| 例文 |
set heightの部分一致の例文一覧と使い方
該当件数 : 1680件
height [ -w | -d ] [ lines " [" cols ]] Set the display height to a specified number of lines. 例文帳に追加
height[ -w | -d ][ lines " [" cols ]]ディスプレイの高さを指定された行数に設定する。 - JM
The width and height members are set to the size(extent) of the rectangle. 例文帳に追加
width, height メンバには、長方形のサイズ(広さ)が設定される。 - XFree86
The width and height members are set to the size (extent) of the rectangle.例文帳に追加
width, height メンバには長方形の大きさ(広さ)が設定される。 - XFree86
For example, the pipe height is set to be 6-10 mm, and the fin height is set to be 3-6 mm.例文帳に追加
たとえば、管高さを6〜10mmとし、フィン高さを3〜6mmとする。 - 特許庁
Then, the pockets 10 are automatically re-set to a set height by a re-set part 5.例文帳に追加
その後、ポケット10は再セット部5で自動的にセット高さに再セットされる。 - 特許庁
The height position of a projection 3 upper part is set to a height position exceeding 80% of the groove height and 70-95% of the gasket height, and a height position of a projection 3 lower part is set to a height position of 40% or more of the gasket height.例文帳に追加
突起3上部の高さ位置は溝高さの80%を超えかつガスケット高さの70%以上95%以下の高さ位置とし、かつ突起3下部の高さ位置はガスケット高さの40%以上の高さ位置とする。 - 特許庁
Worksheet::setRow--This method is used to set the height and XF format for a row. 例文帳に追加
Worksheet::setRow--行の高さおよび書式を設定する - PEAR
Tube height Ht of the tubes 4 is set at 3-4 mm, and fin height Hf of the corrugate fins 5 is set at 7-9 mm.例文帳に追加
チューブ4のチューブ高さHtを3〜4mmとし、コルゲートフィン5のフィン高さHfを7〜9mmとする。 - 特許庁
The width and height members are set to the inside size of the window, not including the border.例文帳に追加
width, height メンバには境界を含まないウィンドウの内側の大きさが設定される。 - XFree86
The height of the bank is set lower than the height of the circuit components 41, 42 and 43.例文帳に追加
堤部の高さは回路素子41,42,43の高さより低く設定されている。 - 特許庁
The average height of a group of plants is set lower than an average height of the solar cell.例文帳に追加
植物群の平均高さを太陽電池の平均高さより低く設定する。 - 特許庁
The reinforcing rib 10 has its width set at 3.0 mm and its height at 1.5 mm.例文帳に追加
補強用リブ10の幅を3.0mm 、高さを1.5mm に設定する。 - 特許庁
The height of the brush bristles 31 of the brush part 30A is set higher than the height of the comb teeth 33.例文帳に追加
ブラシ部30Aのブラシ毛31の高さを櫛歯33の高さよりも高くする。 - 特許庁
The height of the internal wall is set to be 2 to 30% of the height of the content liquid filling chamber of the container.例文帳に追加
内壁の高さは容器の内容液充填室の高さの2〜30%である。 - 特許庁
The height of the cylinder body 3 is preferably set lower than the height of a peripheral wall part 2b of the box body 2.例文帳に追加
筒体3の高さは、箱体2の周壁部2bの高さよりも低くするとよい。 - 特許庁
Height Ha of the intermediate member 25 is set in height for supplementing the difference between height of the sum of height Hb of a unit case body 6 and height Hc of the unit case supporting flange 5, and height Ht of the tank.例文帳に追加
中間部材25の高さHaは、ユニットケース本体6の高さHbとユニットケース支持フランジ5の高さHcの合計の高さと、タンクの高さHtとの差を補う高さに設定する。 - 特許庁
An image reduction coefficient is set on the basis of the calculated minimum width and height and the maximum width and height.例文帳に追加
算出した、最小の幅、高さ、最大の幅、高さから画像縮小係数を設定する。 - 特許庁
The height of the kitchen 2 is set to be lower than the position of the viewing line of a resident of general height.例文帳に追加
キッチン2の高さは一般的な背丈の居住者の目線位置よりも低く設定される。 - 特許庁
The height of the metallic case 10 is set corresponding to the height of the other electronic parts 26, 28, and 30.例文帳に追加
金属ケース10の高さは、他の電子部品26,28,30の高さに対応した高さとする。 - 特許庁
In the system, the average height of solar cell modules is set higher than the average height of the group of plants.例文帳に追加
太陽電池モジュールの平均高さを植物群の平均高さより高く設定する。 - 特許庁
The window member is set to the window whose size another client attempted to change. The width and height members are set to the inside size of the window,excluding the border.例文帳に追加
window メンバには、他のクライアントがサイズを変えようとしたウィンドウが設定される。 - XFree86
Height of the protrusion is preferably set at 0.03 μm or above.例文帳に追加
突起の高さは0.03μm以上とすることが望ましい。 - 特許庁
The height of the small protruding piece 3 is set between 0.1 and 1.0 mm.例文帳に追加
小突出子3の高さを、 0.1mm以上 1.0mm以下に設定する。 - 特許庁
To easily set the mounting height of a sleeper with high accuracy.例文帳に追加
大引きの取付高さを簡易かつ高精度に設定すること。 - 特許庁
In the Style Editor for the Layout Panel, set the height to 175px and width to 760px. 例文帳に追加
レイアウトパネルのスタイルエディタで、高さを 175px、幅を 760px に設定します。 - NetBeans
The height H of the inclined fin 3 is set to be 0.05-0.30 mm, and a ratio h/H of the height h of the auxiliary fin 30 and the height H of the inclined fin 3 is set to be 0.1-0.9.例文帳に追加
傾斜フィン3の高さHが0.05乃至0.30mm、補助フィン30の高さhと傾斜フィン3の高さHの比h/Hが0.1乃至0.9である。 - 特許庁
To provide a forklift safely stopping a fork at the lifting height not higher than a set limited lifting height when the set limited lifting height is set and the fork is raised without setting a reference point.例文帳に追加
設定制限揚高を設定し、基準点を設定せずに上昇した時にフォークを設定制限揚高以下の揚高に安全に停止させるフォークリフトを提供することを目的とする。 - 特許庁
Or the unit height is set to be lower than the actual height and also a locating range is limited.例文帳に追加
または、車載器高さを実際の車載器高さよりも低く設定し、且つ、標定範囲を制限する。 - 特許庁
The height of a tooth root of the cushion gears 9a and 9b is set longer than the height of a tooth root of the main gear.例文帳に追加
クッションギヤ9a,9bの歯元のたけを主歯車の歯元のたけよりも長く設定する。 - 特許庁
The height position of the toner bottle storage part 8T is set, for example, as the average height position of the elbows E of Japanese women F.例文帳に追加
その高さ位置は、例えば日本人女性Fの肘Eまでの高さの平均位置と設定する。 - 特許庁
The thrust height of the lifter 80 is set to two stages in advance, and the thrust height is selectively set when packaging the commodity M.例文帳に追加
リフタ80の押し上げ高さは予め2以上設定され、商品Mの包装時に押し上げ高さが選択的に設定される。 - 特許庁
To easily set the height data of a workpiece to sewing pattern data.例文帳に追加
縫製パターンデータに被縫製物の高さデータを容易に設定する。 - 特許庁
During oil control when oil temperature is low, the height dimension of the overflow tube 6 is set short to set the oil-level height low.例文帳に追加
オイル温度が低い場合の油量調整時にはオーバフローチューブ6の高さ寸法を短くして油面高さを低く設定する。 - 特許庁
During oil control when oil temperature is high, the height dimension of the overflow tube 6 is set long to set the oil-level height high.例文帳に追加
