Preamplifierを含む例文一覧と使い方
該当件数 : 527件
The output of the RGB preamplifier 12 to which the reference Video signal circuit 1 is connected connects to a voltage hold circuit by switching a switch 8 at the same timing as that of the switch 4 and the circuit 9 holds a peak level as a clip voltage.例文帳に追加
基準Video信号回路1が接続されたときのRGBプリアンプ増幅器12の出力をスイッチ4と同じタイミングでスイッチ8を切り換え、電圧ホールド回路9に接続し、ピークレベルをクリップ電圧として保持する。 - 特許庁
The preamplifier 110 has an input gain stage receiving a signal from an MR head 128, a thermal asperity transient correcting circuit 111, and an output buffer outputting a reader output to a read channel.例文帳に追加
本前置増幅器110は、MRヘッド128からの信号を受取る入力利得段、サーマルアスペリティ過渡的状態補正回路111及び読取器出力を読取チャンネルへ出力する出力バッファを具備している。 - 特許庁
The preamplifier 110 receives the switching signal from the switching signal generator 120 and sets the equalization gain band to an optimum value by switching e.g. a feedback resistor or the like on the basis of the switching signal.例文帳に追加
前置増幅器110は、切替信号発生器120から切替信号を入力し、当該切替信号に基づいて、例えば帰還抵抗を切替える等して、等化利得帯域を最適な値に設定する。 - 特許庁
A gain setting apparatus 100 that externally performs setting of a magnetic disk apparatus 10 before shipment causes a servo gain setting unit 111 to set a servo data gain for a preamplifier 40 by a gain setting unit 111 for servo data.例文帳に追加
磁気ディスク装置10に対し、出荷前に行う設定を外部から行う増幅率設定装置100は、まず、サーボデータ用増幅率設定部111により、プリアンプ40のサーボデータ用増幅率を設定する。 - 特許庁
To provide a burst optical receiver capable of correctly reproducing a digital signal pulse at the time of switching gains of a burst preamplifier even when signal light with different light intensity is inputted to each signal cell.例文帳に追加
各信号セル毎に光強度の異なる信号光が入力される場合でも、バーストプリアンプの利得切り換え時に誤りなくデジタルの信号パルスを再生することが可能なバースト光受信器を提供する。 - 特許庁
The test apparatus comprises a head load mechanism for receiving and positioning the read/write head during testing, and a multi-channel preamplifier arranged to interface plural channels to a measurement system.例文帳に追加
前記試験装置は、テスト中に、前記読取り/書込みヘッドを受容する及び位置決めするためのヘッドロード機構、及び複数のチャネルが測定システムとインターフェースで接続するように配置されたマルチチャネル前置増幅器を具備する。 - 特許庁
To restrain an increase of the height of an optical module in the height direction of the same on which a light receiving element, a preamplifier integrated circuit, etc. are mounted, and to restrain a long-term position displacement of the light receiving element which is caused by low-temperature solder bonding.例文帳に追加
受光素子やプリアンプ集積回路などを搭載した光モジュールの高さ方向に対する高さの増大を抑えるとともに、低温はんだ接合に起因する受光素子の長期的位置ズレを抑える。 - 特許庁
The Preamplifier section 103 includes a excitation light multiplexer 114a and an excitation light source 115a connected at the extension of the function of the optical transmission apparatus and for applying Raman amplification to the signal on the transmission line 101.例文帳に追加
Preアンプ部103は、励起光合波器114aと、励起光合波器114aに対して装置の機能拡張時に接続され、伝送路101をラマン増幅するための励起光源115aとを備える。 - 特許庁
When a preamplifier receives an infrared signal from a television remote controller, an infrared receiving controller 15 outputs an interruption request signal to a keyboard controller CPU 11 to notify that interruption from the television remote controller is generated.例文帳に追加
プリアンプがテレビリモコンからの赤外線信号を受信すると、赤外線受信コントローラ15は、割り込み要求信号をキーボードコントローラCPU11に出力し、該テレビリモコンからの割り込みが発生したことを通知する。 - 特許庁
