「Is Using」を含む例文一覧(50000)

<前へ 1 2 .... 398 399 400 401 402 403 404 405 406 .... 999 1000 次へ>
  • To provide a disposable mascara applicator of which a mascara liquid is exhausted by using three times or less in consideration of the sanitation and health of the eyes.
    目の衛生と健康を配慮し、多くても3回程度でマスカラ液を使い切れる使い捨て用マスカラ塗布具の提供。 - 特許庁
  • To provide a backlight unit that is thin and lightweight and ensures high luminance and high luminance uniformity, and to provide a video display device using the backlight unit.
    薄型、軽量、高輝度、輝度均一性の高いバックライトユニットおよびこれを用いた映像表示装置を提供すること。 - 特許庁
  • The thin film for a color display device consists of silicon carbide and/or diamond-like carbon, and the combiner is produced by using the thin film.
    炭化珪素および/またはダイヤモンド状炭素からなるカラー表示装置用薄膜およびこの薄膜を用いたコンバイナー。 - 特許庁
  • To provide a preparation process by which an azo pigment dispersion having uniform small particle diameters is prepared by using a simple process.
    簡易な工程を用いて小粒径で、かつ粒径の揃ったアゾ顔料分散体を製造し得る製造方法を提供する。 - 特許庁
  • Curvature of a road type is estimated with an interacting multiple model IMM algorithm using models of different road types.
    道路種類の曲率は、異なる道路種類のモデルを使用する相互作用多重モデルIMMアルゴリズムによって推定される。 - 特許庁
  • Further, the course corresponding to the connection state of the track circuit is discriminated using the course relationship track circuit data 19.
    さらに進路関係軌道回路データ19を用いることで、軌道回路の接続状態に対応する進路が判別される。 - 特許庁
  • To provide an inkjet recording medium which is excellent in whiteness and inkjet recording characteristics using a dye ink or a pigment ink.
    白色度が優れ、染料インク、および顔料インクによるインクジェット記録特性が良好であるインクジェット記録媒体の提供。 - 特許庁
  • If the order acceptance result period is 18 months or more, the management computer 21 performs peak determination processing by using principal component analysis.
    受注実績期間が18ヶ月以上の場合、管理コンピュータ21は主成分分析を用いてピーク判定処理を行なう。 - 特許庁
  • The dissolved organic or soluble material is eliminated using an air venting or pumping system such as a vacuum system.
    バキューム・システムなどのエアー・ベントまたはポンピング・システムを使用しながら、溶解した有機または可溶性の材料が除去される。 - 特許庁
  • The first terminal 113 of a voice input pin plug 110 is constituted as a flexible terminal 116 using a spring coil.
    音声入力用ピンプラグ110の1番端子113をスプリングコイルを用いた可撓性端子116として構成する。 - 特許庁
  • The central mirror surface 29 of the mirror part 47 is directed toward the selected direction by using magnets 53, 54 and a coreless coil.
    磁石53、54および空心コイル89を使ってミラー部47の中央ミラー面29を選択した方向に向ける。 - 特許庁
  • A shield structure is realized using a shield member 25 for collectively surrounding a pair of insulation wire cores 23 and a copper wire 24.
    一対の絶縁線心23及び銅電線24を一括して包み囲むシールド部材25を用いてシールド構造を実現する。 - 特許庁
  • The solar energy taken in by a solar panel disposed at a hair dryer body is converted into electric power and used without using an electric outlet.
    ヘアドライヤー本体に配設したソーラーパネルで取り込んだ太陽光エネルギーを電力に変換し、コンセントを使わずに使用する。 - 特許庁
  • This table is concerned with a suction table 10 holding an article having a roughly flat surface by means of decompression and absorption using a pump 26.
    ほぼ平坦な面を有する物品を、ポンプ26を用いた減圧吸着によって保持する吸着テーブル10である。 - 特許庁
  • The intersection and the pedestrian crossing part is paved by using a new material mixing a crusher run of coral and granite (white) with pitch.
    珊瑚と御影石(白)のクラッシャーランとピッチを混合した新素材を用いて交差点と横断歩道部分を道路舗装する。 - 特許庁
  • On the other hand, power supply voltage V_DD (3.3 V) of the CPU 102 is created by a regulator 114 by using the V_CC1 (5 V).
