| 意味 | 例文 |
Control flagの部分一致の例文一覧と使い方
該当件数 : 1013件
When it is confirmed that the test command has been received, a test command reception flag is reset, and the value of a display control process flag is changed to the value corresponding to a test process.例文帳に追加
テストコマンドを受信していることを確認したら、テストコマンド受信フラグをリセットし、表示制御プロセスフラグの値をテスト処理に応じた値にする。 - 特許庁
In addition, the MAC frame reception side refers to the addition linkage flag and the linkage terminal flag so as to control the separation of the linked input data.例文帳に追加
また、MACフレーム受信側では追加連結フラグおよび連結終端フラグを参照し、連結された入力データを分離するよう制御する。 - 特許庁
A main CPU 64 determines whether an MB operating flag is "on" or not by referring to a control RAM 66 if a BB operating flag is not "on" (S34).例文帳に追加
メインCPU64は、制御RAM66を参照して、BB作動中フラグが“オン”でない場合、MB作動中フラグが“オン”であるか否かを判別する(S34)。 - 特許庁
When the selective command is executed, the other operation code is retained on a second control signal retention circuit 16 and a flag in accordance with the value of the parameter is retained on a flag retention circuit 22.例文帳に追加
選択命令実行時、他のオペコードは第2制御信号保持回路16に保持され、変数の値に応じたフラグがフラグ保持回路22に保持される。 - 特許庁
A presentation control unit analyzes a flag command (S2231), and refers to a mode flag (S2232), before receiving, from a game control unit, a command for starting the operation of an accessory continuous operation device, and checks whether the mode flag has a value of 1, 2, or 3 (S2233).例文帳に追加
演出制御部は、遊技制御部からの役連装置作動開始コマンドを受信する前にて、条件装置コマンドの解析(S2231)およびモードフラグの参照(S2232)を行い、モードフラグの値が1、2または3であるか否かを調べる(S2233)。 - 特許庁
A performance control device sets a remaining count nondisplay flag, when receiving a second reduced time control command and resets the remaining count nondisplay flag when receiving the second condition control command, and displays remaining count on the basis of the first reduced time control command and the second reduced time control command when the remaining count nondisplay flag is not set.例文帳に追加
演出制御装置は、第2時短制御コマンドを受信したときは、残回数非表示フラグをセットし、第1状態制御コマンド、第2状態制御コマンドを受信したときは、残回数非表示フラグをリセットし、残回数非表示フラグがセットされていないときは、第1時短制御コマンド、第2時短制御コマンドに基づいて残回数を表示する。 - 特許庁
To make it possible to control processing for H.264/MPEG-4 MVC encoded data in accordance with the value of a flag.例文帳に追加
H.264/MPEG-4 MVCの符号化データの処理をフラグの値に応じて制御することができるようにする。 - 特許庁
The control unit 11 does not perform the dial-up to the access point 31 when the flag is 'NG'.例文帳に追加
一方、制御部11は、フラグが「NG」のときは、アクセスポイント31へのダイヤルアップを行わない。 - 特許庁
A control unit 32 sets a flag in an ON state when format information is stored in the storage part 31.例文帳に追加
制御部32は、記憶部31にフォーマット情報が記憶されると、フラグをオンの状態にする。 - 特許庁
The flag of the individual controller of the interruption request read from the control buffer 18 is reset.例文帳に追加
制御バッファ18から読み出された割込要求の個別制御装置のフラグはリセットされる。 - 特許庁
When a performance control part of the game machine determines that a previous determination command is stored (Yes in S2201), it determines whether a prediction flag is turned ON or not (S2203) after turning ON a suspension flag in a suspension flag storage region (S2202).例文帳に追加
演出制御部は、事前判定コマンドの記憶ありと判断すると(S2201でYes)、保留フラグ記憶領域にて保留フラグをONにした後(S2202)、予兆フラグがONか否かを判断する(S2203)。 - 特許庁
Further, the control section clears the restriction flag when the number of calls is lower than a predetermined value after the restriction flag is set on and floods the cleared restriction flag to the adjacent node.例文帳に追加
また、制御部は、規制フラグがオンに設定された後、呼の個数が予め決められた値を下回った場合に規制フラグをオフに設定し、オフに設定された規制フラグを隣接するノードに対してフラッディングする。 - 特許庁
A control means 21 of the personal computer 10 decides the value of a control flag based on the conditions set for each of the file attributes.例文帳に追加
パソコン10の制御手段21は、ファイル属性毎に設定された条件に基づいて、制御フラグの値を決定する。 - 特許庁
