「REFLECT」を含む例文一覧(3053)

<前へ 1 2 .... 39 40 41 42 43 44 45 46 47 .... 61 62 次へ>
  • To excellently reflect light in an optical waveguide in spite of unnecessitating the inserting treatment of a light converging plane lens or the like and to reduce the influence caused by distorsion of the side surface of core layers and dust entering the core layers or the like.
    光収束用の平面レンズ等の挿入処理を不要としながらも、光導波路における光反射を良好にし、コア層の側面の歪みやコア層内に混入した塵埃等による影響を軽減することができる。 - 特許庁
  • The two laser beams impinge on a half mirror 44A constituting the reflection optical system 40A and pass through the half mirror 44A or reflect thereon, and a laser beam other than that corresponding to each photosensitive drum is intercepted by a light shielding plate 54C or 54Y.
    反射光学系40Aを構成するハーフミラー44Aに入射して透過又は反射した2本のレーザビームのうち各感光体ドラムに対応するレーザビーム以外のレーザビームは、遮光板54C又は54Yにより遮光される。 - 特許庁
  • To provide a failure diagnosing method and a failure diagnosing apparatus that reflect signal amplitude information even on a high-order linear prediction coefficient, analyze features by a larger number of linear prediction coefficients, and can quickly identify a shock sound that is generated.
    高次の線形予測係数にも信号の振幅情報を反映させ、より多数の線形予測係数で特徴を解析し、短い時間に発生する衝撃音を識別できる故障診断方法およびその装置を提供する。 - 特許庁
  • CRYPTREC will monitor the performance of e-government recommended cipers. If necessary, CRYPTREC will advise users of patches or newly discovered vulnerabilities. The e-Government recommended ciphers list will be modified as necessary to reflect these changes.
    電子政府推奨暗号に選定された各暗号の安全性等についての情報収集や評価を行い、必要に応じて修正情報の周知やリストからの削除等の電子政府推奨暗号リストの変更を行う。 - 経済産業省
  • Also, licensees of reactor operation analyze various failures including human errors at the jobsites, and organically reflect the experiences at the jobsites by conducting training for anticipating near misses with the intention of periodically sharing the recurrence prevention measures among workers.
    また、作業現場で発生した、ヒューマンエラーを含めた様々な失敗について分析し、再発防止のための措置を定期的に共有する危険予知訓練を行って、現場での経験の有機的なフィードバックを図っている。 - 経済産業省
  • To summarize, SMEs which have set a high wage level have done so not so much for attracting applicants, but more so to reflect their awareness of high labor productivity level to the wage levels.
    以上を総合すると、高い賃金水準を設定している中小企業は、求職者を惹き付けるためというよりも、労働生産性の水準を意識し、その水準の高さを賃金水準に反映させているといえよう。 - 経済産業省
  • When executing matrix operation M, the CPU 31 refers to a color space tag in order to reflect the matrix operation with color space at the time of image data production and performs the matrix operation using a matrix (M) corresponding to color space written in the file.
    マトリクス演算Mを実行する場合には、画像データ生成時の色空間を反映させるため、CPU31はColorSpaceタグを参照し、書き込まれている色空間に対応するマトリクス(M)を用いてマトリクス演算を実行する。 - 特許庁
  • When performing matrix operation M, the CPU 31 refers to a Print Matching tag in order to reflect the matrix operation with color space at the time of image data production and performs the matrix operation using a matrix (M) corresponding to color space written in the file.
    マトリクス演算Mを実行する場合には、画像データ生成時の色空間を反映させるため、CPU31はPrintMatchingタグを参照し、書き込まれている色空間に対応するマトリクス(M)を用いてマトリクス演算を実行する。 - 特許庁
  • A data reflection program 21 in a secondary host 20 reads the stored data, issues instructions to a secondary DKC 210 in the secondary storage device 200 to reflect the stored data to secondary user data 220, to store update information on secondary log data 230.
    副ホスト20のデータ反映プログラム21は、前記蓄積されたデータを読み出し、副ストレージ装置200の副DKC210に対し命令して副ユーザデータ220に反映させ、更新情報を副ログデータ230に格納する。 - 特許庁
  • The screen 10 has a mat layer 12 which is disposed at a sheet 11 and is used to diffuse and reflect light and a contrast regulating layer 15 which consists of three kinds of colored beads 15A to 15C fastened to the mat layer 12 by an adhesive layer 14.
