| 例文 |
timer interruptionの部分一致の例文一覧と使い方
該当件数 : 254件
Also, by resetting the ball putting out setting permission flag 213g by timer interruption generated after the lapse of prescribed time from the main power supply, a period during which the setting change of the ball putting out rate is possible is limited to the time of power supply.例文帳に追加
また、主電源の投入時から所定時間経過後に発生するタイマ割込で出玉設定許可フラグ213gをリセットすることで、出玉率の設定変更ができる期間を電源投入時期に制限する。 - 特許庁
A microprocessor 1 stores on/off states of switches S1 to Sn in a switch state storage buffer 6 whenever an interruption signal is inputted from an OR circuit 3 and starts a timer 5 when the switches S1 to Sn are released.例文帳に追加
マイクロプロセッサ1は、OR回路3から割り込み信号が入力される度に、スイッチS1〜Snのオン/オフ状態を、スイッチ状態記憶バッファ6に記憶し、スイッチS1〜Snが離されると、タイマ5をスタートさせる。 - 特許庁
Accordingly, as the timer interruption processing is preferentially executed even if the read-ahead processing is being executed in the main processing, the jackpot lottery can be executed without delay at the timing when the variable display presentation is started.例文帳に追加
これにより、先読み処理がメイン処理において実行中であっても、タイマ割込処理が優先して実行されるので、変動演出の実行開始タイミングで大当たり抽選を遅滞なく行うことができる。 - 特許庁
A microcomputer 560 for game control with a built-in random number circuit 503 executes random number circuit setting processing for initializing the random number circuit 503 before executing timer interruption setting processing when executing main processing.例文帳に追加
乱数回路503を内蔵する遊技制御用マイクロコンピュータ560は、メイン処理の実行時に、タイマ割込設定処理を実行する前に乱数回路503を初期設定する乱数回路設定処理を実行する。 - 特許庁
If the preparative processing is determined not to be completed by the start of the communication, the communication standing on timer interruption, such as periodical processing 12, communication preparative processing incidental thereon, and communication postprocessing are skipped.例文帳に追加
そして、通信の開始までに通信準備処理が完了されないと判定された場合、周期処理12のように、タイマ割り込みによる通信と、それに付随する通信準備処理、および通信後処理がスキップされる。 - 特許庁
Furthermore, in the case that the preheating is not conducted for 40 sec or over, it is discriminated that further preheating is required, and an initial value of 10 min is set to the interruption timer and succeeding preheating is conducted for 67 sec or over with a preheating power of 67% or over.例文帳に追加
また、予熱が40秒以上でなかった場合、更に予熱の必要有りとして中断タイマの初期値に10分をセットし、次回の予熱を67秒以上かつ予熱電力値67%以上で行う。 - 特許庁
When a timer interruption occurs during the execution of a process performed in a normal cyclic, a CPU unit interrupts the process and transmits synchronization data by collective addressing using the system bus to other synchronization units performing the synchronization control.例文帳に追加
CPUユニットは、通常のサイクリックに行う処理実行中にタイマ割り込みが入ると、その処理を中断し、同期制御を行う他の同期ユニットに対してシステムバスを用いて同期データを一斉同報で送信する。 - 特許庁
The timer interruption processing includes permission processing (ST38) which permits the reception of the other interruption which has been inhibited until a time after all pieces of the processing are substantially completed, and the voltage lowering interruption processing includes level determination processing (ST40) which determines a level of the failure signal ALM, and performs the retreat processing of registers of a CPU under a condition that the determined level indicates an failure value of the monitor voltage.例文帳に追加
タイマ割込み処理には、実質的に全ての処理が完了してから、それまで禁止されていた他の割込みの受付けを許可する許可処理(ST38)を備え、電圧降下割込み処理には、異常信号ALMのレベルを判定して、それが監視電圧の異常値を示すレベルであることを条件に、CPUのレジスタ類の退避処理を実行させるレベル判定処理(ST40)を備える。 - 特許庁
A drive trigger 42, i.e., the rising edge of an output pulse from the timer 7b of a CPU 7, is delivered to a head drive circuit 16 in a print ASIC 9, a head data processing circuit 17, and an interruption request control circuit 18.例文帳に追加
CPU7のタイマ7bの出力パルスの立上がりエッジによる駆動トリガ42は、印字用ASIC9内のヘッド駆動回路16と、ヘッドデータ処理回路17と、割り込み要求制御回路18に入力される。 - 特許庁