To provide an intelligence type traffic control robot for protecting a pedestrian with a flag signal for traffic control on a road.例文帳に追加
道路上で交通統制のための手信号を行って歩行者を保護できる知能型交通統制ロボットを提供する。 - 特許庁
When a sub-control board 106 receives an error report command for performing the error report from a main control board 102, an error report flag setting part 106E sets an error report flag.例文帳に追加
サブ制御基板106がエラー報知を実行するためのエラー報知コマンドを主制御基板102から受信した場合には、エラー報知フラグ設定部106Eによりエラー報知フラグが設定される。 - 特許庁
When the control circuit 63 detects that the flag information denotes the request to its own NE, the control circuit 63 conducts revision processing of the cross connect information according to a cross connect information number in use and set to the flag information.例文帳に追加
フラグ情報が自NEに対する要求であることを検知すると、そのフラグ情報に設定されている使用クロスコネクト情報番号に従ってクロスコネクト情報の変更処理を行う。 - 特許庁
An output control section 26 reads the discontinuous indicator flag from the input control sections 2711,... in the case of multiplexing the PES onto one TS and providing an output and gives this discontinuous indicator flag to a TP header.例文帳に追加
出力制御部26は、PESを1本のTSに多重化して出力する際に、入力制御部27_11,・・・から不連続インディケータフラグを読み出し、TPヘッダにこの不連続インディケータフラグを付与する。 - 特許庁
A ' period for the establishment of the special prizes', during which the special control for facilitating the establishment of the special prizes is executed under the setting of the special win flag, is provided after the 'flag accumulation period', during which none of such special control is executed even under the setting of the special win flag.例文帳に追加
前記特別当選フラグの設定時には特別の賞が成立し易い特別の制御が実行される「特別の賞の成立期間」を、前記特別当選フラグの設定時であっても前記特別の制御が実行されない「フラグ蓄積期間」の後に設ける。 - 特許庁
When FLAG(SLIP) is 1, a target value tTc2slip for slip control is set to a clutch transmission torque capacity target value tTc2 by the selection means 38, and the target value tTmslip for slip control is set to the motor torque target value tTm by the selection means 41 so that the slip control of the clutch can be achieved.例文帳に追加
FLAG(SLIP)=1なら、選択手段38がクラッチ伝達トルク容量目標値tTc2にスリップ制御用目標値tTc2slipをセットし、選択手段41がモータトルク目標値tTmにスリップ制御用目標値tTmslipをセットしてクラッチのスリップ制御を行う。 - 特許庁
An On-curve Flag, coordinates (information about contours of the number of strokes constituting characters) of control point data and an Overlapped Flag (information representing a part where the strokes are overlapped) are stored and the contours of the strokes except the part where the strokes are overlapped are drawn based on the pieces of information.例文帳に追加
制御点データのOn-curve Flag、座標(文字を構成する字画の輪郭の情報)と、Overlapped Flag(前記字画が重なっている部分を表す情報)とを記憶し、それら情報に基づいて前記字画が重なっている部分を除いた前記字画の輪郭を描画するようにした。 - 特許庁
A main control section 41 controls to derive a chance symbol, when missing BB winning or RB winning under an establishment of a BB flag or RB flag, or when missing cherry symbol winning or water melon symbol winning under no establishment of the BB flag or RB flag.例文帳に追加
メイン制御部41は、BBフラグまたはRBフラグの成立状態におけるBB入賞またはRB入賞の取りこぼし時、またはBBフラグまたはRBフラグの非成立状態におけるチェリー入賞、スイカ入賞の取りこぼし時にチャンス目を導出させる制御を行う。 - 特許庁
When the flag is validated, the broadcast station control apparatus 3 informs the server 2 about the validated flag when the flag is validated, and the server 2 refers to the user information storage section 22 and generates and transmits advance notice mail of the decisive scene on the basis of program information corresponding to the validated flag.例文帳に追加
フラグが有効にされた場合、放送局制御装置31からサーバ2に対して通知され、サーバ2ではユーザ情報記憶部22を参照してその有効にされたフラグに対応する番組情報に基づいて決定的なシーンの事前通知メールが生成され、送信される。 - 特許庁
The control unit 211, if the predetermined resource saving function has been selected for the setup contents, turns on a resource saving flag of printing data and outputs the flag to a printer 1.例文帳に追加