    スクリーン10は、シート11に設けられ、光を拡散して反射するためのマット層12と、接着層14によってマット層12に固着されている3種類の着色ビーズ15A〜15Cからなるコントラスト調整層15とを備えている。 - 特許庁
  • To provide a release voltage prediction method and a release voltage prediction device capable of readily finding polarization dissolution characteristics that accurately reflect the individual battery differences and using condition of a battery to precisely predict the release voltage value under equilibrium condition.
    バッテリの個体差及び使用状態が正確に反映された分極解消特性を簡易に求めて、平衡状態の開放電圧値を高精度で予測することができる開放電圧予測方法及び開放電圧予測装置を提供する。 - 特許庁
  • To provide a that can quickly transfer only a required image among image data stored in a portable communication terminal, require only simply processing and reflect copyright information before the transmission of the image.
    本発明は、携帯通信端末に格納されている画像送データの中で必要な画像だけを迅速に転送することができ、処理がシンプルで、著作権情報を転送前に反映できる携帯情報端末装置を提供することを目的とする。 - 特許庁
  • The light emitting element 14 is arranged downward on the light axis Ax, and a mirror member 18 to reflect part of a reflected light from a reflector 16 to downward side is installed between the reflector 16 and a projector lens 12 to cover the element from the downward side.
    発光素子14を光軸Ax上において下向きに配置するとともに、これを下方側から覆うリフレクタ16と投影レンズ12との間に、リフレクタ16からの反射光の一部を下方側へ反射させるミラー部材18を設ける。 - 特許庁
  • Each light-emitting diode 5 is arranged in a straight line with its optical axis almost matched to the other, and in front of a light projecting direction of each light-emitting diode 5, a conical mirror 6 to reflect projected light to an irradiating direction is individually placed.
    各発光ダイオード(5)は、光軸を略一致させた状態で直線状に配列されており、各発光ダイオード(5)の投光方向前方には、その投光を放射方向に反射させる円錐状ミラー6がそれぞれ配設されている。 - 特許庁
  • When the code member (20) moves with respect to the detector array (13), the reflectors (22) on the code member (20) reflect light (56 and 80) emitted by the light source (12) to produce circular or elliptical light spots (58) moving across the detector array (13).
    コード部材(20)が検出器アレイ(13)に対して相対的に移動する際に、コード部材(20)上の検出器(22)は光源(12)によって生成された光(56,80)を反射し、検出器アレイ(13)上を移動する円形又は楕円形の光スポット(58)を生成する。 - 特許庁
  • The microcomputer 1 calculates the voltage difference between the both ends of the current detection resistance R1 by using an A/C converter 2, and learns the error of the desired value with respect to the voltage difference to reflect this learning on duty driving of a transistor Tr in performing the current feedback control.
    電流フィードバック制御に際し、マイコン1は、A/D変換器2を用いて電流検出抵抗R1の両端の電圧差を求め、該電圧差に対する目標値の誤差を学習してトランジスタTrのデューティ駆動に反映させる。 - 特許庁
  • To correctly reflect the status of consumable goods, operational status of equipment or the like without affecting the existing control construction based on integrated interface specification such as a BMLinkS or the like, and to limit providing information depending on users.
    BMLinkS等の統合インタフェース仕様に基づく既存の制御の仕組に影響を与えることなく、消耗品の状態、機器の稼動状態等を正確に反映させることができるとともに、ユーザによって情報提供を制限することを目的とする。 - 特許庁
  • To provide a method for monitoring harmful materials and a monitoring/purifying system which quantitatively measure the harmful materials existing in a monitored area on line and in real time and quickly reflect a measured result to operating conditions of a purifying apparatus.
    監視対象区域に存在する有害物をオンラインでリアルタイムに定量計測でき、その計測結果を浄化装置の運転条件に迅速に反映させることができる有害物のモニタリング方法及び監視・浄化システムを提供する。 - 特許庁
  • The imaging system includes a projection lens and a first reflective element, in which the first reflective element is on a transmission path of the image beam, and outside the transmission path of the illumination beam, so as to reflect the image beam to the projection lens.
    結像システムは、投影レンズ及び第一の反射素子を含み、その内、第一の反射素子が映像光束の伝播光路に配置され、且つ、照明光束の伝播光路以外に位置し、映像光束を投影レンズへ反射させる。 - 特許庁
  • To provide an electronic mail system, that gives incentive to a user to view a direct mail, allows a transmitter side to grasp a mail opening result of the direct mail and allows the transmitter side to reflect the result onto transmission object parties and contents of next and succeeding direct mails.
