「SAFETY CATEGORY」に関連した英語例文の一覧と使い方 - Weblio英語例文検索

(v) the timing for amendment of the measures taken for the operational safety of Category 2 waste disposal in accordance with the attenuation of radioactivity, and 例文帳に追加

五　放射能の減衰に応じた第二種廃棄物埋設についての保安のために講ずべき措置の変更予定時期 - 日本法令外国語訳データベースシステム

(ii) A person who has passed the examination for the industrial safety consultant in the category of the civil engineering or building construction. 例文帳に追加

二　労働安全コンサルタント試験に合格した者で、その試験の区分が土木又は建築であるもの - 日本法令外国語訳データベースシステム

(a) Those with a safety coefficient (meaning a safety coefficient prescribed by paragraph (2) of Article 213-2 of the Crane Ordinance) equal to or above the number listed in i.) or ii.) below corresponding to the category of chain listed in i.) or ii.) below: 例文帳に追加

イ　安全係数（クレーン則第二百十三条の二第二項に規定する安全係数をいう。）の値が、次の（１）又は（２）に掲げるつりチェーンの区分に応じ、当該（１）又は（２）に掲げる値以上のものであること。 - 日本法令外国語訳データベースシステム

Article 51-16 (1) Any licensee of Category 1 waste disposal activity shall, pursuant to the provision of the Ordinance of METI, take necessary measures for operational safety concerning the following matters: 例文帳に追加

第五十一条の十六　第一種廃棄物埋設事業者は、次の事項について、経済産業省令で定めるところにより、保安のために必要な措置を講じなければならない。 - 日本法令外国語訳データベースシステム

To provide a vacuum high pressure packing device of which the high pressure capacity essentially needed at the time of high pressure pressurization impregnation is increased without satisfying the category of the second class pressure container (Occupational Safety and Health Regulation Section 1(vii)).例文帳に追加

第2種圧力容器（労働安全衛生施工令第１条第７号）の範疇に入ることなく、高圧加圧含浸時に本来必要な高圧加圧容積を大きくすることを可能とする、真空高圧充填装置を提供する。 - 特許庁

To provide a mat switch device in which in addition to a normal switch function, a failure state such as a contact short circuit and a contact failure of a plurality of lengthy switches can be detected rapidly, and which is high in safety category.例文帳に追加

本発明は、通常のスイッチ機能に加え、複数の長尺スイッチの接点短絡、接触不良等の故障状態を速かに検知でき安全カテゴリの高いマットスイッチ装置を提供するものである。 - 特許庁

(2) A person who has obtained the permission for the Category 2 waste disposal activity pursuant to the provision of Article 51-2 (1) (hereinafter referred to as "licensee of Category 2 waste disposal activity") shall establish the necessary measures for operational safety concerning the following matters, pursuant to the provision of the Ordinance of METI in accordance with the attenuation of radioactivity of nuclear fuel material or material contaminated with nuclear fuel material: 例文帳に追加

２　第五十一条の二第一項の規定による第二種廃棄物埋設の事業の許可を受けた者（以下「第二種廃棄物埋設事業者」という。）は、次の事項について、核燃料物質又は核燃料物質によつて汚染された物の放射能の減衰に応じて経済産業省令で定めるところにより、保安のために必要な措置を講じなければならない。 - 日本法令外国語訳データベースシステム

Article 147-3 Pursuant to the provisions of Article 60 of the Act, aircraft used for operations under Article 191-2 paragraph (1) shall be equipped with devices as listed for each category of operations under the relevant item. The devices shall be those required for flight safety purposes, as prescribed by the Minister of Land, Infrastructure, Transport and Tourism by public notice, and shall be equal to or greater than the quantities prescribed in the public notice. 例文帳に追加

第百四十七条の三　法第六十条の規定により、第百九十一条の二第一項各号に掲げる航行を行う航空機に装備しなければならない装置は、当該各号に掲げる航行の区分ごとに航空機の航行の安全を確保するために必要なものとして国土交通大臣が告示で定める装置であつて、告示で定める数量以上のものとする。 - 日本法令外国語訳データベースシステム

