| 意味 | 例文 |
split-offの部分一致の例文一覧と使い方
該当件数 : 121件
(ii) A business year within ten years prior to the merger of a merged corporation pertaining to a qualified merger that started on or after the first day of the business year including the day of the said qualified merger of the domestic corporation (hereinafter referred to as the "business year of the merger" in this item) or a business year within ten years prior to the company split of a split corporation pertaining to a qualified split-off-type company split that started on or after the first day of the business year including the day of the said qualified split-off-type company split of the domestic corporation (hereinafter referred to as the "business year of the split succession" in this item): The business year including the day preceding the first day of the business year of the merger or business year of the split succession of the said domestic corporation 例文帳に追加
二 適格合併に係る被合併法人の合併前十年内事業年度のうち当該内国法人の当該適格合併の日を含む事業年度(以下この号において「合併事業年度」という。)開始の日以後に開始したもの又は適格分割型分割に係る分割法人の分割前十年内事業年度のうち当該内国法人の当該適格分割型分割の日を含む事業年度(以下この号において「分割承継事業年度」という。)開始の日以後に開始したもの 当該内国法人の合併事業年度又は分割承継事業年度開始の日の前日を含む事業年度 - 日本法令外国語訳データベースシステム
(iii) A business year within ten years prior to the company split, etc. prescribed in Article 66-8(3)(iii) of the Act (hereinafter referred to as a "business year within ten years prior to the company split, etc." in this Article) of a split corporation, etc. (meaning a split corporation, corporation making a capital contribution in kind , or corporation effecting post-formation acquisition of assets and/or liabilities ; hereinafter the same shall apply in this paragraph and paragraph (8)) pertaining to a qualified spin-off-type company split, etc. (meaning a qualified spin-off-type company split, etc. prescribed in Article 66-8(3)(iii) of the Act; hereinafter the same shall apply in this paragraph and paragraph (8)) (excluding a business year within ten years prior to the company split when falling under the case listed in the next item and a business year within ten years prior to the company split, etc. listed in item (v)): The relevant business year of the said domestic corporation including the first day of a business year within ten years prior to the company split, etc. of the said split corporation, etc. 例文帳に追加
三 適格分社型分割等(法第六十六条の八第三項第三号に規定する適格分社型分割等をいう。以下この項及び第八項において同じ。)に係る分割法人等(分割法人、現物出資法人又は事後設立法人をいう。以下この項及び第八項において同じ。)の同号に規定する分割等前十年内事業年度(以下この条において「分割等前十年内事業年度」という。)(次号に掲げる場合に該当するときの分割等前十年内事業年度及び第五号に掲げる分割等前十年内事業年度を除く。) 当該分割法人等の分割等前十年内事業年度開始の日を含む当該内国法人の各事業年度 - 日本法令外国語訳データベースシステム
(iii) A business year within ten years prior to the company split, etc. prescribed in Article 68-92(3)(iii) of the Act (hereinafter referred to as a "business year within ten years prior to the company split, etc." in this Article) of a split corporation, etc. (meaning a split corporation, corporation making a capital contribution-in-kind, or corporation effecting post-formation acquisition of assets and/or liabilities; hereinafter the same shall apply in this paragraph and paragraph (8)) pertaining to a qualified spin-off-type company split, etc. (meaning a qualified spin-off-type company split, etc. prescribed in Article 68-92(3)(iii) of the Act; hereinafter the same shall apply in this paragraph and paragraph (8)) (excluding a business year within ten years prior to the company split when falling under the case listed in the next item and a business year within ten years prior to the company split, etc. listed in item (v)): The relevant consolidated business year of the said consolidated corporation including the first day of a business year within ten years prior to the company split, etc. of the said split corporation, etc. 例文帳に追加
三 適格分社型分割等(法第六十八条の九十二第三項第三号に規定する適格分社型分割等をいう。以下この項及び第八項において同じ。)に係る分割法人等(分割法人、現物出資法人又は事後設立法人をいう。以下この項及び第八項において同じ。)の同号に規定する分割等前十年内事業年度(以下この条において「分割等前十年内事業年度」という。)(次号に掲げる場合に該当するときの分割等前十年内事業年度及び第五号に掲げる分割等前十年内事業年度を除く。) 当該分割法人等の分割等前十年内事業年度開始の日を含む当該連結法人の各連結事業年度 - 日本法令外国語訳データベースシステム
To provide a fall-off preventing mechanism of a propeller shaft which can prevent the fall-off of a split-type propeller shaft in the vicinity of a joint and which has a simple and small structure and general-purpose properties.例文帳に追加
分割型のプロペラシャフトの脱落をジョイントの近傍で防止することができるとともに、簡素且つ小型な構成で汎用性のあるプロペラシャフトの脱落防止機構を提供する。 - 特許庁
In 1929, some of the areas of the southern and eastern part of the Kamigyo Ward were split off, and were integrated into the newly created Nakagyo Ward, Sakyo Ward, and Higashiyama Ward. 例文帳に追加
昭和4年(1929年)、区の南部と東部の一部地域が分離され、新設の中京区、左京区、東山区に編入された。 - Wikipedia日英京都関連文書対訳コーパス
(ii) The individually taxed amount of retained income: The amount obtained by multiplying respectively the individually taxed amount of retained income for a business year within ten years prior to the company split of a split corporation pertaining to a qualified split-off-type company split by the ratio of the shares, etc. for considering the claims held that are listed in (b) out of the shares, etc. for considering the claims held that are listed in (a): 例文帳に追加
二 個別課税済留保金額 適格分割型分割に係る分割法人の分割前十年内事業年度の個別課税済留保金額にイに掲げる請求権勘案保有株式等のうちにロに掲げる請求権勘案保有株式等の占める割合をそれぞれ乗じて計算した金額 - 日本法令外国語訳データベースシステム
The mold 1 for blow molding is composed of split molds 10, 20 that are split diagonally, which have the cut-off blades 13, 23 arranged in the bottoms of the cavities 12, 22 with the cross-section of an isosceles, right-angled triangle which cavities are formed in the parting planes 11, 21 vertical to the mold clamping direction.例文帳に追加
ブロー成形用金型1は、型締め方向に垂直な分割面11,21に形成された二等辺直角三角形断面のキャビティ12,22の底部に配設された喰い切り刃13,23を備えるハス割金型10,20である。 - 特許庁
(ii) A business year within ten years prior to the merger of a merged corporation pertaining to a qualified merger that started on or after the first day of the consolidated business year including the day of the said qualified merger of the consolidated corporation (hereinafter referred to as the "consolidated business year of the merger" in this item) or a business year within ten years prior to the company split of a split corporation pertaining to a qualified split-off-type company split that started on or after the first day of the consolidated business year including the day of the said qualified split-off-type company split of the consolidated corporation (hereinafter referred to as the "consolidated business year of the split succession" in this item): The consolidated business year including the day preceding the first day of the consolidated business year of the merger or consolidated business year of the split succession of the said consolidated corporation 例文帳に追加
二 適格合併に係る被合併法人の合併前十年内事業年度のうち当該連結法人の当該適格合併の日を含む連結事業年度(以下この号において「合併連結事業年度」という。)開始の日以後に開始したもの又は適格分割型分割に係る分割法人の分割前十年内事業年度のうち当該連結法人の当該適格分割型分割の日を含む連結事業年度(以下この号において「分割承継連結事業年度」という。)開始の日以後に開始したもの 当該連結法人の合併連結事業年度又は分割承継連結事業年度開始の日の前日を含む連結事業年度 - 日本法令外国語訳データベースシステム
iii) Qualified spin-off-type company split, qualified capital contribution in kind or qualified post-formation acquisition of assets and/or liabilities (hereinafter referred to in this item as "qualified spin-off-type company split, etc."): Any part of the taxed amount of retained income or individually taxed amount of retained income of the split corporation, corporation making a capital contribution in kind or corporation effecting a post-formation acquisition of assets and/or liabilities involved in the qualified spin-off-type company split, etc. for each business year within ten years before the company split, etc. (meaning each business year or each consolidated business year that commenced within ten years before the first day of the business year that includes the date of the qualified spin-off-type company split, etc., or each consolidated business year or each business year that commenced within ten years before the first day of the consolidated business year that includes the date of the qualified spin-off-type company split, etc.; the same shall apply in the next paragraph), which is calculated pursuant to the method specified by a Cabinet Order as the amount of income corresponding to the number of shares, etc. of the said specified foreign subsidiary company, etc. transferred to and therefore held by the said domestic corporation through direct and/or indirect ownership as a result of the said qualified spin-off-type company split, while taking into consideration the contents of the claim prescribed in Article 66-6(1 例文帳に追加
三 適格分社型分割、適格現物出資又は適格事後設立(以下この号において「適格分社型分割等」という。) 当該適格分社型分割等に係る分割法人、現物出資法人又は事後設立法人の分割等前十年内事業年度(適格分社型分割等の日を含む事業年度開始の日前十年以内に開始した各事業年度若しくは各連結事業年度又は適格分社型分割等の日を含む連結事業年度開始の日前十年以内に開始した各連結事業年度若しくは各事業年度をいう。次項において同じ。)の課税済留保金額又は個別課税済留保金額のうち、当該適格分社型分割等により当該内国法人が移転を受けた当該特定外国子会社等の直接及び間接保有の株式等の数に対応する部分の金額として第六十六条の六第一項に規定する請求権の内容を勘案して政令で定めるところにより計算した金額 - 日本法令外国語訳データベースシステム
iii) Qualified spin-off-type company split, qualified capital contribution in kind or qualified post-formation acquisition of assets and/or liabilities (hereinafter referred to in this item as "qualified spin-off-type company split, etc."): Any part of the individually taxed amount of retained income or taxed amount of retained income of the split corporation, corporation making a capital contribution in kind or corporation effecting a post-formation acquisition of assets and/or liabilities involved in the qualified spin-off-type company split, etc. for each business year within ten years before the company split, etc. (meaning each consolidated business year or each business year that commenced within ten years before the first day of the consolidated business year that includes the date of the qualified spin-off-type company split, etc., or each business year or each consolidated business year that commenced within ten years before the first day of the business year that includes the date of the qualified spin-off-type company split, etc.; the same shall apply in the next paragraph), which is calculated pursuant to the method specified by a Cabinet Order as the amount of income corresponding to the number of shares, etc. of the said specified foreign subsidiary company, etc. transferred to and therefore held by the said consolidated corporation through direct and/or indirect ownership as a result of the said qualified spin-off-type company split, while taking into consideration the contents of the claim prescribed in Article 66-6(1 例文帳に追加
三 適格分社型分割、適格現物出資又は適格事後設立(以下この号において「適格分社型分割等」という。) 当該適格分社型分割等に係る分割法人、現物出資法人又は事後設立法人の分割等前十年内事業年度(適格分社型分割等の日を含む連結事業年度開始の日前十年以内に開始した各連結事業年度若しくは各事業年度又は適格分社型分割等の日を含む事業年度開始の日前十年以内に開始した各事業年度若しくは各連結事業年度をいう。次項において同じ。)の個別課税済留保金額又は課税済留保金額のうち、当該適格分社型分割等により当該連結法人が移転を受けた当該特定外国子会社等の直接及び間接保有の株式等の数に対応する部分の金額として第六十六条の六第一項に規定する請求権の内容を勘案して政令で定めるところにより計算した金額 - 日本法令外国語訳データベースシステム
(b) The said specified foreign subsidiary company, etc.'s shares, etc. for considering the claims held which are to be transferred from the split corporation, etc. to a domestic corporation set forth in Article 66-8(3) of the Act through the said qualified spin-off-type company split 例文帳に追加
ロ 法第六十六条の八第三項の内国法人が当該適格分社型分割等により当該分割法人等から移転を受ける当該特定外国子会社等の請求権勘案保有株式等 - 日本法令外国語訳データベースシステム
(b) The said specified foreign subsidiary company, etc.'s shares, etc. for considering the claims held which are to be transferred from the split corporation, etc. to a consolidated corporation set forth in Article 68-92(3) of the Act through the said qualified spin-off-type company split 例文帳に追加
ロ 法第六十八条の九十二第三項の連結法人が当該適格分社型分割等により当該分割法人等から移転を受ける当該特定外国子会社等の請求権勘案保有株式等 - 日本法令外国語訳データベースシステム
The split molds 12 are closed while the protruded slide parts 14 are allowed to retreat to bring the peripheries of the cavities 13 to a mutual contact state to form a pintch-off part.例文帳に追加
突出させた摺動部14を後退させながら分割金型12を締めてキャビティ13の周囲を互いに密着させてピンチオフ部を形成する。 - 特許庁
Since when the peeling off, the bean is cracked or split-open of the peel, the temperature of the part becomes higher than that of other parts, the inferior product is sorted out by the existence of this.例文帳に追加
豆に皮の剥離、ひび割れ、はじけなどが生じているとその部分の温度が他部よりも高くなるのでそれの有無で不良判別を行う。 - 特許庁
After FUJIWARA no Tadamichi (1097 - 1164) who served as Sessho (regent), Kanpaku (chief advisor of the Emperor), and Dajodaijin (chancellor) in the twelfth century, the Fujiwara clan split into two branch families, the Konoe family whose founder was Tadamichi's first son Motozane KONOE (1143 - 1166), and the Kujo Family whose founder was Tadamichi's third son Kanezane KUJO (1149 - 1207), and later, the Takatsukasa family split off from the Konoe family, and the Nijo family and the Ichijo family broke off from the Kujo family. 例文帳に追加
藤原氏は、12世紀に摂政、関白、太政大臣を務めた藤原忠通(1097年-1164年)の後、その長男・近衛基実(1143年-1166年)を祖とする近衛家と三男・九条兼実(1149年–1207年)を祖とする九条家の2家に分かれ、その後近衛家からは鷹司家が、九条家からは二条家、一条家が分かれた。 - Wikipedia日英京都関連文書対訳コーパス
Further, two walk-off polarizers are adopted for the two polarization splitter/combiner elements placed side by side, the two walk-off polarizes have the same polarization split distance, and the interval of the two polarization storage optical waveguides is selected to be about a multiple of 2^1/2 of the polarization splitter distance of the walk-off polarizers.例文帳に追加
また、前記併置された2つの偏光分離合成素子が2つのウォークオフ偏光子であって、該2つのウォークオフ偏光子が互いに同量の偏光分離距離を有し、かつ前記2つの偏波保持光導波路の間隔が、ウォークオフ偏光子の偏光分離距離の約2^1/2倍とする。 - 特許庁
The excitation control section 20 is configured to turn on and off the switching elements Q1-Q8, in a predetermined pattern per split step (0.45°) obtained by dividing a basic step into four.例文帳に追加
励磁制御部20は、スイッチング素子Q1〜Q8を、基本ステップを4分割した分割ステップ(0.45°)毎に所定のパターンでオンオフさせることが可能な構成となっている。 - 特許庁
At the time of large current cut-off, pressure inside the heat puffer chamber 11 is high, and the split check valves 14b contact mutually closely without a gap.例文帳に追加
大電流遮断時の状態では、熱パッファ室11内部の圧力が高く、分割されている逆止弁14bは互いに隙間なくぴったりと接触している。 - 特許庁
By rotating the stripping-off roller 42 while closing, the cylindrical film 1 is fed by the holding belts 41 while the work 5 in the cylindrical film 1 is split.例文帳に追加
シゴキローラ42を閉じながら回転させることにより、筒状フィルム1内の被包装物5が分割されつつ、押さえベルト41によって筒状フィルム1が送られる。 - 特許庁
Further, an auxiliary on-off mechanism 60 for opening and closing the split part 32 with respect to the opening 31a of the mold main body 31 between a closing position and an opening position is provided.例文帳に追加
さらに、分割部32を型本体31の開口31aに対して閉じ位置と開き位置との間で開閉する補助開閉機構60を備えている。 - 特許庁
However, after the death of Hideyoshi, Tokitsune retuned to the Imperial Court in 1598 thanks to Ieyasu TOKUGAWA's mediation, and Noritoshi, who was obliged to split off from the Yamashina family, formed the Inokuma family. 例文帳に追加
しかし秀吉の死後、徳川家康の取り成しによって、慶長3年(1598年)言経が朝廷に復帰したため、教利はやむなく分家して猪熊家を興した。 - Wikipedia日英京都関連文書対訳コーパス
A reinforcing sheet 12 is not arranged at an end region 13 of the packaging sheet 10, and a peeling-off sheet 14 composed of split fibrous non-woven fabric is present in this region.例文帳に追加
包装シート10の端部領域13では、補強シート12が設けられておらず、この領域に割繊維不織布からなる剥離シート14が介在している。 - 特許庁
To provide a method and a structure for repairing roof preventing an existing a old corrugated slate plate roof member from being split and preventing metal clamp fitting from coming off.例文帳に追加
老朽化した既設の波形スレート板屋根材を割ったり、クランプ金具が外れたりすることのない屋根改修工法および屋根改修構造を提供する。 - 特許庁
(i) The taxed amount of retained income: The amount obtained by multiplying respectively the taxed amount of retained income for a business year within ten years prior to the company split, etc. of a split corporation, etc. pertaining to a qualified spin-off-type company split, etc. by the ratio of the shares, etc. for considering the claims held that are listed in (b) out of the shares, etc. for considering the claims held that are listed in (a): 例文帳に追加
一 課税済留保金額 適格分社型分割等に係る分割法人等の分割等前十年内事業年度の課税済留保金額にイに掲げる請求権勘案保有株式等のうちにロに掲げる請求権勘案保有株式等の占める割合をそれぞれ乗じて計算した金額 - 日本法令外国語訳データベースシステム
(ii) The individually taxed amount of retained income: The amount obtained by multiplying respectively the individually taxed amount of retained income for a business year within ten years prior to the company split, etc. of a split corporation, etc. pertaining to a qualified spin-off-type company split, etc. by the ratio of the shares, etc. for considering the claims held that are listed in (b) out of the shares, etc. for considering the claims held that are listed in (a): 例文帳に追加
二 個別課税済留保金額 適格分社型分割等に係る分割法人等の分割等前十年内事業年度の個別課税済留保金額にイに掲げる請求権勘案保有株式等のうちにロに掲げる請求権勘案保有株式等の占める割合をそれぞれ乗じて計算した金額 - 日本法令外国語訳データベースシステム
(i) The individually taxed amount of retained income: The amount obtained by multiplying respectively the individually taxed amount of retained income for a business year within ten years prior to the company split, etc. of a split corporation, etc. pertaining to a qualified spin-off-type company split, etc. by the ratio of the shares, etc. for considering the claims held that are listed in (b) out of the shares, etc. for considering the claims held that are listed in (a): 例文帳に追加
一 個別課税済留保金額 適格分社型分割等に係る分割法人等の分割等前十年内事業年度の個別課税済留保金額にイに掲げる請求権勘案保有株式等のうちにロに掲げる請求権勘案保有株式等の占める割合をそれぞれ乗じて計算した金額 - 日本法令外国語訳データベースシステム
(ii) The taxed amount of retained income: The amount obtained by multiplying respectively the taxed amount of retained income for a business year within ten years prior to the company split, etc. of a split corporation, etc. pertaining to a qualified spin-off-type company split, etc. by the ratio of the shares, etc. for considering the claims held that are listed in (b) out of the shares, etc. for considering the claims held that are listed in (a): 例文帳に追加
二 課税済留保金額 適格分社型分割等に係る分割法人等の分割等前十年内事業年度の課税済留保金額にイに掲げる請求権勘案保有株式等のうちにロに掲げる請求権勘案保有株式等の占める割合をそれぞれ乗じて計算した金額 - 日本法令外国語訳データベースシステム
To provide a propeller shaft supporting structure capable of precluding slipping-off of a center bearing fitted on a split shaft while the processing accuracy of the inserted part of a stopper piece for locating the center bearing in the split shaft is relieved and of reducing the number of component parts in use and the man-hours for installation.例文帳に追加
プロペラシャフト支持構造において、分割シャフトとセンタベアリング位置決め用ストッパピースとの挿着部の加工精度を緩和しながら、分割シャフトに嵌合したセンタベアリングの抜け止めを図るとともに、使用部品点数と組付工数の低減を図ること。 - 特許庁
(i) The taxed amount of retained income: The amount obtained by multiplying respectively the taxed amount of retained income for a business year within ten years prior to the company split of a split corporation pertaining to a qualified split-off-type company split by the ratio of the shares, etc. for considering the claims held prescribed in Article 39-16(3)(i) (hereinafter referred to as the "shares, etc. for considering the claims held" in this Article) that are listed in (b) out of the shares, etc. for considering the claims held that are listed in (a): 例文帳に追加
一 課税済留保金額 適格分割型分割に係る分割法人の分割前十年内事業年度の課税済留保金額にイに掲げる第三十九条の十六第三項第一号に規定する請求権勘案保有株式等(以下この条において「請求権勘案保有株式等」という。)のうちにロに掲げる請求権勘案保有株式等の占める割合をそれぞれ乗じて計算した金額 - 日本法令外国語訳データベースシステム
Shares of the said succeeding corporation in a company split or the said parent corporation (excluding shares of a parent corporation (limited to a foreign corporation) issued for a foreign corporation which is a shareholder, etc. of the split corporation through a split-off-type company split carried out by a domestic corporation (excluding the parent corporation's shares managed in a domestic business prescribed in Article 188(7) issued for a foreign corporation listed in items (i) through (iii) of Article 141 of the Act)) issued 例文帳に追加
交付を受けた当該分割承継法人の株式又は当該親法人の株式(内国法人の行つた分割型分割により分割法人の株主等である外国法人が交付を受けた親法人(外国法人に限る。)の株式(法第百四十一条第一号から第三号までに掲げる外国法人が交付を受けた第百八十八条第七項に規定する国内事業管理親法人株式を除く。)を除く。) - 日本法令外国語訳データベースシステム
A pair of depressed parts 4 is formed by cavities 2 of the split molds 1 through the pinch-off part 3 and the blowing nozzle 5 is thrust in the space between the pinch-off part 3 and one depressed part 4 to form a blowing hole 10 in the parison 6.例文帳に追加
分割金型1、1のキャビティ2、2によりピンチオフ部3を介して一対の凹陥部4、4を形成するとともに、ピンチオフ部3と一方の凹陥部4の間に吹き込みノズル5を突き刺してパリソン6に吹込み孔10を形成する。 - 特許庁
A molten parison 6 is arranged between split molds 1 and a part of the parison 6 is grasped by the split molds 1 by closing the molds 1 to form a pinch-off part 3 and a pressure fluid is subsequently introduced into the parison 6 from a blowing nozzle 5 to form the blow molding 8.例文帳に追加
溶融状態のパリソン6を分割金型1、1間に配置し、型閉じしてパリソン6の一部を分割金型1、1により挟持してピンチオフ部3を形成した後、パリソン6内に吹込みノズル5から加圧流体を導入することにより中空成形体8を形成する方法である。 - 特許庁
An elastic seal member 23 consisting of elastomer is united with the main body 22 of the first split body 21 consisting of nylon by insert molding, and also the elastic seal member 23 is equipped with an anti-come-off part 25 which is provided through the through hole 27 of the main body 22 of the above split body.例文帳に追加
ナイロンから成る第1割体21の分割体本体22には、エラストマーから成る弾性シール部材23がインサート成形により一体化されると共に、該弾性シール部材23が前記分割体本体22の貫通孔27を貫通して設けられた抜け止め部25を備えている。 - 特許庁
To provide a roller bearing with inner and outer rings of non-split type and retainer formed by an array of retainer segments, capable of preventing rollers and/or the retainer from slipping off at installing.例文帳に追加
内外輪が非分割形であって、保持器が保持器セグメントの配列によって構成された転がり軸受において、組み付け時にころや保持器が脱落する問題を解決することである。 - 特許庁
The inner side of the door of the freezing storage is installed with a slide type sheet cutting off the inside and the outside in time of the opening of the door, and the sheet is provided with a split curtain-equipped opening part necessary for put-in/out of a vessel.例文帳に追加
凍結庫の扉の内側に、扉の開放時に内部と外部とを遮蔽するスライド式シートを取付け、そのシートに容器の出し入れに必要なノレン付き開口部を設ける。 - 特許庁
(i) A business year within ten years prior to the merger prescribed in Article 66-8(3)(i) of the Act (hereinafter referred to as a "business year within ten years prior to the merger" in this paragraph and the next paragraph) of a merged corporation pertaining to a qualified merger or a business year within ten years prior to the company split prescribed in paragraph (3)(ii) of the said Article (hereinafter referred to as a "business year within ten years prior to the company split" through to paragraph (7)) of a split corporation pertaining to a qualified split-off-type company split (excluding a business year within ten years prior to the merger or business year within ten years prior to the company split listed in the next item): The relevant business year of the said domestic corporation including the first day of a business year within ten years prior to the merger of the said merged corporation or the relevant business year of the said domestic corporation including the first day of a business year within ten years prior to the company split of the said split corporation 例文帳に追加
一 適格合併に係る被合併法人の法第六十六条の八第三項第一号に規定する合併前十年内事業年度(以下この項及び次項において「合併前十年内事業年度」という。)又は適格分割型分割に係る分割法人の同条第三項第二号に規定する分割前十年内事業年度(以下第七項までにおいて「分割前十年内事業年度」という。)(次号に掲げる合併前十年内事業年度又は分割前十年内事業年度を除く。) 当該被合併法人の合併前十年内事業年度開始の日を含む当該内国法人の各事業年度又は当該分割法人の分割前十年内事業年度開始の日を含む当該内国法人の各事業年度 - 日本法令外国語訳データベースシステム
(i) The individually taxed amount of retained income: The amount obtained by multiplying respectively the individually taxed amount of retained income for a business year within ten years prior to the company split of a split corporation pertaining to a qualified split-off-type company split by the ratio of the shares, etc. for considering the claims held prescribed in Article 39-116(3)(i) (hereinafter referred to as the "shares, etc. for considering the claims held" in this Article) that are listed in (b) out of the shares, etc. for considering the claims held that are listed in (a): 例文帳に追加
一 個別課税済留保金額 適格分割型分割に係る分割法人の分割前十年内事業年度の個別課税済留保金額にイに掲げる第三十九条の百十六第三項第一号に規定する請求権勘案保有株式等(以下この条において「請求権勘案保有株式等」という。)のうちにロに掲げる請求権勘案保有株式等の占める割合をそれぞれ乗じて計算した金額 - 日本法令外国語訳データベースシステム
(i) A business year within ten years prior to the merger prescribed in Article 68-92(3)(i) of the Act (hereinafter referred to as a "business year within ten years prior to the merger" in this paragraph and the next paragraph) of a merged corporation pertaining to a qualified merger or a business year within ten years prior to the company split prescribed in paragraph (3)(ii) of the said Article (hereinafter referred to as a "business year within ten years prior to the company split" through to paragraph (7)) of a split corporation pertaining to a qualified split-off-type company split (excluding a business year within ten years prior to the merger or business year within ten years prior to the company split listed in the next item): The relevant consolidated business year of the said consolidated corporation including the first day of a business year within ten years prior to the merger of the said merged corporation or the relevant consolidated business year of the said consolidated corporation including the first day of a business year within ten years prior to the company split of the said split corporation 例文帳に追加
一 適格合併に係る被合併法人の法第六十八条の九十二第三項第一号に規定する合併前十年内事業年度(以下この項及び次項において「合併前十年内事業年度」という。)又は適格分割型分割に係る分割法人の同条第三項第二号に規定する分割前十年内事業年度(以下第七項までにおいて「分割前十年内事業年度」という。)(次号に掲げる合併前十年内事業年度又は分割前十年内事業年度を除く。) 当該被合併法人の合併前十年内事業年度開始の日を含む当該連結法人の各連結事業年度又は当該分割法人の分割前十年内事業年度開始の日を含む当該連結法人の各連結事業年度 - 日本法令外国語訳データベースシステム
A split ring retainer 50 is arranged under a condition where the key segment is installed once on the fixing position and the seal assembly is retained, and the key segment comes off from the groove 19 to prevent move in the axial direction.例文帳に追加
一度キーセグメントが固定位置に設置されて、シールアッセンブリが保持した状態において、分割リング保持器50が配置され、キーセグメントが溝19から外れて軸方向に移動しなくなる。 - 特許庁
To provide a laying method of a light shielding sheet with a thin-film solar battery which can lay the light shielding sheet with the thin-film solar battery on the ground surface in a manner resistant to peel and split-off even in a strong wind.例文帳に追加
薄膜太陽電池付き遮光シートを、強風が吹いても剥がれたり裂けたりしにくい形で地面上に敷設できる薄膜太陽電池付き遮光シートの敷設方法を提供する。 - 特許庁
To prevent the occurrence of dragging by sharply enhancing the slide properties of the locking part with a lower mold side piece and a center piece at the time of on-off of a center slide type split mold to enhance durability.例文帳に追加
センタースライド式の分割モールド金型の開閉時に、下型サイドピースとセンターピースとの係合部の摺動性を大幅に向上させてカジリの発生を防止し、耐久性を向上させる。 - 特許庁
These works were originally completed in the style of emakimono, but later split off into pieces of illustrated paper either to be fixed in frames for the preservation purpose or to be transferred or sold out to others. 例文帳に追加
これには、元来巻物だったものを保存上の観点から1紙ずつはがして額装にしたものと、分割して譲渡・売却するために、長い巻物を画面ごとに切断したものとがある。 - Wikipedia日英京都関連文書対訳コーパス
The peak amplifier can be pumped by an RF signal more efficiently than can be achieved using an equal power split, thus compensating for transconductance characteristics of a transistor close to threshold and increasing back-off capability for the same efficiency or improving linearity at the same back-off point.例文帳に追加
ピーク増幅器は、均等電力分割を用いて達成されえるよりも、より効率的にRF信号によって持ち上げられえ、よってスレッショルド近くにトランジスタのトランスコンダクタンス特性を補償し、同じ効率についてのバックオフ能力を増し、または同じバックオフ点における直線性を改善しえる。 - 特許庁
To provide an opening/closing door device having a door part split at least into an upper and a lower portion, capable of opening and closing any door portion without regard to falling-off of an object from the other door portion.例文帳に追加
少なくとも上下2部分に分割された扉部分を有する開閉扉装置について、他の扉部分からの物品の落下などを気に懸けることなく、任意の箇所の扉部分を開閉できるようにする。 - 特許庁
The photo detectors 11, 12 are provided with 4-split type light receiving elements a-d which have a space arranged in the center to surround the passage of the light, and moreover, to block off the peripheral part of parallel beams.例文帳に追加
光検出器11,12は、光の通過経路を取り囲むように、中央に空間を設けた状態で、しかも平行ビームの周辺部を遮るように設けられる4分割型の受光素子a〜dを備える。 - 特許庁
This gas chromatograph equipped with the PTV has the soft sample vessel 11 connected to a sample introducing port 27 of the PTV, and a suction pump 12 connected to a split flow passage 26 branching off from a sample vaporizing chamber 21.例文帳に追加
PTVを装備したガスクロマトグラフにおいて、PTVの試料導入口27に接続された軟質試料容器11と、試料気化室21から分岐するスプリット流路26に接続された吸引ポンプ12とを備える。 - 特許庁
To provide a well for passing water through a cut-off wall, which is constituted by making symmetrically constituted split containers coupled together for integral constitution by a water passage pipe with a valve, and an underground water treatment mechanism which is disposed in the cut-off wall, wherein the wells are installed on upstream and downstream sides of a structure, and utilized effectively for collecting and pouring underground water.例文帳に追加
対称的に構成する分割容器をバルブ付通水管で結合して一体に構成して成る止水壁通水井戸とこれを構造物の上下流側に設置した止水壁に配備し、地下水の集水、注水用として有効に活用する地下水処理機構を提供する。 - 特許庁
To prevent the ceramic substrate 1 from causing mal-division, when the dummy part 2 is split off, for example, occurrence of burrs, and inhibit the occurrence of defectives, for example, cracking or breakage at the step of the ceramic substrate production and the step of the electronic part produc tion.例文帳に追加
セラミックス基板1において、ダミー部2を分割するときにバリの発生などの分割不良を発生させることなく、更に、セラミックス基板製造工程並びに電子部品製造工程に於いて、クラックや割れの不良の発生を防止する。 - 特許庁
By irradiating the electron beam of the suitable dosage to the surface of a substrate made of thermoplastic resin, an affix on the substrate surface is split off and a rigid surface-treatment layer which has a structure of cross linkage in the thermoplastic resin is formed simultaneously.例文帳に追加
熱可塑性樹脂製基板の表面に適当な線量の電子線を照射することにより、基板表面にある付着物を分解除去し、同時に、熱可塑性樹脂に架橋構造を有する剛直な表面改質層を形成する。 - 特許庁
Shojin ryori of Daitoku-ji Temple, Kyoto, are examples of the former, and those of Hida Takayama are examples of the latter and both have created artistic dishes which are different from those of temples by reintroducing the technique of Kaiseki ryori (tea-ceremony dishes) that had been split off. 例文帳に追加
京都大徳寺の精進料理は前者、飛騨高山の精進料理は後者の典型的なケースであり、いずれも分離していった懐石料理の手法を再び取り入れたりして、寺院のそれとはやや異なる風雅なものを生み出している。 - Wikipedia日英京都関連文書対訳コーパス
| 意味 | 例文 |
| ※この記事は「日本法令外国語訳データベースシステム」の2010年9月現在の情報を転載しております。 |
| Copyright © Japan Patent office. All Rights Reserved. |
| 本サービスで使用している「Wikipedia日英京都関連文書対訳コーパス」はWikipediaの日本語文を独立行政法人情報通信研究機構が英訳したものを、Creative Comons Attribution-Share-Alike License 3.0による利用許諾のもと使用しております。詳細はhttp://creativecommons.org/licenses/by-sa/3.0/ および http://alaginrc.nict.go.jp/WikiCorpus/ をご覧下さい。 |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|
