural Trade Skill Test Commissioner) or a person who has been in these positions, shall not divulge or misappropriate any secrets obtained in the course of his/her duties relating to the trade skill tests conducted by the Prefectural Association as prescribed in Article 82, paragraph (2).
    第八十九条 都道府県協会の役員若しくは職員(都道府県技能検定委員を含む。)又はこれらの職にあつた者は、第八十二条第二項の規定により都道府県協会が行う技能検定試験に関する業務に係る職務に関して知り得た秘密を漏らし、又は盗用してはならない。 - 日本法令外国語訳データベースシステム
  • (4) The provisions of the preceding three paragraphs shall apply mutatis mutandis with respect to the reproduction of works in textbooks intended for correspondence courses of senior high schools (including the senior grade course at schools for secondary education) and in teachers' manuals for school textbooks set forth in paragraph (1) (such teachers' manuals shall be limited to those published by the same publisher of the related school textbooks).
    4 前三項の規定は、高等学校(中等教育学校の後期課程を含む。)の通信教育用学習図書及び第一項の教科用図書に係る教師用指導書(当該教科用図書を発行する者の発行に係るものに限る。)への著作物の掲載について準用する。 - 日本法令外国語訳データベースシステム
  • (2) A person must be a graduate of a high school or secondary school accredited under the School Education Act (hereinafter referred to as a "high school, etc.") who completed a mechanical engineering course and, after graduation, must have five years or more of experience in designing, manufacturing, inspecting or operating machines related to the relevant work.
    二 学校教育法による高等学校又は中等教育学校(以下「高等学校等」という。)において機械工学に関する学科を修めて卒業した者で、その後五年以上当該作業に係る機械の設計、製作、検査又は取扱いの業務に従事した経験を有するものであること。 - 日本法令外国語訳データベースシステム
  • (b) A person who has completed and graduated from the regular course of science line of a senior high school or a secondary education school accredited under the School Education Act and has business experiences having engaged in industrial safety service for four years or longer.
    ロ 学校教育法による高等学校(旧中等学校令(昭和十八年勅令第三十六号)による中等学校を含む。以下同じ。)又は中等教育学校において理科系統の正規の学科を修めて卒業した者で、その後四年以上産業安全の実務に従事した経験を有するもの - 日本法令外国語訳データベースシステム
  • (2) A person prescribed by the preceding paragraph shall, when having changed the permanent address or, submit an application document for change of the skill training course completion certificate (Form No. 18) to the registered training institution that issued the certificate, and thereby revise the certificate excluding a case prescribed by paragraph (3).
    2 前項に規定する者は、本籍又は氏名を変更したときは、第三項に規定する場合を除き、技能講習修了証書替申込書(様式第十八号)を技能講習修了証の交付を受けた登録教習機関に提出し、技能講習修了証の書替えを受けなければならない。 - 日本法令外国語訳データベースシステム
  • (a) A person who has majored in and graduated from an engineering course of a university or a technical collage accredited under the School Education Act, and has experiences having engaged in the work of checkup or maintenance of a power press for two years or longer or design or manufacture of a power press for five years or longer.
    イ 学校教育法による大学又は高等専門学校において工学に関する学科を専攻して卒業した者で、動力プレスの点検若しくは整備の業務に二年以上従事し、又は動力プレスの設計若しくは工作の業務に五年以上従事した経験を有するもの - 日本法令外国語訳データベースシステム
  • (b) A person who has majored in and graduated from an engineering course of a senior high school or a secondary education school accredited under the School Education Act and has experiences having engaged in the work of checkup or maintenance of a power press for four years or longer or design or manufacture of a power press for seven years or longer.
