| 例文 |
disk commandの部分一致の例文一覧と使い方
該当件数 : 424件
The repquota(8) command can be used to get a summary of all quotas and disk usage for file systems with quotas enabled. 例文帳に追加
repquota(8)コマンドを使うと、クォータが有効になっているファイルシステム用の全てのクォータやディスク容量のサマリを得ることができます。 - FreeBSD
To correct a read error without using an alternative sector processing command in an inexpensive mirror disk apparatus such as an ATA specification.例文帳に追加
ATA仕様のような安価なミラーディスク装置において代替セクター処理コマンドを用いることなくリードエラーを修復する。 - 特許庁
An HDD reads out data at an address designated by the read command from a magnetic disk and transfers the read-out data to the host.例文帳に追加
HDDは、リード・コマンドが指定するアドレスのデータを磁気ディスクから読み出し、その読み出したデータをホストに転送する。 - 特許庁
To provide a recording device to record data in a disk scheduling without needing any special command from a host device side.例文帳に追加
ホスト装置側からの特別なコマンドを必要とせず、記録装置側においてデータをディスク媒体にディスクスケジューリング記録する。 - 特許庁
Similarly, the physical position of a disk is calculated from the logical address data of the write command by using an address logical/physical converting means 33 and a disk transfer speed corresponding to the position is estimated by a disk transfer speed calculating means 34.例文帳に追加
同様に、アドレス論理物理変換手段33を使用してライトコマンドの論理アドレスデータからディスクの物理位置を算出し、その位置に対応したディスク転送速度をディスク転送速度算出手段34で見積もる。 - 特許庁
A disk control device 20 issues a SCSI command 3 requesting all the detailed disk information 2 about the HDDs 70a1 to 70an, when connected to the disk enclosure 60 via a dedicated SCSI cable 4.例文帳に追加
ディスク制御装置20は、自身と、ディスクエンクロージャ60とが専用のSCSIケーブル4で接続されると、各HDD70a1〜HDD70anのディスク詳細情報2を一括で要求するSCSIコマンド3を発行する。 - 特許庁
When discrimination is made to determine that a PTT switch has been operated (a step 101), a beep sound is generated (a step 102) and a command to start rotating the disk is outputted to a disk driver (a step 103).例文帳に追加
PTTスイッチが操作されたことを判定(ステップ101)すると、ビープ音を発生させ(ステップ102)、ディスクの回転を開始させる指令をディスクドライバに出力する(ステップ103)。 - 特許庁
The data reproduction system comprises a television set 1, an optical disk device 2, and an HDMI for transmitting and receiving video data and a CEC command between the television set 1 and the optical disk device 2.例文帳に追加
テレビジョン装置1、光ディスク装置2、及びテレビジョン装置1と光ディスク装置2との間で映像データ及びCECコマンドを送受信するためのHDMIを備える。 - 特許庁
When a disk 12 is loaded to an optical disk device, start processing is performed by a microcomputer of a system control, initially, a command of spindle-motor-ON is sent to a DSP 34 from the microcomputer.例文帳に追加
光ディスク装置にディスク12が装着されるとシステムコントロールのマイコンによって起動処理がなされ、最初にマイコンからDSP34にスピンドルモータONのコマンドが送られる。 - 特許庁
The flat processing circuit 8 receives this command to rewrite a flag in the memory 9 to '1', or rewrites the flat to '0' when the circuit 8 detects that the disk is unloaded from the disk driver 1 after that.例文帳に追加
フラグ処理回路8は、該指令を受けてメモリ9内のフラグを1に書き換え、その後、ディスクドライブ装置1からディスクが抜き取られたことを検出したとき、フラグを0に書き換える。 - 特許庁
When the speed of revolution of the optical disk 10 reaches the objective speed, the optical disk 10 stopps the delay of the seek operation, and when the read command is issued, shifts to the seek operation of the optical pickup 12.例文帳に追加
光ディスク10は目標回転数に達した時点で、シーク動作の遅延を止め、リードコマンドが発行された場合に直ちに光ピックアップ12のシーク動作に移行する。 - 特許庁
An ATA I/F control part 11 of this hard disk unit holds the command data inputted through an ATA I/F cable 100 to a task register 12, and reads in a user area setting value held to the task register 12 when the command is a capacity setting command.例文帳に追加
