意味 | 例文 (83件) |
electrical curingとは 意味・読み方・使い方
追加できません
(登録数上限)
意味・対訳 電気養生
「electrical curing」の部分一致の例文検索結果
該当件数 : 83件
The method for producing the electrical instrument insulation material is provided by covering the instrument with the electrical insulation material and curing.例文帳に追加
前記の電気絶縁材料で被覆し、硬化する電気機器絶縁物の製造方法。 - 特許庁
(4) The curing agent 18c is made of a material having electrical conductivity.例文帳に追加
(4)硬化剤18cは導電性を有する材料からなる。 - 特許庁
The thermocompression step establishes at the same time the electrical and mechanical interconnection and the curing of the adhesives.例文帳に追加
熱圧縮ステップは、電気的および機械的相互接続と接着剤の硬化とを同時に確立する。 - 特許庁
EPOXY RESIN COMPOSITION FOR CASTING USE, METHOD FOR CURING THE SAME, AND ELECTRICAL/ELECTRONIC COMPONENT DEVICE例文帳に追加
注形用エポキシ樹脂組成物、その硬化方法及び電気・電子部品装置 - 特許庁
POST CURING RESIN COMPOSITION AND HIGH FREQUENCY ELECTRICAL INSULATING MATERIAL USING THE SAME例文帳に追加
後硬化性樹脂組成物及びそれを用いた高周波用電気絶縁材料 - 特許庁
To provide an electrical equipment insulating resin composition capable of significantly reducing volatile organic compounds (VOC) generated in an electrical insulating step and having a higher flash point than a curing temperature, excellent safety and such a high thermal conductivity that higher heat dissipation of electrical equipment can be expected, and to provide electrical equipment using the same.例文帳に追加
電気絶縁処理工程で発生するVOCを大幅に低減することができ、また、硬化温度よりも引火点が高く、安全性に優れ、更に、熱伝導率が高く、電気機器のより高い熱放散が期待出来る電気機器絶縁用樹脂組成物とこれを用いた電気機器を提供する。 - 特許庁
To provide a polyaniline which can be uniformly dispersed in a polyester resin and can obtain an electrically conductive composition having a low electrical resistance after curing.例文帳に追加
ポリエステル樹脂に均一に分散することができ、硬化後の電気抵抗が低い導電性組成物を得ることができるポリアニリンの提供。 - 特許庁
-
履歴機能過去に調べた
単語を確認! -
語彙力診断診断回数が
増える! -
マイ単語帳便利な
学習機能付き! -
マイ例文帳文章で
単語を理解!
「electrical curing」の部分一致の例文検索結果
該当件数 : 83件
The epoxy resin composition is poured and molded into windings/covered with an electrical insulating substance on a conductor followed by heat curing to obtain a mold coil.例文帳に追加
前記エポキシ樹脂組成物を電気絶縁物を導体に被覆した巻線に注型した後、加熱硬化してモールドコイルを得る。 - 特許庁
To provide a curing agent film excellent in low-temperature connectivity and connection reliability in electrical connection with a circuit substrate that has a line electrode.例文帳に追加
回線電極を有する回路基板間の電気的接続において、低温接続性及び接続信頼性に優れる硬化剤フィルムの提供。 - 特許庁
To provide conductive paste excelling in electrical conductivity and adhesion, while being capable of low-temperature curing at 60°C or below.例文帳に追加
60℃以下での低温硬化が可能でありながら、導電性や密着性に優れた導電性ペーストを提供する。 - 特許庁
After ending installation work, electrical characteristics of the solar cell module 100 can be checked with the curing sheet 8 being applied as it is.例文帳に追加
施工後に、養生シート8を取り付けたままで太陽電池モジュール100の電気的特性の確認を行うことができる。 - 特許庁
To obtain an impregnating resin composition having excellent drying properties and capable of holding conventional electrical, mechanical and curing characteristics in a well-balanced state.例文帳に追加
乾燥性に優れ、従来の電気的、機械的、硬化特性をもバランスよく保持した含浸用樹脂組成物を提供する。 - 特許庁
To obtain an epoxy resin composition with excellent thermal shock resistance and moisture resistance, useful for the electrical insulation coating of electrical/electronic parts by essentially including an epoxy resin, a curing agent and a filler and also including a thermal shock resistance improving material and a compatibilizing agent.例文帳に追加
電気・電子部品の絶縁被覆に適用するために、電気的特性及び他の特性を低下させることなく耐熱衝撃性の優れるエポキシ樹脂組成物を提供する。 - 特許庁
To provide an adhesive for electrical parts imparting a cured products with a proper flexibility at normal temperature and at a high temperature range after curing, excellent in adhesion of the electrical parts such as a semiconductor chip, etc., to a substrate, preventing generation of a large warpage on the electrical parts such as the semiconductor chip etc., adhered on the substrate.例文帳に追加
硬化後の硬化物が常温及び高温領域で適度な柔軟性を有するとともに、半導体チップ等の電気部品と基板との接着性に優れ、基板に接着した半導体チップ等の電気部品に大きな反りが発生することを防止できる電子部品用接着剤を提供する。 - 特許庁
This resin composition for electrical insulation contains as an essential ingredient (A) polyester resin; (B) phenol resin in which the content of residual formaldehyde is 0.5 wt.% or less as a curing component; (C) a curing accelerator; and (D) a diluent.例文帳に追加
本発明は、(A)ポリエステル樹脂、(B)硬化成分として、残留ホルムアルデヒド含有量が0.5重量%以下であるフェノール樹脂、(C)硬化促進剤および(D)希釈剤を必須成分としてなることを特徴とする電気絶縁用樹脂組成物である。 - 特許庁
意味 | 例文 (83件) |
ピン留めアイコンをクリックすると単語とその意味を画面の右側に残しておくことができます。 |
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |
-
1vapid
-
2believe
-
3iris
-
4sphery
-
5rendezvous
-
6while
-
7test
-
8consider
-
9appreciate
-
10present
「electrical curing」のお隣キーワード |
weblioのその他のサービス
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |