意味 | 例文 (722件) |
みついけ2ちょうめの英語
追加できません
(登録数上限)
「みついけ2ちょうめ」の部分一致の例文検索結果
該当件数 : 722件
第1 章、第2 章でみてきたとおり、世界経済が構造的に変化する中で、世界経済成長の中心がアジアはじめ新興国に移行しつつある。例文帳に追加
As seen in Chapter1 and 2, the centre of the world economic growth is shifting to Asia and emerging countries through changes in world economic structure. - 経済産業省
網目9が縦に長い長方形のため、魚2は通過しやすい形状である。例文帳に追加
The net has longitudinally elongated rectangular meshes 9 to facilitate the passage of fish 2. - 特許庁
梅渓季通(うめたにすえみち、慶長20年3月29日(旧暦)(1615年4月26日)-万治元年2月2日(旧暦)(1658年3月5日))は、江戸時代前期の公卿。例文帳に追加
Suemichi UMETANI (April 26, 1615 - March 5, 1658) was a kugyo (court noble) during the first half of the Edo period.発音を聞く - Wikipedia日英京都関連文書対訳コーパス
上記揚げ菓子生地の成形は、吐出口面積が130mm^2以上で且つ吐出口外周長(mm)/吐出口面積(mm^2)が0.5〜0.75であるノズルを用いて連続的に押出すことにより行うことができる。例文帳に追加
The fried cake dough is molded by continuously extruding the dough by using such a nozzle that the outlet area is at least 130 mm^2 and that the ratio of the outlet outer peripheral length (mm) to the outlet area (mm^2) is 0.5-0.75. - 特許庁
1.国王の恵みの雨:干ばつの解決 2.森林:水の復元 3.ダムの調査:遊水 4.ベチベル草:地滑りの防止5.貯水池:丘での水の復元例文帳に追加
1. Royal Rain/Drought solution 2. Forest/Water restoration 3. Dam survey/water retarding 4. Vetiver grass/landslide prevention 5. Reservoir/water restoration at hill base - 経済産業省
日本生命初代社長鴻池善右衛門に続き、1903年より1919年までの17年に渡り2代目社長を務めた。例文帳に追加
Naoharu became the second president of Nippon Life Insurance, succeeding Zenemon KONOIKE, the first president of the company.発音を聞く - Wikipedia日英京都関連文書対訳コーパス
厚生労働大臣は、1(1)及び2の意見を述べるときその他必要があると認めるときは、研究機関の長に対し、1(2)に規定する書類以外の資料の提出を求めるとともに、当該研究機関の長の承諾を得て、当該研究機関の調査その他の必要な調査を行うことができる。例文帳に追加
When issuing opinions as set forth in 1(1) and 2, the Minister of Health, Labor and Welfare may, as deemed necessary, request documents other than those set forth in 1(2), and, with the acknowledgment of the institute director, conduct a review of the research institution, or other such reviews as necessary. - 厚生労働省
-
履歴機能過去に調べた
単語を確認! -
語彙力診断診断回数が
増える! -
マイ単語帳便利な
学習機能付き! -
マイ例文帳文章で
単語を理解!
「みついけ2ちょうめ」の部分一致の例文検索結果
該当件数 : 722件
集電体が銅合金からなり、その引張強さが400N/mm^2以上、比例限界が160N/mm^2以上、弾性係数が1.1N/mm^2以上であり、活物質薄膜が形成されている集電体の面の表面粗さRaが0.01〜1μmであることを特徴としている。例文帳に追加
It is featured in that the current collector comprises a copper alloy and has tensile strength of 400 N/mm^2 or more, proportional limit of 160 N/mm^2 or less, elastic coefficient of 1.1 N/mm^2 or more, and surface roughness Ra of 0.01-1 μm for a face of the current collector forming the active material thin film. - 特許庁
表面硬度が150N/mm^2以上320N/mm^2以下の硬化性組成物の硬化皮膜が表面に形成された、鉛筆硬度7H以上であることを特徴とする表面処理アルミニウム成型品。例文帳に追加
In the surface-treated aluminum molding, a cured membrane of the curable composition having a surface hardness of 150-320 N/mm^2 or below is formed on the surface, and pencil hardness is 7H or higher. - 特許庁
しかしながら、貿易の絶対額をみると、被災5 県からの2010 年の貿易額は輸出が約1 兆3,800 億円、輸入が約2 兆4,300 億円であり、我が国全体に占める割合は輸出で約2%、輸入で約4%にとどまる。例文帳に追加
However, from the point of absolute amount of the trade, the trade value of 2010 from 5 disaster-affected prefectures were in export approximately 1,380 billion yen, and in import approximately 2,430 billion yen. The percentage in entire Japan value, remain at the level of approximately 2% in export and approximately 4% in import. - 経済産業省
凹凸のある樹脂部材2の表面を、透明なエポキシ樹脂1で埋包したことを特徴とする水回り用樹脂成形体、また、前記水回り用樹脂成形体が板状であることを特徴とする水回り用樹脂成形体。例文帳に追加
Provided is a resin-molded article for water furnishings characterized in that the surface of the uneven resin member 2 is enveloped in the transparent epoxy resin 1 and the molded body is of a plate. - 特許庁
ペレットの切断面における表面積(以下「断面積」とする。)の平均値が3.0mm^2〜6.5mm^2でありかつその標準偏差が0.65mm^2以下であることを特徴とするポリカーボネート樹脂より成る光学用ポリカーボネート樹脂成形材料。例文帳に追加
This optical polycarbonate resin molding material comprises a polycarbonate resin characterized in that the average value of surface areas at the cut sections of pellets (referred to as sectional areas hereafter) is 3.0 to 6.5 mm^2 with a standard deviation of 0.65 mm^2 or less. - 特許庁
張力付与性絶縁皮膜の形成に先立ち、二次再結晶済みの一方向性珪素鋼板に対し、鋼板片面当たり0.1g/m^2以上10g/m^2以下のリン酸亜鉛を主体とする皮膜を形成させる。例文帳に追加
In this manufacturing method, before depositing a tension impartable insulation film, a film mainly consisting of zinc phosphate of ≥ 0.1 g/m^2 and ≤ 10 g/m^2 per one side of the steel sheet is deposited on the grain-oriented silicon steel plate subjected to the secondary re-crystallization. - 特許庁
ワイヤ芯線は、縦弾性係数220kN/mm^2以上、伸び1.5%以上の弾性歪み特性をもつ超高弾性合金で構成してある。例文帳に追加
The core wire is constituted of a super high elasticity alloy with the elastic distortion characteristics that Young's modulus in a longitudinal direction is ≥220kN/mm^2 and elongation is ≥1.5%. - 特許庁
上型1,下型2にそれぞれ成形面1a,成形面2aが形成され、光学素子形状に超精密加工されている。例文帳に追加
A figuration of the optical element is precisely made by forming a molding surface 1a and a molding surface 2a in an upper die 1 and a lower die 2 respectively. - 特許庁
|
意味 | 例文 (722件) |
ピン留めアイコンをクリックすると単語とその意味を画面の右側に残しておくことができます。 |
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |
「みついけ2ちょうめ」のお隣キーワード |
weblioのその他のサービス
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |