| 例文 |
j testの部分一致の例文一覧と使い方
該当件数 : 17件
The test condition changing means 16 sets a correction testing condition which is different from a j-th inspection condition, j=j+1, when the comparison result outputted from the characteristics comparing means 15 does not agree, and the correction test conditions is newly set as the j-th test condition this is outputted to the testing means 12, and testing is executed again.例文帳に追加
検査条件変更手段16は、特徴比較手段15から出力される比較結果が不一致の場合に、第j検査条件と異なる修正検査条件を設定してj=j+1とし、この修正検査条件を新たな第j検査条件として検査手段12に出力し、再検査が実施される。 - 特許庁
The flare amount of a test pattern (Σ(K(i, j)×X (x+i, y+j))) is stored beforehand, and the input image Y (x, y) is corrected by Y(x, y)/(1+flare amount).例文帳に追加
テストパターンのフレア量(Σ(K(i,j)×X(x+i,y+j)))を予め記憶しておき、入力画像Y(x,y)を、Y(x,y)/(1+フレア量)により補正する。 - 特許庁
The respective modules 10 have shift scan circuits by connecting the flip-flop circuits 11-1 to 11-j in a chain shape at test mode time.例文帳に追加
各モジュールは、テストモード時に該フリップフロップ回路がチェイン状に結線されてなるシフトスキャン回路を備える。 - 特許庁
The terminal (i) obtains the encryption key Ka_j and the terminal (j) obtains the authentication test information Dc_i by similar procedures.例文帳に追加
同様の手順により、端末iは暗号キーKa_jを、端末jは認証試験情報Dc_iを得る。 - 特許庁
The spheroidal graphite cast iron has ≥650 MPa tensile strength and ≥10% elongation and also has ≥10 J/cm^2 impact value by the Charpy impact test (U-notch) at -40°C test temperature.例文帳に追加
引張強さが650MPa以上、伸びが10%以上で、また、試験温度が−40℃におけるUノッチシャルピー衝撃試験による衝撃値が10J/cm^2以上の球状黒鉛鋳鉄である。 - 特許庁
The terminal (i) encrypts authentication answer information Dr_i generated from the authentication test information Dc_j using the encryption key Ka_j and transmits the information to the terminal (j).例文帳に追加
端末iは、認証試験情報Dc_jから生成した認証回答情報Dr_iを暗号キーKa_jで暗号化して端末jに送信する。 - 特許庁
The terminal (j) extracts the authentication test information Dc_j by decrypting it using the decryption key KA_j and performs authentication according to whether the extracted information is the same as information generated by itself.例文帳に追加
端末jは、解読キーKA_jにより復号して認証試験情報Dc_jを取り出し、自身が生成したものと同一であるか否かにより認証を行う。 - 特許庁
Each of the (i-1) pieces of elements are test driven which are from the j-th row to the (j+1-1)th row of the k-th column, among the m×n pieces of the electron emission element (hereinafter called the element), during the blanking period of input video signals, and measuring the emission current Ie of these elements.例文帳に追加
入力映像信号のブランキング期間に、m×n個の電子放出素子(以下、素子と称する)のうち、k列目のj行目から(j+i−1)行目までの(i−1)個の各素子をテスト用に駆動し、それらの素子の放出電流Ieを測定する。 - 特許庁
In a test response pattern 104, when the logical value of a bit position (i) is 0, it is replaced with a logical variable di, and when the logical value of a bit position (j) is 1, it is replaced with a logical variable/dj.例文帳に追加
テスト応答パターン104において、ビット位置iの論理値が0であれば論理変数diで置換し、ビット位置jの論理値が1であれば論理変数/djで置換する。 - 特許庁
After the permeability test of a ground 39 is performed to acquire a head diffusion coefficient 63 between observation points, the constellation 41 of observation points A, B to J is determined by using the inverse of the head diffusion coefficient 63 as similarity in a multi-dimensional scaling method.例文帳に追加