The registered groups are classified in five different categories, namely promotion of welfare, environmental preservation, promotion of community development, culture and the arts, and children's health and safety. Half of all groups registered are engaged in activities to promote welfare, one quarter are engaged in activities benefiting children (the Boy Scouts, Junior Sports Clubs, Kodomo-kai neighborhood associations for children's upbringing), and environmental preservation is the next most common category. 例文帳に追加

登録団体は福祉の増進、環境保全、まちづくりの推進、文化芸術、子供の健康と安全といった5 つの分野にわたり、登録数は半数が福祉の増進を図る活動、4 分の1 が子供の育成を目的とした団体（ボーイスカウト、スポーツ少年団、子ども会）、次に環境団体が多い。 - 経済産業省

The development of technical specifications (standards), etc., for each product category is assigned to the European Committee for Standardization. If a product complies with a standard43 defined by the European Committee for Standardization in accordance with the directive, the product is automatically deemed to have satisfied the safety requirements of the European Commission, and the free distribution of the product within the territory of EU member states is guaranteed.例文帳に追加

各製品分野における技術仕様（標準）等の策定は欧州標準化機関42に委任し、これらの標準化機関が指令に基づいて策定した標準43に合致していれば、当該製品は自動的に欧州委員会が要求する安全性の要件を満たしているとみなされ、欧州域内での自由な流通が保証される。 - 経済産業省

(iv) For the workplace regularly employing workers of number or more listed in the right column of the following table corresponding to categories of industry listed in the medium column of the same table, to appoint at least one as a fulltime safety officer among those appointed to supervise the technical matters concerning the safety among those works set forth in each item of paragraph (1) of Article 10 of the Act. However, in the case of industries falling under category 4 in the same table, this shall be limited only to a workplace in which there have been exceeding 100 cases which h compelled workers to be absent from their work for one day or more due to industrial accidents in the past three years. 例文帳に追加

四　次の表の中欄に掲げる業種に応じて、常時同表の下欄に掲げる数以上の労働者を使用する事業場にあつては、その事業場全体について法第十条第一項各号の業務のうち安全に係る技術的事項を管理する安全管理者のうち少なくとも一人を専任の安全管理者とすること。ただし、同表四の項の業種にあつては、過去三年間の労働災害による休業一日以上の死傷者数の合計が百人を超える事業場に限る。 - 日本法令外国語訳データベースシステム

At acquiring the kinds of input equipment and output equipment constituting the circuit, the operation specifications of control associated with the input equipment and output equipment and the safety category to be achieved, an MPU 13 performs access to each database according to acquired various conditions, and extracts the equipment matched with the conditions, and performs the arrangement and wiring of the extracted equipment according to the design rule to generate a safety circuit.例文帳に追加

回路を構成する入力機器及び出力機器の種類と、それら入力機器及び出力機器に関連づけた制御の動作仕様と、達成すべき安全カテゴリを取得すると、ＭＰＵ１３は、取得した各種の条件に従って各データベースをアクセスし、条件に合致する機器を抽出するとともに、抽出した機器を設計ルールに従って各機器の配置並びに配線を行い、安全回路を生成する。 - 特許庁

Article 5 (1) Any label placed, in accordance with the provisions of Article 7, Article 27 or Article 32-10 of the Old Consumer Products Safety Act, to those Specified Products set forth in Article 2, paragraph (2) of the Old Consumer Products Safety Act that fall under the category of Specified Products as described in Article 2, paragraph (2) of the New Consumer Products Safety Act (hereinafter referred to as "specified products under transition") at the time of the enforcement of Article 1 shall be deemed to be a label placed pursuant to the provisions of Article 13 of the New Consumer Products Safety Act until the expiration of a period specified by Cabinet Order for the respective specified products under transition not to exceed five years from the date of enforcement of Article 1. 例文帳に追加