    ロ 学校教育法による高等学校又は中等教育学校において工学に関する学科を専攻して卒業した者で、動力プレスの点検若しくは整備の業務に四年以上従事し、又は動力プレスの設計若しくは工作の業務に七年以上従事した経験を有するもの - 日本法令外国語訳データベースシステム
  • (b) A person who has majored in and graduated from an engineering course of a senior high school or a secondary education school accredited under the School Education Act and has experiences having engaged in the work of checkup or maintenance of a forklift for four years or longer or design or manufacture of a forklift for seven years or longer;
    ロ 学校教育法による高等学校又は中等教育学校において工学に関する学科を専攻して卒業した者で、フオークリフトの点検若しくは整備の業務に四年以上従事し、又はフオークリフトの設計若しくは工作の業務に七年以上従事した経験を有するもの - 日本法令外国語訳データベースシステム
  • (iii) A person who has completed the training (excluding the one conducted by correspondence) of the construction machines operation course listed in the column of training courses of Appended Table 4 of the Enforcement Ordinance on the Human Resources Development and Promotion Act, among the basic training or the ability redeveloping training which are the statutory training of paragraph (1) of Article 27 of the Human Resources Development and Promotion Act
    三 職業能力開発促進法第二十七条第一項の準則訓練である普通職業訓練のうち職業能力開発促進法施行規則別表第四の訓練科の欄に掲げる建設機械運転科の訓練(通信の方法によつて行うものを除く。)を修了した者 - 日本法令外国語訳データベースシステム
  • (ii) A person who has completed the training (excluding the one conducted by correspondence) of slinger training course listed in the column of training courses of Appended Table 4 of the Enforcement Ordinance on the Human Resources Development and Promotion Act, among the basic training or the ability redeveloping training which are the statutory training of paragraph (1) of Article 27 of the Human Resources Development and Promotion Act
    二 職業能力開発促進法第二十七条第一項の準則訓練である普通職業訓練のうち職業能力開発促進法施行規則別表第四の訓練科の欄に掲げる玉掛け科の訓練(通信の方法によつて行うものを除く。)を修了した者 - 日本法令外国語訳データベースシステム
  • (ii) A person who has majored in and graduated from a chemistry, a mining or a civil engineering course of a university, a technical college, a senior high school or a secondary education school accredited under the School Education Act, and has experiences having engaged in the work of concrete breaking using concrete breaker for one year or longer thereafter
    二 学校教育法による大学、高等専門学校、高等学校又は中等教育学校において応用化学、採鉱又は土木に関する学科を専攻して卒業した者で、その後一年以上コンクリート破砕器を用いて行う破砕の作業に従事した経験を有するもの - 日本法令外国語訳データベースシステム
  • (ii) A person who has majored in and graduated from a civil engineering, an architecture or a shipbuilding course of a university, a technical college, a senior high school or a secondary education school accredited under the School Education Act, and has experiences having engaged in the work related to assembling, dismantling or altering of scaffolding for two years or longer thereafter
    二 学校教育法による大学、高等専門学校、高等学校又は中等教育学校において土木、建築又は造船に関する学科を専攻して卒業した者で、その後二年以上足場の組立て、解体又は変更に関する作業に従事した経験を有するもの - 日本法令外国語訳データベースシステム
  • This slitter device 10 includes: a slitter body 12 having the cutting blade 16 for cutting a wide web W1 to a plurality of narrow tapes W2 in the course of transporting and the transport roller 18 for transporting the plurality of narrow tapes cut by the cutting blade; and a slitter driving part 14 for driving the cutting blade and the transport roller.
    幅広のウェブW1を搬送しながら複数の幅狭のテープW2に裁断する裁断刃16と、裁断刃により裁断された複数の幅狭のテープを搬送する搬送ローラ18とを有するスリッタ本体部12と、裁断刃及び搬送ローラを駆動するためのスリッタ駆動部14とを備えるスリッタ装置10。 - 特許庁
  • To specify the course of the loss of money if there is difference between the money obtained from the information from a dispenser and the actually collected money at least by specifying the dispenser having made the loss and storing the history information on the hour of opening of an open/close lid of the specified dispenser.
    貸出機からの情報により取得した金額と、実際に回収した金額とに食い違いがあった場合に、少なくとも、紛失のきっかけとなった貸出機の特定と、当該特定された開閉蓋の開放時刻との履歴情報を記憶しておくことで、金銭の紛失の経緯を特定する。 - 特許庁
  • A printed product (2) is loaded to a cutting position and fixed with a feedable pressing piston (5) for cutting with by driven type cutting blade (6), and in this course, the pressing piston applies stretching pressure acting on at least the topmost paper sheet of the printed product (2) when the surface (9) of the pressing piston (5) abuts on the printed product (2).