ATA I/F制御部11はATA I/Fケーブル100を介して入力されるコマンドデータをタスクレジスタ12に保持し、そのコマンドが容量設定コマンドであれば、タスクレジスタ12に保持されているユーザ領域設定値を読込む。 - 特許庁
When it has been judged that the traction coefficient μ is approximately equal to the maximum value μmax, the pinch pressure control command calculating section 84 outputs a pinch pressure control command to a pressure control valve 54 to the input disk and the output disk in order to increase a pushing force Fa.例文帳に追加
トラクション係数μが最大値μmax近傍にあると判定された場合、挟圧制御指令値算出部84は、入出力ディスク押圧力Faを増大させるための挟圧制御指令値を圧力制御弁54へ出力する。 - 特許庁
The storage device, its controller and its data storage control method sequentially write the write command (1) data and the write command (2) data temporarily stored in the buffer memory on the magnetic disk from the time receiving the write command (4) which is the received command after detecting the vibrations until a certain time passes.例文帳に追加
本発明の記憶装置用制御装置、記憶装置およびそのデータ記憶制御方法は、既にバッファメモリに一時記憶されているライトコマンド(1)データ、ライトコマンド(2)データを、振動を検出してから受領したライトコマンドであるライトコマンド(4)受領から一定時間が経過するまで、順次磁気ディスクへ書き込む。 - 特許庁
A command determination unit 101 to determine whether or not a received control command is executable, and a logical format inspection unit 102 to inspect whether or not the logical format of the disk is defective are provided, and the command is executed only when the command is executable, and the logical format is not defective.例文帳に追加
受信した制御コマンドが実行可能な状態にあるか否かを判定するコマンド判定部101と、ディスクの論理フォーマットに欠陥があるか否かを検査する論理フォーマット検査部102とを備えており、コマンドが実行可能状態にあり、かつ論理フォーマットに欠陥がない場合にのみコマンドが実行される。 - 特許庁
Whether a writing data size of a command input from a host is smaller than a physical sector of a magnetic disk is determined (step S10) and priority of the command is lowered when the size is smaller than the physical sector (step S12).例文帳に追加
ホストから入力されるコマンドの書き込みデータのサイズが、磁気ディスクの物理セクタよりも小さいか否かを判断し(ステップS10)、小さい場合にそのコマンドの優先順位を下げておく(ステップS12)。 - 特許庁
To provide a switching device, a switch control method, and a storage system, which automatically set the minimum value of the number of command queuing in storages that make up virtual disks to the number of command queuing in the virtual disk.例文帳に追加
各仮想ディスクを構成している記憶装置のコマンドキューイング数の最小値を、該仮想ディスクのコマンドキューイング数に自動的に設定するスイッチ装置、スイッチ制御方法、及びストレージシステムを提供する。 - 特許庁
A GDI 11 of an OS 1 stores the print data in a spooler 12 in a command form, the spooler 12 manages received plotting command data by storing it in a disk device 13 and outputs it to a driver 3.例文帳に追加
OS1のGDI11は印刷データをコマンド形式でスプーラ12へ蓄積し、スプーラ12は受取った描画コマンドデータをディスク装置13に蓄積して管理し、ドライバ3へ出力する。 - 特許庁
The host 1 sends an access command 19 including target information designating a target volume 11T to the disk array device 3 as an access command for an actuation volume 11K other than the volume 11T.例文帳に追加
ホスト1は、ターゲットボリューム11Tを指すターゲット情報を含んだアクセスコマンド19を、そのボリューム11Tとは別の起動ボリューム11Kに対するアクセスコマンドとしてディスクアレイ装置3に送信する。 - 特許庁
The SAN control board accesses data stored in a disk device by the I/O command by the block received from the SAN and the I/O command by the block received from the NAS control board.例文帳に追加
SAN制御ボードは、SANから受け付けたブロック単位のI/Oコマンドと、NAS制御ボードから受信したブロック単位のI/Oコマンドとによりディスク装置に記憶されたデータをアクセスする。 - 特許庁
