C mAとは 意味・読み方・使い方

The electrolyte solution 14 has a reaction current of ≤0.1 mA/F in a stable state when a voltage of 3.3 V is applied thereto at 70°C.例文帳に追加

電解液１４は、７０℃における３．３Ｖの電圧印加時の安定時反応電流が０．１ｍＡ／Ｆ以下である。 - 特許庁

For example, after a current of 108 mA is passed for 15 msec so as to make the surface temperature of the thermal head rise to 100°C, the current is decreased from 100 mA to 88 mA with a lapse of 35 msec, and the passage of the current is stopped 50 msec after the initiation of the passing of the current.例文帳に追加

例えば、サーマルヘッドの表面温度を１００℃に昇温するために１０８ｍＡの電流を１５ｍｓｅｃ通電し、その後３５ｍｓｅｃの時間をかけて電流を１００ｍＡから８８ｍＡに減少させ、通電を開始から５０ｍｓｅｃ後に停止する。 - 特許庁

After the battery 1 is heated up to 600°C, the generated current (specified quantity of current of 20 mA to 50 mA) is repeatedly drawn out from the battery 1, the temperature of the battery 1 is made increased by utilizing self-exotherm up to the regular power generation temperature.例文帳に追加

電池１を６００℃まで加熱した後、電池１から発電電流（２０ｍＡ〜５０ｍＡの規定量の電流）を繰り返し引き出し、自己発熱を利用して定常発電温度まで上昇させる。 - 特許庁

To provide an ion implantation apparatus which can avoid discharge tracks on the rear surface of a silicon wafer which has been generated, when ion implantation is carried out over the wafer at a temperature exceeding 300°C with use of a 10 mA-100 mA region ion implantation apparatus.例文帳に追加

１０ｍＡから１００ｍＡ領域のイオン打込み装置を使い３００℃を越える温度でシリコンウエハにイオン打込みを行うときに発生していたウエハ裏面放電痕のないイオン打込み装置を提供する。 - 特許庁

When the temperature Tc at which the power amplifier is usually used is 25°C for example, and if the drain bias current Id at which the linearity property of the gain (Gain) of the amplifier becomes the highest at Tc= 25°C is set to 10 mA, the linearity deteriorates sharply if the temperature Tc changes to -20°C.例文帳に追加

例えば、通常使用する温度がＴｃ＝２５℃である場合、その時に利得Gainの線形特性が最も高いドレインバイアス電流をＩｄ＝１０ｍＡに設定すると、温度がＴｃ＝—２０℃に変化すると当該線形性が大幅に劣化してしまう。 - 特許庁

During the electrifying treatment, the temperature of the mixture containing wheat flour and water is maintained preferably at 5-30°C, and the electrification is carried out under a constant current condition of 10-70 mA.例文帳に追加

通電処理中、小麦粉及び水を含む混合物の温度を５〜３０℃の範囲に維持することが望ましく、また、定電流条件を１０〜７０ｍＡの範囲にする。 - 特許庁

The conditions of the electrolysis are preferably conditions in which temperature is 50 to 60°C, current density is 1 to 100 mA/cm^2 on the anode and an oxidation-reduction potential is 600 to 1,200 mV on the anode.例文帳に追加

電解条件は、温度５０〜６０℃、陽極の電流密度１〜１００ｍＡ／ｃｍ^２、陽極の酸化還元電位６００〜１２００ｍＶの条件が好ましい。 - 特許庁

Also, the conductive elastomer member may have a thickness of 0.1 to 2.0 mm, and also exhibit a temperature rise of 7°C or less under conditions of a voltage of 12 to 15 V and an electric current of 200 mA.例文帳に追加

また、前記導電性エラストマ部材が、厚さ０．１〜２．０ｍｍで、電圧１２〜１５Ｖ、電流２００ｍＡの条件下で、その温度上昇が７℃以下であるものでもよい。 - 特許庁