    印刷製品(2)を裁断位置に装填して被駆動式の裁断刃(6)による裁断に際して送り動作可能な押圧ピストン(5)によって固定し、その際前記押圧ピストン(5)がその表面(9)の印刷製品(2)への当接に際して少なくとも印刷製品(2)の最上の紙葉に作用する伸張圧力を付加する。 - 特許庁
  • Then, soil particles having particle size less than approximately 0.075 mm flowing down from the flowing down course W2 through an inclined plane of an inclined plate 43a are mixed with soil particles having particle size larger than approximately 0.075 mm moved to a first duct 41b within the range from approximately 12% to approximately 14% to produce a surface layer material H.
    その後、傾斜板43aの傾斜面43a1によって、流下経路W2を流下する略0.075mm以下の粒径の土粒子が第1ダクト41bへ排出される略0.075mmより大きな粒径の土粒子に略12%から略14%の範囲で混入されて、表層材Hが生成される。 - 特許庁
  • In the process of drying, the storage of a prescribed amount of water in an outer tub and the operation of prescribed time are executed by prolonging the time or reducing a water amount to be stored in the outer tub as it is the condition that the friction of the laundry inside an inner tub is larger for the amount of the laundry and the course of the operation.
    乾燥を行う行程で、外槽に所定量の水を貯め、所定時間の運転を行うのを、洗濯物の量や運転のコースにつき、内槽内における洗濯物の摩擦が多い条件であるほど、時間を長くし、又は外槽に貯める水量を少なくして実行するようにした。 - 特許庁
  • To provide a herbicide composition or a plant growth regulator composition which is a composition having a wide herbicidal spectrum to various weeds, is effective to weeds generated in non-crop land, and shows excellent control effect and selectivity in a low dose, particularly when it is used on a golf course and the like.
    種々の雑草に対して幅広い殺草スペクトラムを有する組成物であり、非農耕地に発生する雑草に対して有効であると共に、特にゴルフ場などで使用する場合、低薬量で優れた防除効果及び選択性を示す除草剤組成物又は植物成長調節剤組成物を提供する。 - 特許庁
  • An exterior film 2a is torn in mid-course by notches 2f for tearing so as to be able to divide into two parts and interior films 2b and 2c located on the inside of laver 1 and cylindrically rolled are divided in the middle in longitudinal direction of sheet to constitute a bag-like sheet body 2 as a constitution in which edges are superposed.
    外装フィルム2aを、引き裂き用ノッチ2f,2fを付与して中途で引き裂いて二分できる構成とし、海苔1の内側にきて円筒巻きする内装フィルム2b,2cを、シート長尺方向の中程で分断していて端縁同士が重なる構成として袋状シート本体2を構成する。 - 特許庁
  • In a dot impact printer which conveys a recording medium on the basis of an indication transmitted from the host computer 80 and records an image to the recording medium by a recording head 18, an end detecting sensor 52 which detects the recording medium is installed on a conveyance course of the recording medium headed towards the recording head 18.
    ホストコンピュータ80から送信される指示に基づいて記録媒体を搬送するとともに、記録ヘッド18によって記録媒体に画像を記録するドットインパクトプリンタにおいて、記録ヘッド18に向かう記録媒体の搬送経路上に、記録媒体を検出する端検出センサ52を設けた構成とする。 - 特許庁
  • While the chemicals are prepared by dissolving the gas used in a general industry into pure water or a mixed solution stored in a chemicals preparing tank 21, at least either an exhaust gas controller 23 controlling the amount of exhaust gas or an exhaust water controller 24 draining the specified amount of chemicals from a gas dissolving part is used at the same time in the course of the dissolving process.
    一般工業にて使用されるガスを薬品製造タンク21に貯えた純水又は混合液に溶解させて薬品を製造するとともに、排気の量を制御する排気制御部23、及び、ガス溶解部から一定量の薬品を排水する排水制御部24の少なくとも一方を同時に実施する。 - 特許庁
  • A riding simulator 10 including a two-wheeled vehicle 40 capable of being operated to travel and a display 32 on which an image corresponding to operator's operation on a preliminarily set course is projected in front of the two-wheeled vehicle 40, is provided with a travel indicator 150 which is displayed on the display 32 and shows a current traveling state.
    走行操作が可能な二輪車40と、予め設定されたコース上での操作者による操作に応じた映像を二輪車40の前方に投影するディスプレイ32とを有するライディングシミュレータ10において、ディスプレイ32に表示されて現在の走行状態を示す走破インジケータ150を備える。 - 特許庁
  • The fermented food that has a number of microorganisms such as lactic acid bacterium, etc., in a high level, is useful for health and has slight sour taste and an excellent flavor is obtained by quickly lowering or raising a temperature at pH≥5.5 so as to make the fermented substance of soybean milk at the vicinity of pH 5.3-6 in the course of fermentation.
    発酵過程において、pHが5.5以上で温度を急低下又は急上昇させる事により、発酵豆乳のpHを5.3〜6付近とする事が可能で、これによって、乳酸菌等の菌数レベルが高く健康に有用で、かつ酸味が少なく風味良好な食品が提供し得る。 - 特許庁
  • Even in the course of the changeover movement of the changeover valve 1, the auxiliary valve 40 stops the tank T from communicating with a tank port part 12 until a poppet seat part 7 closes the tank port part 12, and the auxiliary valve 40 stops the accumulator 30 from communicating with a high-pressure port part 13 until the poppet seat part 7 closes the high-pressure port part 13.
    これにより切換弁1の切換動作中であっても、ポペットシート部7がタンクポート部12を閉止するまでは、補助弁40がタンクTとタンクポート部12の連通を閉止し、またポペットシート部7が高圧ポート部13を閉止するまでは、補助弁40がアキュムレータ30と高圧ポート部13の連通を閉止する。 - 特許庁
  • To provide a method and device for cooling the side wall of furnace bottom in a blast furnace by which the cooling protection of the side wall brick is strengthened without newly installing a cooling body on the side wall of the furnace bottom, without installing a cooling machine in a circulating course and without causing any trouble to cool the side wall even in the case of damaging the cooling machine.
    炉底側壁に新たに冷却体を設置する必要がなく、循環経路に冷却機を設置する必要がなく、冷却機が故障しても側壁の冷却に支障をきたさないで側壁レンガの冷却保護を強化するための高炉炉底側壁冷却方法及び装置を提供する。 - 特許庁
  • To provide a life clock, concerning life administration of living, while recognizing the whole picture of a self goal age to live and the time allowed left-behind life every day, verifying to adjust circumstances the self occupies via his present position of life, to exclude a life of letting it take its own course.
    本発明は、なりゆき人生を排除するために、自己の生存目標年齢や残された人生の持ち時間の全容を日々に認識し、自分がいま人生のどの位置にどのような状況にあるかを常に検証・調整しながら歩むための、人生管理に関する人生時計を提供する。 - 特許庁
  • In the course of the closing operation of window glass 11 driven by the motor 2, if the rotation speed of the motor 2 decelerates and the deceleration change value exceeds a threshold value, the controller 3 judges that something is caught by the window glass and controls the operation of driving motor 2 so as to release it caught by the window glass.
    コントローラ3は、駆動モータ2の駆動によるウインドガラス11の閉作動時に該駆動モータ2の回転速度が低下した際の該回転速度の変動値がしきい値を超えると挟み込みが生じたと判定し、ウインドガラス11にて挟持した異物を解放可能とすべく駆動モータ2を制御する。 - 特許庁
  • In a cast-in-place pile construction method completed by cutting and covering the existing structure 21, drilling a ground, inserting a bag body 2 into a pit 22 and injecting the self-hardening fluid into the bag body 2, the bag body 2 has course meshes capable of discharging the excess water of the self-hardening fluid.
    既設構造物21を開削した後、地盤に削孔し、孔22内に袋体2を挿入し、袋体2内に自硬性流体を注入することにより完成する場所打ち杭工法において、袋体2が、自硬性流体の余剰水を排出することのできる目の粗さを有するものとする。 - 特許庁
  • When forming the sacrifice layer 2, the sacrifice layer 2 is formed so that the opposite ends of the sacrifice layer 2 reach a virtual formation region VS in the silicon substrate 1 of a minimal quadrangular-pyramid-shaped recess 11 which communicates with each etching hole 7 and is formed in the main surface of the silicon substrate 1, in the course of anisotropic etching for forming the recess 12.