オイル温度が高い場合の油量調整時にはオーバフローチューブ6の高さ寸法を長くして油面高さを高く設定する。 - 特許庁
The contact height before crimping is set larger than the target value.例文帳に追加
かしめ前の接点高さを前記目標値よりも大きい値とする。 - 特許庁
The four protrusions in one set are the same in height, and regarding the plurality of sets, the protrusions are different in height for each set.例文帳に追加
前記4個1組の凸部は1組の高さ寸法が4つとも同じであり、前記複数組みの凸部は組毎に高さが異なる。 - 特許庁
The height H1 of the heel part 21 is set to be less than 11 mm.例文帳に追加
ヒール部21の高さH1が11mm未満になっている。 - 特許庁
The height of the spiral is set to a prescribed value, and the outside diameter of the bowl part is set to a prescribed value, according to the height of the cylindrical body.例文帳に追加
また、前記筒体の高さに応じて、スパイラルの高さが所定に設定されると共にボウル部の外径が所定に設定される。 - 特許庁
Namely, when a threshold of the height of the rectangular region is set to (n) and a threshold of the width is set to (m), (m) > (n).例文帳に追加
すなわち、矩形領域の高さの閾値をn、幅の閾値をmとして、m>nである。 - 特許庁
If you need to set a specific height or width for the component, set the block property to true. 例文帳に追加
コンポーネントの高さまたは幅を設定する必要がある場合は、「block」プロパティーを True に設定します。 - NetBeans
The height of the foot cabinet 8 is independent from the attachment height of the counter and is set lower than the attachment height of the counter 4.例文帳に追加
足元キャビネット8の高さは前記カウンター4の取り付け高さに依存せずに、前記カウンター4の取り付け高さよりも低く設定されている。 - 特許庁
DESK WHOSE HEIGHT IS ADJUSTED BY LEG SET WITH DIFFERENT HEIGHT AND WHICH CAN BE DISASSEMBLED AND STORED, AND ASSEMBLY CHAIR WHOSE HEIGHT IS ADJUSTED WITH SEAT CUSHION例文帳に追加
机の高さを高さの異なる脚セットで調節する分解収納可能な机と椅子の高さを座布団で調節する組み立て椅子。 - 特許庁
The height difference between the height (Hf_1) of the highest first fin 4 and the height (Hf_2) of the lowest second fin 5 is set to 0.02 mm or less.例文帳に追加
最も高い第1フィン4の高さ(Hf_1)と最も低い第2フィン5の高さ(Hf_2)との高低差は、0.02mm以下に設定する。 - 特許庁
| 例文 |
JESC: Japanese-English Subtitle Corpus映画・海外ドラマ英語字幕翻訳辞書のコンテンツは、特に明示されている場合を除いて、次のライセンスに従います: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) |
| Copyright © Japan Patent office. All Rights Reserved. |
| この対訳コーパスは独立行政法人情報通信研究機構の研究成果であり、Creative Commons Attribution-Share Alike 3.0 Unportedでライセンスされています。 |
| © 2010, Oracle Corporation and/or its affiliates. Oracle and Java are registered trademarks of Oracle and/or its affiliates.Other names may be trademarks of their respective owners. |
| Copyright (C) 1994-2004 The XFree86®Project, Inc. All rights reserved. licence Copyright (C) 1995-1998 The X Japanese Documentation Project. lisence |
| Copyright © 2001 - 2008 by the PEAR Documentation Group. This material may be distributed only subject to the terms and conditions set forth in the Open Publication License, v1.0 or later (the latest version is presently available at http://www.opencontent.org/openpub/ ). |
| Copyright (c) 2001 Robert Kiesling. Copyright (c) 2002, 2003 David Merrill. The contents of this document are licensed under the GNU Free Documentation License. Copyright (C) 1999 JM Project All rights reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)