「Is Using」を含む例文一覧(50000)

<前へ 1 2 .... 65 66 67 68 69 70 71 72 73 .... 999 1000 次へ>
  • On range measurement, by using all frequency band high distance resolution is obtained.
    距離測定については、全周波数帯域を用いて高い距離分解能を得る。 - 特許庁
  • The center point of a transmitter is specified as a logic level by using the reference signal.
    基準信号を用いて送信機器の中心点を論理レベルとして特定する。 - 特許庁
  • An opaque conductive region 16 is composed of a conductive ink deposited by using screen-printing and is directly formed in an image-wise pattern by using screen-printing.
    不透明な導電領域16を、スクリーン印刷を用いて沈着される導電性のインクであるもとし、スクリーン印刷を用いて画像様のパターンに直接形成する。 - 特許庁
  • Namely, when the previous hot water supply is performed by water heater using operation, the hot water supply is performed by heating only city water by the water heater 22 without using the hot water stored in the hot water storage tank 20.
    即ち、前回の給湯が給湯器利用運転であったとき、貯湯槽20が貯湯する温水を利用せず、給湯器22で水道水のみを加熱して給湯する。 - 特許庁
  • The similarity is calculated using the image feature amount calculated by the device.
    その装置で計算された画像特徴量を使って、画像類似度を計算する。 - 特許庁
  • This detection is operated by binarizing the synthetic picture by using the number N as a threshold.
    この検知はNを閾値として合成画像を二値化することにより行われる。 - 特許庁
  • The DB 41 for search purpose is searched by using the second data as a key and similar bill data are extracted and the user using the false bill is specified from the extracted result.
    第2のデータをキーとして検索用DB41を検索して類似する紙幣データを抽出し、その結果から正券でない紙幣を使用した利用者を特定する。 - 特許庁
  • The electromagnetic effect produced by the keybars is calculated through simulation, using a computer.
    キーバーのよって生じる電磁効果は、コンピュータによってシミュレーション計算を行う。 - 特許庁
  • This body odor preventing and deodorizing agent is prepared by using dextrin as an active ingredient.
    デキストリンを有効成分として体臭予防及び消臭剤を調製する。 - 特許庁
  • A solid antenna is configured by using a base material(208) having orthogonal three faces.
    直交する三面をもつ母材(208)を利用して、立体アンテナを構成する。 - 特許庁
  • The client computer system is connected to a server computer system by using a network.
    クライアント・コンピュータ・システムはネットワークを利用してサーバ・コンピュータ・システムに接続される。 - 特許庁
  • This method for dyeing the textile fibers involves using fine powder which is obtained by pulverizing buckwheat chaff.
    そば殻を微粉砕して得たそば殻微粉末を用いて繊維を染色する。 - 特許庁
  • Also, image data of 1/(2^N) times the resolution is compressed using a second compression method.
    また1/(2^N)倍の解像度の画像データを第2圧縮方式で圧縮する。 - 特許庁
  • To provide a polarization dependent optical isolator using a reflection type polarizer, which is compact, has a high power resistance, and is easily assembled, and to provide a low cost laser diode module using the optical isolator.
    反射型偏光子を用いて、小型で耐パワー性が高く、アセンブリが容易な偏波依存型光アイソレータおよびそれを用いた低コストのレーザダイオードモジュールを提供する。 - 特許庁
  • The optical control molecular switch is characterized as using TLP1 and/or a mutant type TLP1.
    TLP1および/または変異型TLP1を用いることを特徴とする光制御分子スイッチ。 - 特許庁
  • Cast processing is executed at the time of execution by using RTTI data structure 216.
    RTTIデータ構造216を利用して、実行時に、キャスト処理を実行する。 - 特許庁
  • The heat transfer sheath 23 is formed by using a material superior in heat conductivity.
    伝熱シース23は、熱伝導性に優れた材料を用いて形成されている。 - 特許庁
  • This defect detection device is constituted by using the dark field illumination device.
    また、このような暗視野照明装置を用いて、欠陥検出装置を構成する。 - 特許庁
  • There is provided a method for cleaning a semiconductor wafer using the method for measuring the concentration.
    また、その濃度測定方法を用いた半導体ウェーハの洗浄方法である。 - 特許庁
  • A vegetable washing agent is sprayed from a front side of the Tatami mat using the Tatami facing formed by weaving imitation rush.
    そこで、畳を敷いたままの状態で洗浄する方法を提供する。 - 特許庁
  • The shell detonator is described as using electric, mechanical and optical devices.
    砲弾起爆装置は電気、機械及び光デバイスを用いるものとして記載される。 - 特許庁
  • This spacer is formed by sandwiching the reinforcing bar 4 by a long washer 3 by using a bolt 1 and a nut 2.
    ボルト1、ナット2を利用し、長ワッシャー3で鉄筋4を挟み、スペーサとする。 - 特許庁
  • The temperature of the silicon bar at the specific moment is measured by using the measured resistivity.
    求めた抵抗率を用いて、特定時点におけるシリコン棒の温度を求める。 - 特許庁
  • Steam is supplied to the steam engine 4 through a steam supply path 6, and the steam after using in the steam engine 4 is supplied to the device using steam through a steam dischrage path 7.
    蒸気エンジン4には、給蒸路6を介して蒸気が供給され、蒸気エンジン4にて使用後の蒸気は、排蒸路7を介して蒸気使用装置に供給される。 - 特許庁
  • In parallel, using the complete customer information, the direct mail is formed (S4).
    平行して不備がなかった顧客情報を用いてダイレクトメールを作成する(S4)。 - 特許庁
  • A patterning of the upper layer resist 5 is carried out, and the interlayer 4 is etched in a treatment chamber 11 by using the upper layer resist 5 as a mask and by using a gas containing fluorine.
    上層レジスト5がパターニングされ、その上層レジスト5をマスクとして、フッ素を含むガスを用いて処理チャンバー11内で中間層4がエッチングされる。 - 特許庁
  • Detection is performed by using IsaA released from Staphylococcus aureus as an index.
    黄色ブドウ球菌から放出されるIsaAを指標として検出を行う。 - 特許庁
  • Using the patterned photoresist layer as a mask, the cover layer 50 is etched off.
    パターンニングされたフォトレジスト層をマスクとして使用してカバー層をエッチング除去する。 - 特許庁
  • Then, the center of the backside of the semiconductor wafer 1 is ground by using a grinding stone.
    そして、半導体ウェハ1の裏面側の中央部を、砥石を用いて研削する。 - 特許庁
  • By this constitution, the resin varnish 2 is sufficiently stirred even in a case using the high viscosity resin varnish 2.
    これにより、高粘度の樹脂ワニス2を用いる場合でも、充分に攪拌される。 - 特許庁
  • PRESS FORMING METHOD FOR GRANULAR CARBON IN WHICH CARBON IS CAPTURED BY USING PULP FIBERS AS BINDER
    パルプ繊維を繋ぎ材として、加圧により粒状の炭を捕捉する成形方法。 - 特許庁
  • To provide manufacturing methods of a compound laser beam machine and a precision worked product by which a tool is manufactured by using a laser beam and a material to be cut is worked by using the same tool.
    レーザーを用いて工具を製作し、その工具を用いて被削材を加工できるレーザー複合加工機と精密加工製品の製造方法を提供する。 - 特許庁
  • Then a tip of a birds peak 2a is removed by using the photo resist pattern 21 for a mask.
    次に、フォトレジストパターン21をマスクとしてバーズビーク2aの先端部を除去する。 - 特許庁
  • The base layer B1 is then removed by using the first hard mask layer 5 as a mask.
    次に、第1のハードマスク層5をマスクとして用いて、下地層B1を除去する。 - 特許庁
  • Then, a data packet is transmitted by using the data slot arranged behind the communication slot.
    通知スロットの後に配置されたデータスロットを使用してデータパケットが伝送される。 - 特許庁
  • The output conversion part 4 is a DC voltage output part using the transformer for instance.
    出力変換部4は、例えばトランスを用いたDC電圧出力部である。 - 特許庁
  • A test process of software is evaluated by using a decided reliability growth model.
    そして、確定した信頼度成長モデルを用いてソフトウェアのテストプロセスを評価する。 - 特許庁
  • CARD BY WHICH CODE COMPOSITION IS POSSIBLE, CARD READER AND GAME PLAY DEVICE USING THE CARD
    コード合成可能なカード,カード読取装置および該カードを利用したゲームプレイ装置 - 特許庁
  • Next, the metal oxide layer 22 is polished using a CMP process while using a slurry, and the nitride layer 31 on the upper surface of the metal structure 21 is exposed.
    次に、スラリを用いて、金属酸化物層22が化学機械研磨(CMP)プロセスにより研磨され、金属構造21の上面上の窒化物層31が露出される。 - 特許庁
  • Information is sent to the illumination signboard display device by using a television signal.
    テレビジョン信号を使用して電飾看板表示装置Dに情報を送信する。 - 特許庁
  • The etching stop layer under the opening of the resist film is etched by using the resist film as a mask.
    レジスト膜をマスクとし、レジスト膜の開口下のエッチング停止層をエッチングする。 - 特許庁
  • A coating amount of priming particle emitting powder is controlled by using an electrostatic coating method.
    静電塗布法を用いて、プライミング粒子放出粉体の塗布量を制御する。 - 特許庁
  • A dialog is produced by modules using information transmitted in the controls.
    コントロール内で伝達される情報を利用して、モジュールによりダイアログを形成する。 - 特許庁
  • The generator 18 is fastened on the mounting surface 50 by using the both boss parts 51, 52.
    両ボス部51,52を利用して、ジェネレータカバー18を合わせ面50に締着する。 - 特許庁
  • Furthermore, for improving the operability, a spray-ionization method using a gas spray is used.
    さらに操作性向上のために、ガス噴霧を用いたスプレーイオン化法が用いられる。 - 特許庁
  • The intensity of the battery is evaluated by using the BBV, the load voltage, and battery temperature.
    該BBV、負荷電圧及びバッテリ温度を用いて、該バッテリの強度を評価する。 - 特許庁
  • While using the crystalline silicon film provided like this, a semiconductor device is produced.
    このようにして得た結晶性珪素膜を用いて半導体装置を作製する。 - 特許庁
  • In a color image output apparatus, an image is output using a color layer 30a and in a monochrome image output apparatus, an image is output using the monochrome layer 30b.
    カラー画像出力装置であれば、カラー・レイヤ30aを用いて画像出力し、モノクロ画像出力装置であれば、モノクロ・レイヤ30bを用いて画像出力する。 - 特許庁
  • By repeating these steps, the layout design of the cell using the robot by the user is executed.
    これを繰り返してユーザによるロボットを用いたセルのレイアウト設計がなされる。 - 特許庁
  • Water repellency is imparted at least to the component body 2 by using a water-repellent treating agent which is dissolved using a supercritical fluid such as a supercritical CO_2 fluid as a solvent.
    このとき、超臨界CO_2流体のような超臨界流体を溶媒として溶解した撥水処理剤を用いて、少なくとも部品本体2に撥水性を付与する。 - 特許庁
<前へ 1 2 .... 65 66 67 68 69 70 71 72 73 .... 999 1000 次へ>

例文データの著作権について

  • 特許庁
    Copyright © Japan Patent office. All Rights Reserved.