    利用者にダイレクトメールを見るインセンティブを与え、更に、送信側でダイレクトメールの開封結果を把握し、それを次回以降のダイレクトメール送信対象者及び内容に反映させることができる電子メールシステムを提供することを目的とする。 - 特許庁
  • The reflecting skin material 10 includes a reflection layer 11 for reflecting light and the angle-selective transmission layer 12 laminated on the reflection layer and permitting incident light or the light reflected by the reflection layer to transmit or reflect with angle selectivity.
    反射表皮材10は、光を反射する反射層11と、反射層上に積層され、入射する光および反射層で反射した光を角度選択性をもって透過または反射させる角度選択性透過層12と、を含んでいる。 - 特許庁
  • In the alignment mark measuring method, the alignment mark 13 is configured to reflect or transmit light modulated by the modulating means, the light reflected by or transmitted through the alignment mark 13 is detected to acquire the position of the alignment mark 13 based upon a detection signal thereof.
    アライメントマーク13を、変調手段により変調された光を反射または透過するものとし、アライメントマーク13を反射または透過した光を検出し、その検出した信号に基づいてアライメントマーク13の位置を取得する。 - 特許庁
  • A plurality of elongate protrusive reflecting part 5 are protrusively mounted on a reflecting surface of the subreflecting surface 3 at predetermined intervals to reflect down light beam 60 forward and crosswise, thereby illuminance combined with irradiating light is improved.
    副反射面3の反射表面に複数の反射突条5を所定間隔で突設し、バルブ4から出射して副反射面3に向かう下向きの出射光束60を前方且つ横方向に反射させて照射光との照度を向上させる。 - 特許庁
  • To prevent an image from being formed by image data that does not reflect correction according to a change in a state of image forming means, when there is a possibility that a difference in time from acquisition of the image data to formation of the image may vary.
    画像データが取得されてから画像が形成されるまでの時間差にばらつきが生じ得る場合において、画像形成手段の状態の変化に応じた補正が反映されていない画像データによって画像が形成されないようにする。 - 特許庁
  • The aforesaid reflecting element A is arranged so as to reflect the image light incident from a relay optical system 230 toward right and left eyes I as three reflected image light beams.
    このように形成された左右両側板状反射素子Aをリレー光学系230から入射する画像光が当該左右両側板状反射素子Aにより左右眼Iに向けて3本の反射画像光として反射されるように配置する。 - 特許庁
  • The health control device 20A allows the regularity of the report of the vital information, the presence of taking an examination for health, and the sport club utilization frequency to reflect in the point of the customer and calculates the next term premium of the customer based on its total value.
    健康管理装置20Aはバイタル情報の報告が規則的か否かと、健康診断の受診の有無と、スポーツクラブの利用回数とを当該顧客のポイントに反映させ、その累計値に基づいて当該顧客の次期保険料を演算する。 - 特許庁
  • To provide a mulching sheet which can effectively use paper sludge ash of waste, can shade solar light, can randomly reflect the solar light on the surface of the paper, can also efficiently irradiate the lower portions of plants with the solar light, and can be bio-degraded without needing a recovery treatment, after used.
    廃棄物である製紙スラッジ灰を有効利用でき、日光を遮蔽するとともに紙の表面で乱反射し、植物の下部にも効率的に日光があたり、使用後は回収処分しなくとも生分解するマルチシートを提供する。 - 特許庁
  • After performing a radiography to reflect a collimator image at a side edge, this radiographic imaging apparatus corrects the gradients of respective radiographic images P1 and P2 caused by the inclination of the radiographic image detector 3 when radiographing, with the collimator image OC defined as a reference.
    側縁にコリメータ像OCが映り込むように放射線撮影が行われた後、このコリメータ像OCを基準として放射線撮影時の放射線画像検出器3の傾きによる各放射線画像P1、P2の傾きが補正される。 - 特許庁
  • To provide an image display device, etc., with excellent operability which can provide a proper display screen even when an image pickup device is placed at an arbitrary position and correctly reflect the position of an image picked-up spot (auxiliary light) in the display screen.
    撮像装置を任意の位置に置いても適正な表示画面を提供するとともに撮像されたスポット(補助光)の位置を表示画面に正しく反映することができる、操作性が良好な画像表示装置等を提供することである。 - 特許庁
  • The treatment support system detects on a real-time basis an ultrasonic image region of interest in the sectional view of ultrasonic tomography on the basis of the elasticity information and detects a target position (S107), then transmits the target position to reflect in the navigation image (S108 and 109).
    処置支援システムは、弾性情報に基づいて超音波断層面における超音波像関心領域をリアルタイムに検出することによりターゲット位置を検出し(S107)、ナビゲーション画像へ転送して反映する(S108,109)。 - 特許庁
  • The light reflective part 31 is formed to reflect much light for a photoelectric conversion part 61R, relative to photoelectric conversion parts 61B, 61G of the other color components, of which the photoelectric conversion region is deeper than those of the other color components out of the plurality of color components.