A first average voltage generation circuit 5 extracts an average voltage from an output signal of the loopback circuit and a second average voltage generation circuit 6 extracts an average voltage from the output signal of the preamplifier circuit.例文帳に追加
第1平均電圧生成回路5は折返し回路の出力信号から平均値電圧を抽出し、第2平均電圧生成回路6は前置増幅器の出力信号の平均値電圧を抽出する。 - 特許庁
To provide an optical transmission system that optimizes a position of a remote stimulation preamplifier and the length of a rare-earth element added optical fiber so as to bring the worst value of an optical SNR at a receiving end to the best in the case of assuming every optical cable patching position.例文帳に追加
あらゆる光ケーブル割入れ位置を想定したときに受信端での光SNRの最悪値が最良になるように、遠隔励起プリアンプの位置および希土類添加光ファイバの長さを最適化する。 - 特許庁
While a speaker is connected to the broadcast line via a matching transformer, a pickup coil is connected to a preamplifier section of the hearing aid apparatus, and the pickup coil is placed in the vicinity of the matching transformer to magnetically couple the hearing aid apparatus to the broadcast line.例文帳に追加
放送ラインにマッチングトランスを介してスピーカを接続する一方、補聴装置のプリアンプ部にピックアップコイルを接続し、同ピックアップコイルを上記マッチングトランスの近傍に配置して、上記放送ラインに補聴装置を磁気結合した。 - 特許庁
It is hereby possible to perform various signal processings by amplifying a detected current Ip using the preamplifier circuit 10 and output a monitor signal Vm responsive to the detection current Ip using the monitor circuit 11.例文帳に追加
これにより、前置増幅回路10を用いて検出電流Ipを増幅して各種の信号処理を行うことができると共に、モニタ回路11を用いて検出電流Ipに応じたモニタ信号Vmを出力することができる。 - 特許庁
Alternatively, the resistor R1 connected to a bias power supply Vref is provided to secure high input impedance of the preamplifier 11, to sufficiently reduce the capacity and size of the capacitor C1 and miniaturize the circuit scale.例文帳に追加
また、バイアス電源Vrefに接続する抵抗R1を設けることにより、プリアンプ11の高入力インピーダンス性を確保し、コンデンサC1の容量及びサイズを十分小さくして回路規模を小さくすることができる。 - 特許庁
Charges accumulated in the analysis subject net 1000 are output outside via the preamplifier 3, while charges accumulated in the front-stage net 1100 are output via the second probe needle 2 to be eliminated from the front-stage net.例文帳に追加
解析対象ネット1000に蓄積された電荷はプリアンプ3を介して外部に出力される一方で、前段ネット1100に蓄積された電荷は第2のプローブ針2を介して出力され前段ネットから排除される。 - 特許庁
The second preamplifier 40 compares a second reference signal/VREF with the data DATA and outputs a third output signal V2P and a fourth output signal V2N to the voltage sense amplifier 50 on the basis of the compared result.例文帳に追加
第2プレアンプ40は第2基準信号/VREFとデータDATAとを比較し、その比較結果に基づき第3出力信号V2P及び第4出力信号V2Nを電圧感知増幅器50に出力する。 - 特許庁
The preamplifier circuit 10 including the differentiation circuit 101 for differentiating a read signal read out from a read head and a read/write channel 11 including the TA detecting circuit 11 are disclosed in the disk drive utilizing the perpendicular magnetic recording method.例文帳に追加
垂直磁気記録方式のディスクドライブにおいて、リードヘッドにより読出されたリード信号を微分するための微分回路101を含むプリアンプ回路10及びTA検出回路111を含むリード/ライトチャネル11が開示されている。 - 特許庁
A gain setting part 102 sets a corresponding gain Kp in a preamplifier part 10 in each candidate for the total gain Kt, and sequentially sets a gain Ka and a gain Kf satisfying the total gain Kt in the AD converting part 40 and the FIR filter part 50.例文帳に追加