地盤39の透水試験を行って観測点間の水頭拡散率63を取得した後、水頭拡散率63の逆数を多次元尺度構成法における類似度として用いて、観測点A、B、…、Jの布置41を求める。 - 特許庁
The film containing the acrylic resin having the ring structure in the principal chain is biaxially stretched to bring an in-plane phase difference Re and a thickness-directional phase difference into 10 nm or less, to bring a film impact strength into ≥0.2 J and to bring a folding endurance test frequency into ≥200 times.例文帳に追加
主鎖に環構造を有するアクリル樹脂を含むフィルムを二軸延伸することで、面内位相差Reと厚さ方向位相差が10nm以下、フィルムインパクト強度が0.2J以上、耐折度試験回数が200回以上とする。 - 特許庁
The styrene resin sheet can be provided with the 10 J/cm or more overall absorption energy at 23°C temperature measured by the Polymer Material Center Standard 'Instrumentation Multihead Impact Test Method for Solid Plastic' and approximately the 0.3-20% haze value on the 180 μm thickness measured based on the JIS K-7105.例文帳に追加
スチレン系樹脂シートは、高分子素材センター規格「硬質プラスチックの計装化多軸衝撃試験法」に準拠して測定した全吸収エネルギーが温度23℃において10J/cm以上、JIS K 7105に準拠して測定したヘーズ値が、厚み180μmにおいて0.3〜20%程度であってもよい。 - 特許庁
To provide a metal powder-filled welding wire in which filled flux is made of metal powder and/or alloy powder and which enables weld metal to have an absorbed energy at 0°C of 70 J or higher in 2 mm V notch Charpy impact test, in non-consumable nozzle type electroslag welding.例文帳に追加
非消耗ノズル式エレクトロスラグ溶接において、溶接金属の2mmVノッチシャルピー衝撃試験の0℃における吸収エネルギーが70J以上となる、充填フラックスが金属粉および/または合金粉からなるメタル粉入り溶接ワイヤを得ることを課題とする。 - 特許庁
In the method for preventing the peeling of concrete, to the surface of concrete, a high strength coating film in which energy required for fracture is ≥1 J in a push-out test for concrete with a diameter of 100 mm in an environment at the temperature of 20°C and the humidity of 65% is formed.例文帳に追加
コンクリート表面に対して、温度20℃、湿度65%の環境下での直径100mmのコンクリート押し抜き試験において、破断に要するエネルギーが1J以上である高強度塗膜を形成することを特徴とするコンクリート剥落防止方法である。 - 特許庁
The device 101 for the jitter test includes a jitter amount detecting part 13, which detects a jitter amount of an input signal S and an operation part 14 which computes the characteristic of the jitter amount J detected by the jitter amount detecting part 13, at start time that is different in a prescribed time T_S so that time domains of computation may overlap each other.例文帳に追加
本願発明のジッタ試験装置101は、入力信号Sのジッタ量を検出するジッタ量検出部13と、ジッタ量検出部13で検出されたジッタ量Jの特性を、演算する時間領域が重なるように所定時間T_Sずつ異なる開始時刻で演算する演算部14と、を備える。 - 特許庁
The tableware integrally formed of a ceramic layer and a resin layer formed on its outer face is such a hybrid tableware that has (1) a thickness of the resin layer in a range of 20-150% of the whole thickness of a molded body made of the pottery and has (2) a value in a chipping test measured according to ASTM C368-77 of at least 0.8 J.例文帳に追加
セラミックス層とその外面に形成された樹脂層が一体となって形成された食器であって、(1)樹脂層の厚さが、陶磁器製成形体の厚さの20〜150%の範囲で形成されており、(2)ASTM C368−77に従って測定したチッピング試験における値が0.8J以上であるハイブリッド食器。 - 特許庁
| 例文 |
| Copyright © Japan Patent office. All Rights Reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|