    犠牲層2の形成時には、凹所12を形成する異方性エッチングの途中でエッチングホール7ごとに連通しシリコン基板1の主表面に形成される最小の四角錘状凹部11のシリコン基板1における仮想形成領域VSに犠牲層2の両端が達するように犠牲層2を形成する。 - 特許庁
  • To remove pollutants at an extremely low cost, with efficiency and in a short period of time because the pollutants stuck into soil can be removed by making a highly concentrated polluted-soil collide with a driven high pressure water in the course of sucking the highly concentrated polluted-soil from the ground by a gas mixed jet pump and sending it by pressure in a pipe.
    高濃度汚染された土壌を混気ジェットポンプにて地盤中から吸引し管体内を圧送する過程で、駆動高圧水と衝突させることによって、土壌に付着した汚染物質を除去するので、極めて低コスト、且つ効率的に、短期間で汚染物質を除去することができる。 - 特許庁
  • In this case, this heating cooker can divide the heating course, based on the information on the weight by the weight sensor, and perform fine control, based on the temperature information by the infrared ray temperature sensor, so this can heat and cook food into favorable finished state to the utmost, regardless of the quantity and state of the food.
    この場合、重量センサによる重量の情報に基づいて加熱コースを分け、各加熱コースにおいて、赤外線温度センサによる温度情報に基づき細かな制御をすることができるので、食品の量や状態などにかかわらず、極力良好な仕上がり状態に加熱調理することが可能となる。 - 特許庁
  • The expansible leg consists of a leg body 101, the drawing leg 102 movably held in the direction of the length by the leg body 101 and capable of being drawn downward from the lower end of the leg body 101 and a lock pin 103 held on the leg body 101 so that it is movable to a moving course of the drawing leg 102.
    伸縮脚は、脚本体101と、脚本体101にこれの長さ方向に移動自在に保持されかつ脚本体101の下端からその下方に引出されうるようになされている引出脚102と、引出脚102の移動経路に対し進退しうるように脚本体101側に保持されているロックピン103とよりなる。 - 特許庁
  • In addition, if a changing border from the reaction layer exposure domain B to the current collector exposure domain C is detected by the sensor 56, based on this timing, the shutter 42 which was opened a watercourse 41a protrude in a water course 41a and the channel 41a is closed and the drive of the feed pump 55 is stopped.
    また、センサ56により反応層露出域Bから集電体露出域Cに変わる境界が検出されると、そのタイミングに基づいて流路41aを開放していたシャッタ42が流路41a内に突出して流路41aが閉鎖されると共に、供給ポンプ55の駆動が停止される。 - 特許庁
  • To provide an electrophotographic photoreceptor which has high durability against repeated usage for long term and with which the image density decrease or image deterioration due to image blur is suppressed and not only the variation in course of day of an exposure part potential but also the variation in job is suppressed and images of high quality can be stably obtained.
    長期間の繰り返し使用に対しても高耐久性を有し、かつ画像濃度低下、あるいは画像ボケの発生による画像劣化を抑制し、さらに露光部電位の日内変動のみならず、Job内変動を抑制し、高画質画像が安定に得られる電子写真感光体を提供する。 - 特許庁
  • To provide an operation unit for massage machine capable explaining the operation procedure, course contents and an operation state by voice matching with LED display and liquid crystal display, facilitating handling, eliminating the need of provided a part to display them on a liquid crystal display part and reducing the size of the operation unit.
    LED表示や液晶表示に合わせて音声にて操作手順やコース内容説明や動作状態説明をすることができて取り扱いが容易になり、またこれらのことを表示する部分を液晶表示部に設ける必要がなくなって操作器のサイズを小さくできるマッサージ機の操作器を提供する。 - 特許庁
  • When a control system becomes unstable in the course of gain setting, the feedback signal to the amplifier 132 is switched to a picture element signal voltage S2, a feedback coefficient of the switch 140 is so set that response of a feedback constant becomes slow, and in this state, the gain of the amplifier 134a is set again if necessary.
    ゲイン設定中に制御系が不安定になったときは、負帰還増幅器132 への帰還信号を画素信号電圧S2に切り替え、フィードバック定数を応答が遅くなるよう帰還係数切替部140 の帰還係数を設定し、必要に応じてこの状態でゲイン設定増幅器134aのゲインを再設定する。 - 特許庁
<前へ 1 2 .... 265 266 267 268 269 270 271 272 273 .... 288 289 次へ>

例文データの著作権について