制御部211は、設定内容に所定の省資源化機能が選択されている場合に、印刷用データの省資源化フラグをオンして、プリンタ1へ出力する。 - 特許庁
The FIFO read control part activates only the FIFO read enable signal corresponding to the memory not indicating empty status according to the FIFO empty flag signal and the FIFO almost-empty flag signal.例文帳に追加
FIFOリード制御部は、FIFOエンプティ・フラグ信号およびFIFOオルモスト・エンプティ・フラグ信号により、エンプティ状態を示していないメモリに対するFIFOリードイネーブル信号のみをアクティブ状態とする。 - 特許庁
Then, the main control circuit 711 transmits door opening flag information and ongoing error flag information to a parlor computer 300 through an external centralized terminal panel 59.例文帳に追加
そして、主制御回路711は、外部集中端子板59を介して、ドア開放中フラグの情報とエラー中フラグの情報とをホールコンピュータ300に送信する。 - 特許庁
The control part 61 reads the advertisement content from the main storage part 64 and regenerates it, when the view flag assigns permission of the view, referring to the view flag when an electric power supply is turned on.例文帳に追加
制御部61は、電源オン時に視聴フラグを参照し、視聴フラグが視聴可を指定する場合には、主記憶部64から広告コンテンツを読み出して再生する。 - 特許庁
Both of the treatment and the skip treatment can be operated by the skip control flag.例文帳に追加
このように処理およびスキップする処理の双方についてスキップ制御フラグによって操作することができる。 - 特許庁
Hereupon, the sensor control part 70 sets a sensor deterioration flag Fsr of an inial value 0 to 1 in a step S9.例文帳に追加
すると、センサ制御部70は、ステップS9で初期値0のセンサ劣化フラグFsrを1とする。 - 特許庁
A copy flag detector 42 of 13941/F41 of a device detects copy generation control information.例文帳に追加
機器の1394I/F41のコピーフラグ検出器42は、CIPヘッダ内のコピー世代管理情報を検出する。 - 特許庁
In the low power consumption mode, the data inversion control circuit functions to generate an inversion flag as an additional bit.例文帳に追加
低消費電力モードでは、データ反転制御回路が機能し、反転フラグを付加ビットとして生成する。 - 特許庁
When the data/control flag 61 is '0', the 8-bit data 60 are successively stored in a data code register 42.例文帳に追加
データ/制御フラグ61が0のとき8ビットデータ60がデータ符号レジスタ42に順次格納される。 - 特許庁
ELECTRONIC DEVICE, INITIALIZING METHOD OF FLAG POSITION OF PHOTO INTERRUPTER GROUP OF ELECTRONIC DEVICE, AND CONTROL PROGRAM OF ELECTRONIC DEVICE例文帳に追加
電子機器、電子機器のフォトインタラプタ群のフラグ位置初期化方法、及び電子機器の制御プログラム - 特許庁
A control part sets a collision detecting flag at the end of layer jump to execute a lens collision detecting mode.例文帳に追加
制御部は、レイヤージャンプ終了時、衝突検知フラグを立ち上げて、レンズ衝突検知モードを実行する。 - 特許庁
To appropriately switch a predetermined member to a predetermined control position without hitting a flag member against a stopper.例文帳に追加
フラグ部材をストッパに当てることなく、所定の部材を所定の制御位置へ適切に切り替えること。 - 特許庁
When the counter jumps, the program counter control part 10 transmits a signal h to the register 2 to erect the flag at the next cycle.例文帳に追加
カウンタがジャンプする場合は、次の周期でフラグが立つようにレジスタ2に信号hを送る。 - 特許庁
The refresh control signal is outputted to the outside as a refresh flag while a memory cell is refreshed.例文帳に追加
リフレッシュ制御信号は、メモリセルがリフレッシュされる間にリフレッシュフラグとして外部に出力される。 - 特許庁
In a camera picture control processing, a performance control CPU finishes the processing when a selection state confirmation flag is put off.例文帳に追加
カメラ画像制御処理において、演出制御用CPUは、選択状態確認フラグがオフ状態であれば処理を終了する。 - 特許庁
The database read control section 13b sets the delete flag in the routing information corresponding to the database read control section 13b in response to this instruction.例文帳に追加
この指示に応じて、データベース読込制御部13bは、データベース読込制御部13bに該当する経路情報に消フラグを立てる。 - 特許庁
The main control circuit (71) of the game machine (1) updates an AT operation preparation flag to be ON on the basis of the information of an under-RT-operation flag and an under-AT-operation flag in a game for which BB is determined as an internal winning combination.例文帳に追加
遊技機(1)の主制御回路(71)は、内部当籤役としてBBを決定したゲームにおけるRT作動中フラグとAT作動中フラグとの情報に基づいて、AT作動準備フラグをオンに更新する。 - 特許庁
A digital signal having a control flag regarding a temporal copying permission is inputted, temporarily recorded on a recording medium based on the condition of the flag, and temporarily reproduced from the recording medium based on the condition of the flag.例文帳に追加