    また、CPU102の電源電圧V_DD(3.3V)を、V_CC1(5V)を利用してレギュレータ114によって生成する。 - 特許庁
  • The information of a network terminal is acquired by using a physical address assigned to a network device in a data link layer lower than an IP protocol.
    IPプロトコルよりも下位のデータリンク層でネットワークデバイスに付与される物理アドレスを利用して、ネットワーク端末の情報を得る。 - 特許庁
  • Then, the position in the Z axis direction of the ferrule holder 3 is measured using a laser beam to determine the welding position in the Z axis direction.
    次いで、フェルールホルダ3のZ軸方向の位置をレーザ光を用いて測定して、Z軸方向の溶接位置を決定する。 - 特許庁
  • Each frame is sequentially formed by using odd number fields and even number fields of the left/right images of each frame, as shown in Figure E.
    そしてEに示すように各フレームの左右画像の奇数フィールドと偶数フィールドとで順次各フレームが形成される。 - 特許庁
  • The functional composite body or the formed body is formed using the photocatalyst composition.
    該変性光触媒と樹脂とからなる光触媒組成物、及びそれから形成される機能性複合体あるいは成形体。 - 特許庁
  • To prevent film reduction due to erosion, when an unwanted electrode film is removed using chemical mechanical polishing(CMP) method.
    化学的機械的研磨(CMP)法を用いて不要な電極膜を除去する際のエロージョンによる膜減りの発生を防止する。 - 特許庁
  • The tile 3 is bonded to the front face of a panel 1 through the hot melt resin tape 2 using a high-frequency induction heating device.
    パネル1の前面にホットメルト樹脂テープ2を介してタイル3が高周波誘導加熱装置4を用い接着される。 - 特許庁
  • Thus, information for handling is written into the trays in a visually recognizable fashion--even further in such a manner as to facilitate the re-using thereof.
    これにより、トレーにも取扱の為の情報が視認可能な状態で而も再利用の容易な状態で書き込まれる。 - 特許庁
  • By means of such a light performance part 40, the game is more effectively performed with light by using the less components.
    こうした光演出部40により、光による遊技の演出を少ない部品点数でより効果的に行なうことができる。 - 特許庁
  • The dielectric filter is configured by using a plurality of stages of the dielectric resonators to realize a low cost and downsizing.
    この誘電体共振器を複数段用いて誘電体フィルタを構成することにより低コストかつ小型化を実現する。 - 特許庁
  • The integrated circuit inductor (5) is formed by interconnecting various metallic layers (10) in an integrated circuit using a continuous via (200).
    集積回路インダクタ(5)は集積回路内のさまざまな金属層(10)を連続ビア(200)により相互接続して形成される。 - 特許庁
  • Among the server function parts, data communication using the logic IP addresses is allowed via a common interface part 25.
    サーバ機能部間において、共通インターフェース部25を仲介して、論理IPアドレスを用いたデータ通信が可能とされている。 - 特許庁
  • The silicon oxide film is deposited with the plasma using a process that has simultaneous deposition and sputtering components.
    酸化シリコン膜は、同時堆積成分とスパッタリング成分を有するプロセスを用いてプラズマにより酸化シリコン膜が堆積される。 - 特許庁
  • To reduce standby power, without using an IC of low standby power but which is high cost, in a charger of a secondary battery.
    二次電池の充電器において、コストの高い低待機電力化対応のICを使わずに待機電力を削減する。 - 特許庁
  • By the identification of an edge position using differential of a regeneration signal, a direct current component is detected from the level of the middle point of the edge.
    再生信号の微分を用いてエッジの位置を特定し、そのエッジの中点のレベルから直流成分を検出する。 - 特許庁
  • Alternatively, the device using the combination of the CCD camera and the telecentric optical system is used for the pick-up of the end face image.
    あるいは、端面画像の取り込みにCCDカメラとテレセントリック光学系との組み合わせを利用した装置を使用する。 - 特許庁
  • The electronic imaging apparatus is composed by using optical systems G1, G2, G3, G4, and G5 having at least one reflection surface RF for bending an optical path.
    光路を折り曲げるための反射面RFを少なくとも1面有する光学系G1,G2,G3,G4,G5を用いた電子撮像装置。 - 特許庁
  • The present position of the mobile station is positioned by using radio waves arriving from a plurality of base stations arranged inside a communication area.
    通信エリア内に配置された複数の基地局から到来する電波を利用して移動局の現在位置を測位する。 - 特許庁
  • Using of the single fluid ink as the treating fluid is a simple and convenient method for on-press treating of the material.