In another method, the host sometimes first provides the device for recording/reproducing the data to/from the optical disk with the write command and the information about the defective area is returned in response to the write command.例文帳に追加
別の方法として、ホストが光ディスクに/からデータを記録/再生するデバイスに最初に書き込みコマンドを提供し、それに対して欠陥領域に関する情報が返される場合もある。 - 特許庁
In a disk controller, a hang-up detecting and interruption circuit 201 is provided which has a timer 201b actuated at the start of the execution of a command from a host and stopped at the end of the execution of the command.例文帳に追加
ディスクコントローラ内に、ホストからのコマンドの実行開始時に起動して当該コマンドの実行終了時に停止するタイマ201bを持つハングアップ検出・割り込み回路201を設ける。 - 特許庁
In the case that the response can not be received from the magnetic disk device of the transmission destination of the command, the host device 10 changes the combination of the FC-AL loop for transmitting the command and the FC-AL loop to transmit the response and retransmits the command (steps S103 and S105).例文帳に追加
ホスト装置10は、コマンドの送信先の磁気ディスク装置から応答が受信できなかった場合、コマンドを送信するFC−ALループと、応答を送信すべきFC−ALループとの組み合わせを変更してコマンドの再送を行う(ステップS103、S105)。 - 特許庁
In this disk array system 10, a cache memory 16 for temporal storage of data that is subjected to disk access and a freeze setting part 173 which is provided in a controlling part 17 and fixes data in an area with a designated disk area including a backup object disk area, e.g. a disk array 11 as write stop in response to a freeze command from a host device 20.例文帳に追加
ディスクアレイシステム10において、ディスクアクセスされるデータの一時記憶用のキャッシュメモリ16と、制御部17に設けられ、ホスト装置20からのフリーズコマンドに応じて、バックアップ対象ディスク領域を含む指定のディスク領域、例えばディスクアレイ11を書き込み停止として、その領域内のデータを固定するフリーズ設定部173とを備える。 - 特許庁
The disk array controller includes a data pattern identifying logic unit 30 for identifying a write data pattern from the host computer and read data patterns, from the cache memory and the disk unit, a command generator 31 for commanding, based on the data pattern identified by the data pattern identifying logic unit 30, and a command analyzer 32 for analyzing the command, to generate an original data pattern.例文帳に追加
ホストコンピュータからの書き込みデータのパターン、およびキャッシュメモリ部とディスク装置からの読み出しデータのパターンを識別するデータパターン識別論理部30と、データパターン識別論理部30により識別されたデータパターンに基づいてコマンド化するコマンド生成部31と、コマンドを解析し、元のデータパターンを生成するコマンド解析部32とを備えた。 - 特許庁
Also, a command to release the data at the disk position Z is intercepted, and a mark indicating that the disk position Z stores the history data is set in the recording of the historic state.例文帳に追加
また、この方法は、ディスク位置Zにあるデータを解放するコマンドをインターセプトし、履歴状態の記録内に、ディスク位置Zが履歴データを格納することを示す標識を設定することを含む。 - 特許庁
To provide a RAID and a computer system provided therewith capable of acquiring a SMART attribute value for every disk constituting a virtual disk by using a command specified by a standard interface.例文帳に追加
標準インタフェースで規定されているコマンドを使用して、仮想ディスクを構成するディスク毎のSMART属性値を取得すことが可能なRAID、及びこれを備えるコンピュータシステムを提供することを目的とする。 - 特許庁
When acquiring a write command to write data in a specific area on the optical disk PD from a host device, the optical disk drive writes the data in the memory 14 and notifies the host device of write completion.例文帳に追加
そして、光ディスクPD上の特定の領域にデータを書き込む書き込みコマンドをホスト装置から取得したとき、そのデータをメモリ14に書き込むと共に、ホスト装置に書き込み完了通知を返す。 - 特許庁
A disk enclosure 60 issues a SCSI command 1 to HDDs 70a1 to 70an and acquires and stores detailed disk information 2 about the HDDs 70a1 to 70an.例文帳に追加
ディスクエンクロージャ60は、HDD70a1〜HDD70anに対してSCSIコマンド1を発行し、各HDD70a1〜HDD70anのディスク詳細情報2を取得して記憶しておく。 - 特許庁
A queue number setting unit 14 sets the selected minimum queue number as the command queuing number of the virtual disk, that includes the storage device of which the minimum queue number is selected, for each virtual disk.例文帳に追加
キュー数設定部14は、選択された最小キュー数を、当該最小キュー数が選択された記憶装置が構成する仮想ディスクのコマンドキューイング数として仮想ディスク毎に設定する。 - 特許庁
Disabling a builtin allows a disk command which has the same name as a shell builtin to be executed without specifying a full pathname, even though the shell normally searches for builtins before disk commands. 例文帳に追加
シェルは通常はディスクコマンドの前に組み込みコマンドを探しますが、組み込みコマンドを無効にすると、シェルの組み込みコマンドと同じ名前を持つディスクコマンドを、完全なパス名を指定しなくても実行できます。 - JM
The storage subsystem includes: a storage device including a hard disk drive; and a controller which controls access to the hard disk drive in response to a prescribed access command transmitted from a host computer.例文帳に追加
本発明は、ハードディスクドライブを含むストレージデバイスと、ホストコンピュータから送信される所定のアクセスコマンドに応答して、ハードディスクドライブに対するアクセスを制御するコントローラとを備えるストレージサブシステムである。 - 特許庁
As the disk drive receives learning opportunity and the learning performable time by the command issued from the disk recording and playback apparatus, performable learning processing is performed within the learning processing performable time.例文帳に追加
ディスクドライブは、ディスク記録再生装置から発行されたコマンドにより、学習契機および学習可能時間を受信するので、学習処理実行可能時間内で実行可能な学習処理を行う。 - 特許庁
A storage manager 12 reads the data or information from the optical disk 36 or the HDD 34 according to a command in a normal mode, restricts reading from the optical disk 36 according to a command in an escape/reload mode, and controls reading so that the data or information is read from the HDD 34.例文帳に追加
ストレージマネージャ12は、通常モードのコマンドに応じて、光ディスク36またはHDD34からデータまたは情報を読み出し、エスケープリロードモードのコマンドに応じて、光ディスク36からの読み出しを抑制するとともに、HDD34からデータまたは情報を読み出すように、読み出しを制御する。 - 特許庁
After storing the address information of the area to be erased in the table 300, the control processor (MPU) 4 applies setting of command termination report to a magnetic disk control unit (HDC) 5, and carries out the termination report of the erase command to the host 1 from the magnetic disk control unit (HDC) 5 (step 204).例文帳に追加
消去すべき領域のアドレス情報をテーブル300に格納した後、制御プロセッサ(MPU)4は、磁気ディスク制御装置(HDC)5に命令終了報告の設定を施し、磁気ディスク制御装置(HDC)5からホスト1に対して消去命令の終了報告を行う(ステップ204)。 - 特許庁
A control part 22 issues by banks READ command for reading data recorded on a hard disk 30 out to one bank of a buffer memory 15 and a WRITE command for wiring data to the hard disk 30 by reading the data read out to the one bank, so that the data are rerecorded.例文帳に追加
ハードディスク30に記録されているデータをバッファメモリ15の1つのバンクに読み出すREADコマンド、および1つのバンクに読み出されたデータを用いてハードディスク30へのデータの書き込みを行うWRITEコマンドをバンク毎に制御部22から発行して、データの再記録処理を行う。 - 特許庁
A RAID controller 4 is arranged which issues a read and a write command, etc., to parallel-connected disk devices 5 at an I/O request from a host device and checks whether or not a fault possibly occurs in the disk devices 5 according to the operations of the disk devices 5 responding to the read-in command, etc.例文帳に追加
ホスト装置からのI/Oリクエストに応じて並列に接続された複数のディスク装置5に対して読込みや書込み等の指令を発するとともに、この読込み等の指令に対するディスク装置5の動作に基づいて前記ディスク装置5に障害が発生しそうか否かをチェックするRAID制御装置4を配設したことを特徴とする。 - 特許庁
Thus, the response to an input output command is improved and a disk storage device, in which access performance is improved, is realized.例文帳に追加
これによって、入出力命令に対するレスポンスの改善を図ることができ、アクセス性能の向上したディスク記憶装置が実現できる。 - 特許庁
When instructing power off to the power supply control part 50, a head retracting command is outputted from the sub CPU 20 to the hard disk drive 36.例文帳に追加
次に、電源制御部50に電源切断を指示する場合に、サブCPU20からハードディスクドライブ36にヘッド退避コマンドを出力する。 - 特許庁
When the operation status of the portable storage device is "loading completion", a disk controller 41 is normally driven by a command from a master device.例文帳に追加
可搬型記憶装置は、動作ステータスが「ローディング完了」の場合は、上位装置からのコマンドに対してディスクコントローラ41に通常動作をさせる。 - 特許庁
To provide a magnetic disk device in which nonvolatile memories can be used effectively even in a host system in which a command is not supported.例文帳に追加
コマンドをサポートしていないホストシステムでも不揮発性メモリを有効に使用することができる磁気ディスク装置を提供することを目的とする。 - 特許庁
A minimum queue number selecting unit 13 selects the minimum value of the command queuing numbers of the storages that make up the virtual disk as a minimum queue number.例文帳に追加
最小キュー数選択部13は、仮想ディスクを構成するストレージのコマンドキューイング数の最小値を最小キュー数として選択する。 - 特許庁
By receiving this command designating a transfer rate, the recording system for writing data on a disk D can be automatically switched.例文帳に追加
前記転送レートが指定されたコマンドを受け取ることにより、ディスクDにデータを書き込む際の記録方式を自動的に切り替えることができる。 - 特許庁
A special read/write mechanism 4 exchanges the data with the magnetic disk device 2 by using a read long/write long command.例文帳に追加
特殊リード/ライト機構4は、磁気ディスク装置2とのデータのやり取りをRead Long/Write Longコマンドを用いて行う。 - 特許庁
Then, a program file and an image data file are read from an optical disk (S30b), and an initialization command is transmitted to an image management section (S30c).例文帳に追加
次に、プログラムファイルおよびイメージデータファイルを、光ディスクから読み出し(S30b)、イメージ管理部に対し、初期化コマンドを送信する(S30c)。 - 特許庁
The first and second format formations are selected on the basis of a switch for mode selection, or the initialization command of a disk recording state from a host.例文帳に追加
モード選択用のスイッチ又はホストからのディスク記録状態の初期化コマンドに基づいて、第1と第2のフォーマット形成を選択すること。 - 特許庁
Normally file systems that the user is not using any disk space on will not show up in the output from the quota(1) command, even if he has a quota limit assigned for that file system. 例文帳に追加
通常、そのユーザが全く使っていないファイルシステムは、クォータリミットが付けられているとしても quota(1) コマンドの出力には現われません。 - FreeBSD
This particular disk is configured to house seven Linux filesystems (each with a corresponding partition listed as "Linux") as well as a swap partition(listed as "Linux swap").例文帳に追加
Command (m for help): このディスクの例では7つのLinuxファイルシステム("Linux"と表示されている)とスワップパーティション("Linux swap"と表示)で構成するように設定されています。 - Gentoo Linux
| 例文 |
| Copyright © Japan Patent office. All Rights Reserved. |
| この対訳コーパスは独立行政法人情報通信研究機構の研究成果であり、Creative Commons Attribution-Share Alike 3.0 Unportedでライセンスされています。 |
| Copyright 1994-2010 The FreeBSD Project. All rights reserved. license |
| Copyright 2001-2010 Gentoo Foundation, Inc. The contents of this document are licensed under the Creative Commons - Attribution / Share Alike license. |
| Copyright (c) 2001 Robert Kiesling. Copyright (c) 2002, 2003 David Merrill. The contents of this document are licensed under the GNU Free Documentation License. Copyright (C) 1999 JM Project All rights reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|