ゲイン設定部102は、合計ゲインKtの候補ごとに、対応するゲインKpを前置増幅部10に設定し、合計ゲインKtを満たすゲインKaおよびゲインKfをAD変換部40およびFIRフィルタ部50に順次設定する。 - 特許庁
The first preamplifier 30 compares a first reference signal VREF with the data DATA and outputs a first output signal V1P and a second output signal V1N to the voltage sense amplifier 50 on the basis of the compared result.例文帳に追加
第1プレアンプ30は第1基準信号VREFとデータDATAとを比較し、その比較結果に基づき第1出力信号V1P及び第2出力信号V1Nを電圧感知増幅器50に出力する。 - 特許庁
When initially setting up a tester 500, the preamplifier 514 of a magnetic property measuring device 502 is connected to an emulator 1 to input signals emulating the resistance and resistance change of the magnetoresistive element to use as the standard.例文帳に追加
テスター500の初期設定時に、磁気特性測定装置502のプリアンプ514にエミュレータ1が接続され、エミュレータから、標準となる磁気抵抗効果素子の抵抗値及び抵抗変化をエミュレートした信号が入力される。 - 特許庁
Primary coils 7a and 7b are arranged on a transmission line for propagating signals output from a preamplifier 2, and secondary coils 8a and 8b facing them are short-circuited or opened, thereby making an inductance component of the transmission line variable.例文帳に追加
プリアンプ2から出力される信号を伝搬する伝送線路上に一次側コイル7a、7bを配置し、これと対向する二次側コイル8a、8bを短絡または開放することにより、伝送線路のインダクタンス成分を可変とする。 - 特許庁
The amplification control means 5 controls power of the excited light to be supplied from the laser light source to the optical fiber for amplification in the optical preamplifier 1 according to the light reception current outputted from the photodiode 30 of the optical receiver 3.例文帳に追加
増幅制御手段5は、光受信器3のフォトダイオード30から出力された受光電流に応じて、光前置増幅器1においてレーザ光源から増幅用光ファイバに供給される励起光のパワーを制御する。 - 特許庁
In each light receiving circuit 70, a high-frequency signal based upon infrared rays incident on a photodiode 50 is inputted to an add circuit 84 through a preamplifier circuit 78, a buffer amplifier circuit 80 and a switching circuit 82.例文帳に追加
複数の受光回路70のそれぞれにおいて、フォトダイオード70に入射された赤外線に従う高周波信号が、前置増幅回路78,バッファ増幅回路80およびスイッチ回路82を介して、加算回路84に入力される。 - 特許庁
The radio signals preamplified by a preamplifier 204 are outputted to an antenna direction control part 240, and the antenna direction control part 240 controls the receiving direction of the receiving antenna 202 based on the receiving power of the radio signals.例文帳に追加
前置増幅器204において前置増幅処理された無線信号はアンテナ方向制御部240へ出力され、アンテナ方向制御部240は、無線信号の受信電力に基づいて受信アンテナ202の受信方向を制御する。 - 特許庁
One or more other channels of the multi-channel preamplifier are connected to the measurement system or have a connector for connecting to another device for interfacing the another device to the measurement system.例文帳に追加
前記マルチチャネル前置増幅器の1以上の他のチャネルは、前記測定システムに接続しているか、又は、別の装置と接続するためのコネクタであって該別の装置を前記測定システムにインターフェースで接続するためのものを有する。 - 特許庁
A light-receiving element (PD) 22 and a preamplifier circuit 23 having already been prepared for an optical reception section 11 are used in common to detect a light emission output from the light-emitting element (LD) 18 of an optical transmission section 5 and to control the output to be a constant value.例文帳に追加
光送信部5の発光素子(LD)18からの発光出力を検出して一定値に制御するために、光受信部11として既に用意されている受光素子(PD)22と前置増幅回路23を共用する。 - 特許庁
The energy saving drive unit 60 for suppressing the LED radiation temperature includes: a direct-current power supply 10; a pulse oscillator 11; a preamplifier 12; a carrier signal control unit 20; a voltage-current control unit 30; and a feedback signal circuit 50.例文帳に追加