    処理流体として単一流体インキの使用は上記した材料のオンプレス処理のための簡単で便利な方法である。 - 特許庁
  • The part adaptable to the percutaneous or mucous membrane absorption of the medicine is manufactured using it.
    またこの発熱体積層材20を用いて薬剤の経皮、経粘膜吸収用途などに適用できる部品を製造する。 - 特許庁
  • Light of a wavelength-variable laser 11 is branched by using optical couplers 13, 15 and 18, and applied to a plurality of sensor sections S1, S2 and Sn.
    波長可変レーザ11の光を光カップラ13,15,18等を用いて分岐し、複数のセンサ部S1,S2,Snに与える。 - 特許庁
  • On a base substrate 1 manufactured in a general manufacturing process, the upper layer 6 is laminated by using a technique of a semiconductor.
    一般的な製法で製造されたベース基板1上に,半導体技術の手法を使用して上層部分6を積層する。 - 特許庁
  • To reduce a burden of producing an LUT which is used in a printer adapted to perform printing by using a color ink and a special glossy ink.
    カラーインクと特殊光沢インクとを用いて印刷を行う印刷装置で使用するLUTの作成負荷を低減する。 - 特許庁
  • The client information is summed up and distributed to the users, so that the users can obtain the using tendency of other users.
    顧客情報は集計されてユーザへ配信されるため、ユーザも他のユーザの利用動向等の情報を得ることができる。 - 特許庁
  • By using the feature of each parameter, a very strong device is constituted for a specific kind of nonstationary noise.
    各パラメータの特徴を利用することで、特定の種類の非定常雑音に対して頑健な装置を構成することができる。 - 特許庁
  • At such a time, test voltage at two steps is set by using the voltage and current characteristic obtained in the first ATVC control.
    このときは、初回のATVC制御で求めた電圧電流特性を用いて二段階の試験電圧を設定する。 - 特許庁
  • This anchor device using a resin concurrently is formed of an anchor 10 and a cylindrical nut 20 for receiving a base part of the anchor 10.
    本発明の樹脂併用アンカー装置は、アンカー10と該アンカーの基部を受け入れる筒状のナット20から形成されている。 - 特許庁
  • A relation Z(m) between the mobility Z of a polymer and its mass m is determined using narrowly distributed polymer mass standards.
    ポリマーの移動度Zとその質量mとの関係式Z(m)は、狭い分布のポリマー質量スタンダードを使用して決定される。 - 特許庁
  • To provide a full color display using an organic EL having big luminance even if the display screen is made fine by increasing the number of picture elements.
    画素数を増やして表示画面を精細にしても輝度の大きな有機ELを用いたフルカラーディスプレイを提供する。 - 特許庁
  • It is possible for the user to easily learn weather prediction by using the weather information processing apparatus 20.
    ユーザは、本発明の気象情報処理装置20を利用することにより、容易に気象予測の学習を行うことができる。 - 特許庁
  • In a direct exposure step, the photoresist film is irradiated with scanned laser light by using a direct exposure machine to be exposed.
    直接露光工程において、直描露光機を用いてレーザ光を走査しながら照射してフォトレジストフィルムの露光を行う。 - 特許庁
  • A first mask pattern (14) is left by etching the first mask film using the reduced second mask pattern as an etching mask.
    縮小された第2のマスクパターンをエッチングマスクとして、第1のマスク膜をエッチングすることにより、第1のマスクパターン(14)を残す。 - 特許庁
  • To provide a technique by which a hydrocarbon is used as a raw material and hydrogen can be produced by using a small-sized pressure-swing adsorption(PSA) apparatus.
    炭化水素を原料とし、小型のPSA装置を用いて、水素を製造しうる技術を提供することを主な目的とする。 - 特許庁
  • When the parameter is set, the television receiver transmits whether to use the parameter, to the server 101, and use points are increased when using the parameter.
    設定した際にそのパラメータを利用するかどうかをサーバ101に送信し、利用した場合は利用ポイントを増加する。 - 特許庁
  • To lock or unlock a connector plug which is inserted into and connected to an adaptor without using a mechanical key in a wiring management apparatus.
    配線管理装置において、機械的キーを用いないで、アダプタに挿入接続されたコネクタプラグをロックし又はアンロックすること。 - 特許庁
<前へ 1 2 .... 398 399 400 401 402 403 404 405 406 .... 999 1000 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.