int [$size = 2097152] - amount of bytes to buffer
int [$size = 2097152]- バッファのバイト数を指定します。 - PEAR
rdlength- The amount of data (in bytes) of the rdata section
rdlength- rdata セクションのデータ量(バイト単位) - PEAR
This is the first 4 bytes of the chunk. これはチャンクの始めの4バイトです。 - Python
Locks the specified bytes.
指定されたバイト列にロックをかけます。 - Python
function copies n bytes from src to dest .
はsrcから先頭nバイトをdestにコピーする。 - JM
returns the number of bytes placed in buf .
はbufに格納されたバイト数を返す。 - JM
function returns the number of bytes written.
関数は書き込んだバイト数を返す。 - JM
It returns the number of bytes read.
返り値は読み込んだバイト数である。 - JM
Dump WIDTH input bytes per output line. This must be a multiple of
バイトの入力を表示する。 - JM
the field is composed of two or more bytes そのフィールドは複数バイトから成る - コンピューター用語辞典
gives you the size of a file bytes.
ファイルのサイズをバイト数で返します。 - PEAR
This is limited to 1024 bytes. この値は 1024 バイトに制限されています。 - Python
Return the size, in bytes, of path.
ファイルpathのサイズをバイト数で返します。 - Python
nbytes Specifies the number of bytes to be stored.
nbytes 1i格納するバイト数を指定する。 - XFree86
returns the number of bytes transferred to the pipe.
はパイプに転送したバイト数を返す。 - JM
At most len bytes are written to dest.
dest には最大 len バイトまで書き込まれる。 - JM
At most n bytes are written to dest.
dest には最大で n バイトが書き込まれる。 - JM
Bytes and lines are numbered beginning with one.
バイト位置と行番号は 1 から始まる。 - JM
Print the (decimal) offsets and (octal) values of all differing bytes.
違いのある全てのバイトについて、 - JM
For example, `.RES.B .LEN("sample")' reserves six bytes of memory.
例えば、`.RES.B .LEN("sample")' は、 メモリの 6 byte を予約する。 - JM
DEVICE AND METHOD FOR COUNTING NUMBER OF PACKET BYTES パケットバイト数カウント装置及び方法 - 特許庁
Only the required number of bytes are reserved
必要なバイト数だけが確保される - コンピューター用語辞典
The bytes of the string follow. その後に文字列のバイトデータが続きます。 - Python
An MSS of the UECP is set to 1,398 bytes or less, and an MTU thereof is set to 1,438 bytes or less. UECPのMSSは1398バイト以下に設定され、MTUは1438バイト以下に設定されている。 - 特許庁
a few bytes for the gzip file header, plus 5 bytes every 32K block,
最悪の場合、gzip ファイルヘッダのための数バイトと 32K バイトブロック毎に 5 バイトの増加となり、 - JM
holds the size in bytes of each entry.
は各エントリのサイズ (バイト単位) を保持する。 - JM
The argument buf points to bufsiz bytes of core.
引き数bufはbufsizバイトのメモリを指している。 - JM
For ethernet, this value is 1500 bytes.
イーサネットの場合、最大値は 1500 バイトである。 - JM
size, and a B to select normal bytes or a D to select
通常のバイトを意味する B または - JM
Print sizes in megabyte (that 1,048,576 bytes) blocks.
メガバイト (1,048,576 バイト) 単位でサイズを表示する。 - JM
Count bytes rather than columns, so that tabs, backspaces, and
桁数ではなくバイト数をカウントする。 - JM
Return a string containing up to num bytes starting from the current file position; the file position is updated to point after the bytes that were returned. ファイル位置は返したバイトの分だけ後ろの位置へ更新されます。 - Python
Write the bytes in string into memory at the current position of the file pointer; the file position is updated to point after the bytes that were written. メモリ内のファイル・ポインタの現在位置からstringのバイト列を書き込みます。 - Python
Specifies the size of the buffer in bytes.
\\fInbytes\\fP 1iバッファのサイズをバイト数で指定する。 - XFree86
For three bytes, 1/4th of 1/4th of 1/4th, or 1/64th.
3バイトなら、1/4の1/4の1/4、つまり1/64だ。 - Electronic Frontier Foundation『DESのクラック:暗号研究と盗聴政策、チップ設計の秘密』
Set to a fixed value with all bytes equal
すべてのバイトを等しくした固定値に。 - Electronic Frontier Foundation『DESのクラック:暗号研究と盗聴政策、チップ設計の秘密』
# To randomize the last 3 bytes onlymac_eth0="random-ending"
# 最後の3バイトだけランダムに設定します - Gentoo Linux
increments the program's data space by increment bytes.
は、プログラムのデータ空間をincrementバイトだけ増やす。 - JM
argp points to a 8192 byte map, with 32 bytes per character.
argp は、8192 バイト(一文字 32 バイト)のマップを指す。 - JM
bytes, NULL is returned, and errno is set to ENAMETOOLONG .
バイトを超えている場合、NULL が返され、errnoにENAMETOOLONG - JM
The buflen argument specifies the number of bytes available in buf .
buflen引き数にはbufのバイト数を指定する。 - JM
uses at most the first five bytes from pfx .
は最大でpfxの先頭 5 バイトを使用する。 - JM
Emits a concatenation of bytes (no end of string marks are
(.SDATAZ と違い、文字列終わりの印はない) - JM
the number of bytes is truncated a multiple of 64
バイト数は64の倍数に切り捨てられる - コンピューター用語辞典
Physical size of the data, in bytes.
データの物理サイズをバイト数で示したもの。 - Python
(3148 cyl) (16 heads) (63 sectors/track) (512 bytes/sect) which is 1,624,670,208 bytes, or around 1.6 Gig.
(3148 シリンダ) (16 ヘッド) (63 セクタ/トラック) (512バイト/セクタ)これを計算すると 1,624,670,208 バイト、 つまり約 1.6 GB になります。 - FreeBSD
BYTES is hexadecimal with 0x or 0X prefix, it is multiplied by 512 with b suffix, by 1024 with k and by 1048576 with m.
"\\-w, \\-\\-width[=bytes]"出力ファイルの一行に表示する入力ファイルのバイト数を指定する。 - JM
The floor file name consists of a file name of these eight bytes and an extension of three bytes. これらの8バイトのファイル名と3バイトの拡張子から、フロアファイル名は構成される。 - 特許庁
Return a string of n random bytes suitable for cryptographic use.This function returns random bytes from an OS-specificrandomness source.
この関数は OS 固有の乱数発生源からランダムなバイト列を生成して返します。 - Python
Copyright (c) 2001 Robert Kiesling. Copyright (c) 2002, 2003 David Merrill. The contents of this document are licensed under the GNU Free Documentation License. Copyright (C) 1999 JM Project All rights reserved.
Copyright 2001-2004 Python Software Foundation.All rights reserved. Copyright 2000 BeOpen.com.All rights reserved. Copyright 1995-2000 Corporation for National Research Initiatives.All rights reserved. Copyright 1991-1995 Stichting Mathematisch Centrum.All rights reserved.