LED放熱温度を抑制する省エネルギー駆動装置60は、直流電源10、パルス発振器11、プリアンプ12、キャリア信号制御ユニット20、電圧電流制御ユニット30およびフィードバック信号回路50を備える。 - 特許庁
The optical signal receiver 90 is provided with: a light receiving section 10; a preamplifier 110; an automatic gain control amplifier 12; a clock extraction and signal identification section 13; an automatic identification level control circuit 14; and a switching signal generator 120.例文帳に追加
光信号受信器90は、受光部10、前置増幅器110、自動利得制御増幅器12、クロック抽出及び信号識別部13、自動識別レベル制御回路14、及び切替信号発生器120を備える。 - 特許庁
A servo gate signal, which indicates whether magnetic information read out from a disk 70 by a head 60 is servo data for positioning-use or user data stored in a user area available for reading and writing of given data, is input in a preamplifier 40.例文帳に追加
ヘッド60がディスク70から読み出した磁気情報が、位置決め用のサーボデータであるか、任意のデータを読み書き可能なユーザエリアに格納されたユーザデータであるかを示すサーボゲート信号をプリアンプ40に入力する。 - 特許庁
To provide a preamplifier and optical receiver capable of excellently identifying and reproducing a signal without requiring complicated threshold control, voltage control and the like to a peripheral circuit even when a signal of large light power is input.例文帳に追加
大きな光パワーの信号が入力された場合であっても周辺回路に煩雑な閾値制御や電圧制御を必要とすることなく良好に信号の識別再生ができる前置増幅器および光受信装置を提供する。 - 特許庁
To provide an electronic apparatus provided with a sound output apparatus including a preamplifier and an output amplifier requiring a bias voltage wherein the output amplifier can individually be turned ON / OFF and pop noise caused in the ON state is reduced.例文帳に追加
バイアス電圧を必要とする前置増幅器及び出力増幅器を有する音声出力装置を備えた電子装置において、出力増幅器を個別にオンオフ可能にするとともに、そのオン時のポップ音を低減すること。 - 特許庁
Moreover, since the preamplifier 8 can be allocated in the center position surrounded by a capacitor 16 and electrodes 4, 5 for the connection to the outside, it is made possible to shorten wiring 17, 19, 22, and the like which are connected to these, so that the noiseproof property can be improved.例文帳に追加
また、プリアンプ8を、外部接続用の電極4,5とコンデンサ16とによって取囲まれる中央位置に配設できるので、これらに接続する配線17,19,22等も短尺化でき、耐ノイズ性を高めることができる。 - 特許庁
The circuit board 32 for connecting a head gimbal assembly to a writing/reading electrical circuit is provided with conductive taps 40 which are electrically connected to head pads 34 to be connected to the head and a preamplifier pad 36 to be connected to the electrical circuit.例文帳に追加
ヘッドジンバルアセンブリと書込/読出用電気回路との間をつなぐ回路ボード32は、ヘッドへ接続されるヘッドパッド34及び電気回路へ接続されるプリ−アンプパッド36と電気的に接続される電導性タップ40を備える。 - 特許庁
In the transmission power amplifier circuit with a temperature compensation function, power amplifier 151, 152 employing gallium arsenide field effect transistors and a preamplifier provided with a thermister temperature compensation circuit are integrated into one integrated circuit, and the power amplifiers 151, 152 and the preamplifier including the thermister temperature compensation circuit are formed on a substrate 150 of the integrated circuit in the state that ground circuits 155, 156 are independent of each other.例文帳に追加
温度補償機能付きの送信電力増幅回路15bにおいて、ガリウム砒素電界効果型トランジスタを使用した電力増幅器151,152と、サーミスタ温度補償回路154を備えた前置増幅器153とを1個の集積回路に収容し、かつその際に電力増幅器151,152と、温度補償回路154を含む前置増幅器153とを、集積回路の基板150上においてその接地回路155,156が独立した状態で形成するようにしたものである。 - 特許庁
The ultrasonic probe 10 transmits/receives ultrasonic waves relative to a subject 45 by a plurality of ultrasonic vibrators 15 disposed in an array and incorporates preamplifier groups 17 amplifying received feeble ultrasonic echoes by acquiring tissue information inside the subject 45.例文帳に追加
超音波プローブ10は、アレイ状に配列された複数の超音波振動子15で超音波を被検体45に送受信し、該被検体45内の組織情報を得て受信される微弱な超音波エコーを増幅するプリアンプ群17を内蔵している。 - 特許庁
Because a transmission side preamplifier 16a is not used in a CWD operation, the control part 10 stops the bias voltage via bias control line 20a and controls the amplification factor to the minimum value via the amplification factor control line 22a.例文帳に追加
制御部10は、CWD動作において、送信側のプリアンプ16aが利用されていないため、バイアス制御線20aを介してそのバイアス電圧を停止させ、さらに、増幅率制御線22aを介して増幅率を最小値に制御する。 - 特許庁
A preamplifier 105 amplifies received signals produced by the first and second burst waves, a prefilter 106 allows only a predetermined band to pass, an A/D converter 107 performs conversion to a digital data string, and a beam former 108 forms a received beam in a predetermined azimuth.例文帳に追加
プリアンプ105は第1・第2のバースト波によって生じる受信信号を増幅し、プリフィルタ106は所定帯域のみ通過させ、A/Dコンバータ107はディジタルデータ列に変換し、ビームフォーマ108が所定方位に受信ビームを形成する。 - 特許庁
The switch control circuit 17 turns off the switches 15, 16 at operation stop to stop the power amplifier 12, the opens the switch 14 to stop the preamplifier 11 and throws the transmission reception changeover switch 13 to a position of not selecting the power amplifier 12.例文帳に追加
動作停止時にスイッチ制御回路17は、スイッチ15,16をオフとしてパワーアンプ12を停止させたのち、スイッチ14をオフとしてプリアンプ14を停止させるとともに、送受切換スイッチ13をパワーアンプ12を選択しない状態に切り換える。 - 特許庁
An optical preamplifier 1 which has an optical fiber for amplification and a laser light source for supplying an excited light to the optical fiber for amplification, and amplifies the optical signal is installed at the prestage of the optical receiver 3 having a photodiode 30 that detects the optical signal.例文帳に追加
光信号を検出するフォトダイオード30を有する光受信器3の前段に、増幅用光ファイバと、増幅用光ファイバへと励起光を供給するレーザ光源とを有し、光信号を増幅する光前置増幅器1を設置する。 - 特許庁
To provide a transimpedance type preamplifier capable of receiving signals of a plurality of transmission rates which are largely different from one another, securing a wide dynamic range with sensitivity according to the transmission rate and securing an optimal frequency band.例文帳に追加
速度が大幅に異なる複数の伝送速度の信号を受信し、伝送速度に応じた受信感度で広いダイナミックレンジを確保するとともに、最適な周波数帯域を確保することができるトランスインピーダンス型の前置増幅器を提供する。 - 特許庁
The internal sounds caught by the chest piece part are input in the band pass filter via the preamplifier, power supply noise and other noises are removed by the band pass filter, only sounds with targeting waveforms of cycle sounds are taken out and input into the digital equalizer.例文帳に追加
チェストピース部で捕捉した体内音は前置増幅器を介しバンドパスフィルターへと入力し、該バンドパスフィルターで電源ノイズや雑音を取り除かれ、目的とするサイクル音の波形の音のみの取出しを行い、デジタルイコライザーへと入力される。 - 特許庁
In the contrast enhancing method of the high intensity laser, high contrast is obtained by amplifying signal light output from a laser oscillator, a preamplifier or the like by using OPCPA (Optical Parametric Chirped Pulse Amplification) excited by pump light having a short pulse width identical with that of the signal light.例文帳に追加
高強度レーザーの高コントラスト化法は、レーザー発振器又は前置増幅器等から出力されるシグナル光をシグナル光と同程度の短いパルス幅のポンプ光で励起されたOPCPAで増幅することにより、極めて高いコントラストを得る。 - 特許庁
The optical receiver comprises a back incident PD 2 for receiving an incident light from an optical fiber 10, a substrate 3A for mounting the PD 2, a coaxial package 4 for mounting the substrate 3A, and a preamplifier IC 5 for amplifying an electrical signal from the PD 2.例文帳に追加
光ファイバ10からの入射光を受光する裏面入射形のPD2と、PD2が実装される基板3Aと、基板3Aが実装される同軸型パッケージ4と、PD2からの電気信号を増幅するプリアンプIC5とを具える。 - 特許庁
A preamplifier 11 superimposes a signal for controlling the power source of a CD player 13 or the like on before and after the changing point of a signal for controlling the power source of a power amplifier 17, and transmits it to the CD player 13 or the like and the power amplifier 17.例文帳に追加
プリアンプ11は、パワーアンプ17の電源を制御するための信号の変化点の前および後に、CDプレイヤー13等の電源を制御するための信号を重畳させて、CDプレイヤー13等およびパワーアンプ17に向けて送信する。 - 特許庁
The optical receive module includes a light-receiving element 17 which receives light signal on a metal package board 12 to convert the light signal into an electrical signal, a preamplifier 18 which amplifies the electrical signal, and a plate capacitor 19 located in between a power supply and the ground.例文帳に追加
金属製のパッケージ基板12上に光信号を受光して電気信号に変換する受光素子17と、電気信号を増幅するプリアンプ18と、電源とグランドとの間に平板コンデンサ19とを備えた光受信モジュールである。 - 特許庁
In response to the write command and a precharge command, the control signal generating circuit 32 generates active enable signals ϕWBA0 and ϕWBA1 and the read preamplifier and write buffers 9a and 9b write data stored in FIFOs 8a and 8b to memory cells 1a and 1b.例文帳に追加
ライトコマンド、プリチャージコマンドに応答して、制御信号発生回路32は活性のイネーブル信号φWBA0,φWBA1を発生し、リードプリアンプ&ライトバッファ9a,9bは、FIFO8a,8bに記憶されたデータをメモリセル1a,1bへ書込む。 - 特許庁
The antenna conductors 4 and a feeding point 6 of the antenna conductors 4 are provided to the window glass plate 1 of an automobile, and a series connection circuit comprising a resonance circuit 16 and a preamplifier 7 is connected between the feeding point 6 and a receiver 20.例文帳に追加
アンテナ導体4及びアンテナ導体4の給電点6が自動車の窓ガラス板1に設けられており、給電点6と受信機20側との間に、共振回路16と前置増幅器7との直列接続回路が接続されている。 - 特許庁
Then, the control device 8 controls a gain of the preamplifier device 3 based on an optimum gain associated with a receiving frequency of an FM radio broadcast wave and a calculation point corresponding to a present location of a mobile object.例文帳に追加
そして、制御装置8は、FMラジオ放送波の受信周波数および移動体の現在位置に対応する算出地点に関連付けられた最適利得に基づいて、上記前置増幅装置3の利得を制御することを特徴とする。 - 特許庁
A bias power supply 6 for giving a bias voltage for discharging secondary electrons from a sample 3 is connected to a non-inverted input terminal of an operational amplifier 5 of a preamplifier 4, and hence the DC potential of a probe 1 becomes the bias potential concerned.例文帳に追加
プリアンプ4の演算増幅器5の非反転入力端子には、試料3から二次電子を放出させるためのバイアス電圧を与えるバイアス電源6が接続され、これにより探針1の直流電位は当該バイアス電位となる。 - 特許庁
The circuit 44 changes the resistor value of a current-voltage conversion resistor RFM so that the voltage of an output signal VRP comes close to a prescribed voltage, to adjust the gain of the preamplifier 41, on the basis of the signal VRP of the amplifier 42.例文帳に追加
AGC回路44は、メインアンプ42の出力信号VRPに基づいて、該出力信号VRPの電圧を所定の電圧に近づけるように電流電圧変換抵抗RFMの抵抗値を変更してプリアンプ41のゲインを調整する。 - 特許庁
| Copyright © Japan Patent office. All Rights Reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|