    反射部31は、複数の色成分のうちで光電変換領域が他の色成分より深い光電変換部61Rに対して、他の色成分の光電変換部61B,61Gよりも多くの光を反射するように形成されている。 - 特許庁
  • The transparent body is formed with guide surfaces at positions that allow at least the light penetrating the transparent body and being reflected on the surface constituting the distal end surface recess to be reflect in the direction of the distal end of the protrusion parts.
    また、透明体には、透明体内部に入射した光のうち、少なくとも先端面側凹部を構成する面に反射された光を反射可能な位置に、当該光を突起部の先端部に向けて反射する案内面が形成されている。 - 特許庁
  • Further, a routing protocol is used to inform a connected communication apparatus about path information including the setting path cost to reflect the policy on the communication paths while dynamically changing the communication paths in both the normal and abnormity states of the communication paths.
    また、設定した経路のコストを含む経路情報をルーティングプロトコルによって、接続する通信装置に通知することで、通信経路の正常時および異常時を含めて、動的に通信経路を変更しながら、通信経路にポリシーを反映する。 - 特許庁
  • To reflect the internal network topology information in a forwarding table that is reported and set to each data signal processing part that belongs to a functionally distributed communication apparatus while maintaining the interoperability with the conventional communication apparatus existing on the network.
    ネットワーク上に存在する従来型の通信装置との相互運用性を保ちつつ、機能分散型通信装置に帰属する各データ信号処理部に通知および設定されるフォワーディングテーブルには内部ネットワークトポロジ情報を反映させる。 - 特許庁
  • To reflect edition contents in a source program in a short time in a document preparation managing device which has a function preparing a design document from a source program and a function reflecting edition contents performed to the prepared design document in the source program.
    ソースプログラムから設計ドキュメントを作成する機能及び作成した設計ドキュメントに対して行った編集内容をソースプログラムに反映する機能を有するドキュメント作成管理装置に於いて、編集内容をソースプログラムに短時間で反映させる。 - 特許庁
  • To provide a display controller for solving the problem that the size of the display area of items other than a selected item in an attribute for which the item is selected does not reflect the data provided with the item selected in another attribute.
    項目が選択されている属性において、その選択されている項目以外の項目の表示領域のサイズが、他の属性で選択された項目を有するデータを反映していないという問題を解決する表示制御装置を提供する。 - 特許庁
  • This is achieved by varying the radius of curvature of a virtual surface (152) corresponding to a theoretical test surface that would reflect a measurement wavefront to produce a constant optical path length difference (e.g., zero OPD) between the measurement and reference wavefronts.
    これは、測定波面と基準波面の間に一定の光路長差(例えばゼロOPD)を生成するべく測定波面を反射する理論試験表面に対応する仮想表面(152)の曲率半径を変化させることによって達成される。 - 特許庁
  • The control circuit 142 sequentially accesses each RS232C port to monitor the number of interruptions initially and then places the priority on the access sequence depending on the number of the interruptions to reflect it on a time division communication cycle executed by a timing control circuit 141.
    初期時、各RS232Cポートを順次アクセスして割り込み回数を監視し、以降、その割り込み回数に応じてアクセス順位に優先順位を付し、タイミング制御回路141が実行する前記時分割通信サイクルに反映させる。 - 特許庁
  • Synthetic resin emulsion containing an inorganic hollow body b including air inside is at least put on the one side of a curtain base material 11 so as to be 15-200 μm in dry thickness to reflect the near infrared radiation of the sunbeam selectively.
    内部に空気が封入された無機中空体bを含む合成樹脂エマルジョンを、カーテン基材11の少なくとも片面に、乾燥厚さで15〜200μmとなるように塗布してなり、太陽光の近赤外線を選択的に反射することができる。 - 特許庁
  • An indicator-selecting section 13 selects the indicator or combination of indicators representing a maximum information capacity from among a plurality of indicators or combination of indicators as main indicators which most-properly reflect the desired labels and are optimal for estimating the labels, and outputs them.
    指標選択部13は、所望のラベルを最もよく反映し、当該ラベルの推定に最適な主指標として、複数の指標または指標の組の中から、最大の情報量を示す指標または指標の組を選択し、出力する。 - 特許庁
  • To achieve the quantitative evaluation of problem analysis in a product test process, and to reflect the intention of a user on each element for quantitative evaluation, and to automate such operations as the storage, classification and update of a plurality of event data and visualization of the problem.