第五条　第一条の規定の施行の際現に旧消費生活用製品安全法第二条第二項の特定製品であって新消費生活用製品安全法第二条第二項の特定製品であるもの（以下「移行特定製品」という。）に付されている旧消費生活用製品安全法第七条若しくは第二十七条又は第三十二条の十の規定による表示は、第一条の規定の施行の日から起算して移行特定製品ごとに五年を超えない範囲内において政令で定める期間を経過する日までの間は、新消費生活用製品安全法第十三条の規定により付された表示とみなす。 - 日本法令外国語訳データベースシステム

Article 51-6 (1) In the case where a person who has obtained the permission for conducting a waste disposal activity pursuant to the provision of Article 51-2 (1) (hereinafter referred to as "licensee of waste disposal activity") carries out waste disposal, he/she shall obtain the confirmation of the Minister of METI, as pursuant to the provision of the Ordinance of METI, to the compliance of his/her waste disposal facilities (excluding specified waste disposal facilities provided in paragraph (1) of the following Article for waste disposal facilities pertaining to the activity of Category 1 waste disposal) and the compliance of related measures for safety operation with the technical standard provided by the Ordinance of METI. 例文帳に追加

第五十一条の六　第五十一条の二第一項の規定による廃棄物埋設の事業の許可を受けた者（以下「廃棄物埋設事業者」という。）は、廃棄物埋設を行う場合においては、その廃棄物埋設施設（第一種廃棄物埋設の事業に係る廃棄物埋設施設にあつては、次条第一項に規定する特定廃棄物埋設施設を除く。）及びこれに関する保安のための措置が経済産業省令で定める技術上の基準に適合することについて、経済産業省令で定めるところにより、経済産業大臣の確認を受けなければならない。 - 日本法令外国語訳データベースシステム

Article 46 (1) A person who had, prior to the enforcement of Article 10, obtained or applied for approval with regard to Electrical Appliances and Materials as set forth in Article 2, paragraph (1) of the Old Electrical Appliance and Material Control Act which fall under the category of Electrical Appliances and Materials set forth in Article 2, paragraph (1) of the Electrical Appliance and Material Safety Act (hereinafter referred to as "Transferred Electrical Appliances and Materials"), pursuant to the provisions of Article 18 of the Old Electrical Appliance and Material Control Act (including a person who had applied for approval under paragraph (3) of the preceding Article); a person who has obtained or applied for approval under Article 23, paragraph (1) of the Old Electrical Appliance and Material Control Act (including a person who had applied for approval under paragraph (3) of the preceding Article); or a person who has obtained or applied for confirmation under Article 23-2, paragraph (1) of the Old Electrical Appliance and Material Control Act shall be deemed to have given notification under Article 3 of the Electrical Appliance and Material Safety Act with regard to Transferred Electrical Appliances and Materials for the product type pertaining to said approval, confirmation, or application. 例文帳に追加

第四十六条　第十条の規定の施行の際現に旧電気用品取締法第二条第一項の電気用品であって電気用品安全法第二条第一項の電気用品であるもの（以下「移行電気用品」という。）の型式について旧電気用品取締法第十八条の認可を受け若しくはその申請をしている者（前条第三項の認可の申請をしている者を含む。）、旧電気用品取締法第二十三条第一項の認可を受け若しくはその申請をしている者（前条第三項の認可の申請をしている者を含む。）又は旧電気用品取締法第二十三条の二第一項の確認を受け若しくはその申請をしている者は、当該認可若しくは確認又は申請に係る型式の移行電気用品について電気用品安全法第三条の規定による届出をしたものとみなす。 - 日本法令外国語訳データベースシステム