一時的コピー許可に関する制御フラグを有するディジタル信号を入力し、ディジタル信号を制御フラグの条件に基づき一時的に記録媒体に記録し、制御フラグの条件に基づき一時的に記録媒体から再生する。 - 特許庁
A time difference filter control part 18F generates a first detection flag on the basis of the first data and generates a write stop flag for stopping the writing of the detection area image memory 80 on the basis of the first detection flag.例文帳に追加
時間差分フィルタ制御部18Fは、第1のデータに基づいて第1検出フラグを生成し、更に第1検出フラグに基づいて、検出領域画像メモリ80の書き込みを停止するための書き込み停止フラグを生成する。 - 特許庁
Interruption control means 180 and 181 varies the value of a flag means 182 182 after saving the value of the flag means 182 in response to a specific interruption to the arithmetic control means, and reloads the saved value to the flag means 182 in response to a recovery from the interruption.例文帳に追加
割り込み制御手段(180,181)は、演算制御手段に対する所定の割り込みに応答して前記フラグ手段の値を退避してから当該フラグ手段の値を変更し、前記割り込みからの復帰に応答して前記退避された値をフラグ手段に復帰させる。 - 特許庁
A track control table is provided in the controller, a flag is provided to indicate a factory deliver time format, the factory deliver time format flag of the control table is set to "1" in a factory format time, and only the control table is transferred to a disk.例文帳に追加
制御装置内にトラック管理テーブルを設け、工場出荷時フォーマットを示すフラグを設け、工場フォーマット時は、この管理テーブルの工場出荷時フォーマットフラグを“1”に設定し、管理テーブルのみをディスクへ転送することにより実現する。 - 特許庁
The game control part transmits the flag command to the presentation control part (S203) at the time of winning a prize other than the small prize of watermelons or the small prize of cherries (S202) and does not transmit the generated flag command to the presentation control part in the other cases.例文帳に追加
遊技制御部は、スイカの小役またはチェリーの小役以外の役にに当選しているときには(S202)、演出制御部にフラグコマンドを送信する(S203)が、そうでない場合は、生成したフラグコマンドを演出制御部に送信しない。 - 特許庁
A CPU, in a big win finish processing, transmits a big win finish display specification command and, if a special control start flag is set, sets a special control executing flag, and determines a special control base according to the number of variations of a variable display in the last special control.例文帳に追加
大当り終了処理において、CPUは、大当り終了表示指定コマンドを送信し、特別制御開始フラグがセットされていれば、特別制御実行中フラグをセットし、前回の特別制御での可変表示の変動回数に応じて特別制御ベースを決定する。 - 特許庁
After the contents of an exclusive control flag are read, the exclusive control flag is shifted to contents showing the unavailability of the resources and shifted to contents showing the availability of the resources by writing operation.例文帳に追加
この発明は、排他制御フラグの内容が読み出された後、排他制御フラグはリソースの使用不可を示す内容に遷移し、書き込み動作によりリソースの使用可能を示す内容に遷移するように構成される。 - 特許庁
When internal drawing is performed in the game control part by the operation of a start lever, the game control part generates a flag command in the state of a winning flag set as the result of the internal drawing as it is (S201).例文帳に追加
スタートレバーの操作によって遊技制御部で内部抽選が行われれると、遊技制御部は、内部抽選の結果として設定された当選フラグの状態のままのフラグコマンドを生成する(S201)。 - 特許庁
When the win flag for the special win is set, a control unit executes the control process in which the symbol '7' is dragged to the win line in every game, while the win flag is carried over until the special win is established.例文帳に追加
制御部は、特別入賞用の入賞フラグがセットされているとき、特別入賞が成立するまで入賞フラグを持ち越しながら、ゲーム毎に、「7」のシンボルを入賞ラインに引き込むための制御を実行する。 - 特許庁
CPU for display control sets a figure pattern assigning command unreceiving information pattern table as a lamp control table unless a settled command unreceiving flag is set when a temporary figure pattern employing flag is set.例文帳に追加
表示制御用CPUは、暫定図柄使用フラグがセットされている場合には、確定コマンド未受信フラグがセットされていなければ、ランプ制御テーブルとして図柄指定コマンド未受信報知パターンテーブルを設定する。 - 特許庁
| 意味 | 例文 |
| Copyright © Japan Patent office. All Rights Reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|