    製品試験工程等において、問題分析の定量的な評価が行え、定量的評価のための各要素にユーザの意思を反映させるとともに、多数の事象データの蓄積、分類、更新等の作業と問題の可視化を自動化する。 - 特許庁
  • The mirror 30 includes a penetrating passage 32 located in the direction which intersects the reflecting surface 31, and is configured to reflect the reflected light L3 toward the photodiode 20 by the reflecting surface 31 while passing the laser beam L0 through the penetrating passage 32.
    そして、ミラー30は、反射面31と交差する方向の貫通路32を備え、この貫通路32を介してレーザ光L0を通過させる一方で、反射面31により反射光L3をフォトダイオード20に向けて反射する構成をなしている。 - 特許庁
  • To provide an image display, etc., with excelling operability which can provide a proper display screen, even if an imaging apparatus is placed at an optional position and correctly reflect the position of an image picked-up spot (auxiliary light) in the display screen.
    撮像装置を任意の位置に置いても適正な表示画面を提供するとともに撮像されたスポット(補助光)の位置を表示画面に正しく反映することができる、操作性が良好な画像表示装置等を提供することである。 - 特許庁
  • To solve a problem that it is difficult to accurately measure a noise amount because the noise and a motion reflect in a calculated value based on a difference between a preceding frame and a succeeding frame in the case of measuring the noise amount of a video signal within a video region.
    映像信号のノイズ量を映像領域内で測定する際に、前後のフレーム差分に基づいて算出すると、その算出された値はノイズにも動きにも反映される値となり、ノイズ量を正確に測定することは困難である。 - 特許庁
  • The light distribution lens 90 has a function to allow a light entering from the inner side surface 91b of a recess 91 that houses the color conversion member 70 to totally reflect on the outer side surface 90b, and to guide it to the light emitting surface 90a of the light distribution lens 90.
    配光レンズ90は、色変換部材70を収納する凹所91の内側面91bから入射した光を外側面90bで全反射して当該配光レンズ90の光出射面90aに導く機能を有する。 - 特許庁
  • Sec.44 Publication of Patent Application 44.1. The patent application shall be published in the IPO Gazette together with a search document established by or on behalf of the Office citing any documents that reflect prior art, after the expiration of eighteen months from the filing date or priority date.
    第44条 特許出願の公開 44.1特許出願は,出願日又は優先日から18月を経過した後,庁により又は庁のために作成された先行技術を記載した文献を引用する調査書とともにIPO公報において公開する。 - 特許庁
  • An outer reflection surface 2 is so arranged on the circumference of the fan 1 as to reflect blown air of the fan 1 and the blown air, reflected on an opposed reflection surface 3, along the axis of the rotation of the fan 1 and has the titanium (IV) oxide layer on the surface thereof.
    ファン1の送風および対向反射面3から反射した送風をファン1の回転軸線方向に反射するようファン1の周囲に設けられた外側反射面2を有し、外側反射面2は表面に二酸化チタン層を有する。 - 特許庁
  • The optical element 22 includes a primary reflective part (reflector 12) and a secondary reflective part (backside 2E) that reflect incident light, and makes the lights reflected from the primary and secondary reflective parts interfere with each other to produce interference light.
    光学素子22は、入射光を反射させる第1の反射部(反射部12)および第2の反射部(裏面2E)を含み、かつ、第1の反射部からの反射光と第2の反射部からの反射光とを干渉させて干渉光を生じさせる。 - 特許庁
  • In the liquid crystal display element, liquid crystal compositions 21b, 21g, 21r and 21y which can selectively reflect the light having specific wavelength in the visible light are interposed between a pair of substrates 11 and 12 at least one of which is to be the resin substrate.
    少なくとも一方が樹脂基板である一対の基板11、12間に可視光中の特定波長の光を選択反射可能の液晶組成物21b、21g、21r、21yを挟持した反射型液晶表示素子である。 - 特許庁
  • The device has a reflection member 40 directing light emitted from the light emitting means 1 in a direction being almost the same as that of the means 1 to reflect and also the light receiving means 1 at a position where the means 1 can receive the light reflected by the member 40.
    発光手段1から出射した光を該発光手段1の方向とほぼ同一方向に向けて反射する反射部材4_0を有するとともに、該反射部材によって反射した光を受光できる位置に受光手段1を有する。 - 特許庁
<前へ 1 2 .... 39 40 41 42 43 44 45 46 47 .... 61 62 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.
  • 経済産業省
    Copyright Ministry of Economy, Trade and Industry. All Rights Reserved.