Article 47 (1) A person who had, prior to the enforcement of Article 10, obtained approval for the product type under Article 18 or Article 23, paragraph (1) of the Old Electrical Appliance and Material Control Act or who had obtained a confirmation of the product type under Article 18 or Article 23, paragraph (1) of the Old Electrical Appliance and Material Control Act with regard to Class-A Electrical Appliances and Materials as set forth in Article 2, paragraph (2) of the Old Electrical Appliance and Material Control Act, which falls under the category of Specified Electrical Appliances and Materials as set forth in Article 2, paragraph (2) of the Electrical Appliance and Material Safety Act (hereinafter referred to as "Transferred Specified Electrical Appliances and Materials") (including a person who has obtained approval or confirmation under the provisions of Article 45, paragraph (1) or paragraph (3) of the Supplementary Provisions for which the provisions then in force are to remain applicable pursuant to said provisions) shall be deemed to have performed the obligation under Article 9, paragraph (1) of the Electrical Appliance and Material Safety Act during the period between the day when he/she obtained or was deemed to have obtained said approval or confirmation and the day when the period specified by Cabinet Order set forth in Article 24, paragraph (1) of the Old Electrical Appliance and Material Control Act, in the case where he/she manufactured or imported Specified Electrical Appliances and Materials with a product type pertaining to said approval or confirmation. 例文帳に追加

第四十七条　第十条の規定の施行の際現に旧電気用品取締法第二条第二項の甲種電気用品であって電気用品安全法第二条第二項の特定電気用品であるもの（以下「移行特定電気用品」という。）について旧電気用品取締法第十八条若しくは第二十三条第一項の型式の認可を受けている者又は旧電気用品取締法第二十三条の二第一項の型式の確認を受けている者（附則第四十五条第一項又は第三項の規定によりなお従前の例によることとされたこれらの規定による型式の認可若しくは確認を受けた者を含む。）は、その認可若しくは確認に係る型式の移行特定電気用品を製造し、又は輸入した場合には、当該認可を受けた日若しくは当該確認を受けて認可を受けたものとみなされた日から旧電気用品取締法第二十四条第一項の政令で定める期間を経過する日までの間は、電気用品安全法第九条第一項の規定による義務を履行したものとみなす。 - 日本法令外国語訳データベースシステム

Article 49 With regard to Transferred Specified Electrical Appliances and Materials pertaining to a product type for which approval under Article 18 or Article 23, paragraph (1) of the Old Electrical Appliance and Material Control Act or confirmation under Article 23-2, paragraph (1) of the Old Electrical Appliance and Material Control Act had been obtained at the time of enforcement of Article 10, or with regard to Class-B Electrical Appliances and Materials as set forth in Article 2, paragraph (2) of the Old Electrical Appliance and Material Control Act with structures pertaining to a notification under Article 26-2, paragraph (1) or Article 26-3, paragraph (1) of the Old Electrical Appliance and Material Control Act which fall into the category of Electrical Appliances and Materials set forth in Article 2, paragraph (1) of the Electrical Appliance and Material Safety Act, labeling under Article 25, paragraph (1) or Article 26-6, paragraph (1) may be affixed during the one year from the day of enforcement of Article 10 (with regard to those specified by Cabinet Order as Transferred Electrical Appliances and Materials that require a considerable period of time for the repair or alteration of manufacturing equipment accompanied with the change of labeling, the period specified by Cabinet Order for the relevant Transferred Electrical Appliances and Materials within a limit not exceeding three years from the day of the enforcement of Article 10), notwithstanding the provisions of Article 10, paragraph (2) of the Electrical Appliance and Material Safety Act. 例文帳に追加

第四十九条　第十条の規定の施行の際現に旧電気用品取締法第十八条若しくは第二十三条第一項の認可若しくは旧電気用品取締法第二十三条の二第一項の確認を受けている型式に係る移行特定電気用品又は旧電気用品取締法第二十六条の二第一項若しくは第二十六条の三第一項の規定による届出に係る構造の旧電気用品取締法第二条第二項の乙種電気用品であって電気用品安全法第二条第一項の電気用品であるものについては、電気用品安全法第十条第二項の規定にかかわらず、第十条の規定の施行の日から起算して一年間（表示の変更に伴う製造設備の修理又は改造に相当の期間を要する移行電気用品として政令で定めるものにあっては、第十条の規定の施行の日から起算して三年を超えない範囲内において移行電気用品ごとに政令で定める期間）は、旧電気用品取締法第二十五条第一項又は第二十六条の六第一項の規定の例による表示を付することができる。 - 日本法令外国語訳データベースシステム