Upon the receipt of an interruption notice from the control section 12 after that, when the timer is started, the application section 16 regards the call to be an illegal arriving call, stores its caller number to a memory and does not register the caller number to the call arrival history.例文帳に追加
その後、アプリケーション部16は、制御部12からの切断通知を受けたとき、タイマが起動中であれば、不正着信と見なしメモリに発番号を記憶すると共に着信履歴に発番号の登録を行わない。 - 特許庁
To hold a system time within a prescribed error against an external time without depending on the time of an external clock, or destroying a relation between interruption from an interval timer and a time updating time regardless of an elapsed time from the correction.例文帳に追加
外部時計の刻みに依存することなく、また補正からの経過時間によらずに、インターバルタイマからの割込みと時刻更新時間との関係を崩すことなく、システム時刻を外部時刻に対して所定の誤差内に保つ。 - 特許庁
A degradation calculating part 125, if an interruption signal INT is issued from a timer 124, calculates a degree of battery degradation based on a temperature data and a total electric quantity calculated by integration of current data for a prescribed period.例文帳に追加
タイマ124から割込み信号INTが発せられた場合、劣化演算部125が、温度データと電流データの所定期間における積算により算出した総電気量とに応じて電池劣化度合いを算出する。 - 特許庁
In the case that a large current larger than the second overcurrent reference value flows in first prescribed time by a 1 msec timer circuit, an FET QA with a built-in temperature sensor is immediately OFF-controlled by overcurrent interruption control.例文帳に追加
1msecタイマ回路による第1所定時間において第2過電流基準値より大きい大電流が流れた場合は過電流遮断制御によって即時に温度センサ内蔵FET・QAをオフ制御する。 - 特許庁
To provide a device in a water use section provided with a water dischrge mean and a valve means which is arranged between a water feeding means and the water discharhge means and the motion of which is controlled by a timer, of which the actuation does not stop even during interruption of power supply.例文帳に追加
吐水手段と、給水手段と吐水手段との間に配設されタイマーによって作動が制御されるバルブ手段とを備える水廻り装置であって、停電時でも作動が停止しない水回り装置を提供する。 - 特許庁
When the communication circuit 114 detects the communication request, or the reset timer 120 or peripheral circuit 109 is triggered, a signal is transmitted from the interruption detecting circuit 108 to the automatic reset circuit 105 to return the computer from the hibernation.例文帳に追加
通信要求を通信回路114が検知すれば、又は復帰タイマ120や周辺回路109からトリガが有れば、割込検知回路108から自動復帰回路105へ信号を送り、ハイバネーションから復帰する。 - 特許庁
That is, when an operation section 9 selects the transition to the low voltage mode, count of a power interruption timer is stopped, the mobile terminal shifts to the low voltage mode and the control section 2 controls the limitation of the power supply destinations and the supply mount.例文帳に追加
すなわち、操作部9によって、低電圧モードへの移行が選択された場合は、電源切断タイマのカウントを停止し、低電圧モードへ移行し、電力の供給先や供給量を制限する制御を行う。 - 特許庁
Before the setting of a timer interruption, the initialization of a random number circuit 503 is carried out and the initial value to be inputted into a counter 521 is altered to the value based on the proper ID number applied per microcomputer 560 for game control.例文帳に追加
タイマ割込の設定がなされる前に乱数回路503を初期設定し、カウンタ521に入力する初期値を遊技制御用マイクロコンピュータ560毎に付与された固有のIDナンバにもとづく値に変更させる。 - 特許庁
An A/D conversion start signal circuit 100A, that receives an interruption signal from a timer 200 generates a signal representing start of A/D conversion and gives the signal to an A/D conversion clock generating circuit 100B and an analog/digital converter circuit 300.例文帳に追加
タイム200からの割り込み信号を受けて、AD変換開始信号回路100Aは、AD変換開始の信号を発し、AD変換クロック発生回路100BとAD変換回路300に入力する。 - 特許庁
The power supply command 1 written to the transmission buffer is transmitted to a display control board byte by byte by timer interruption processing, and the initial image is displayed on an LCD display by the display control board which receives the command.例文帳に追加
送信バッファへ書き込まれた電源投入コマンド1はタイマ割込処理によって1バイトずつ表示用制御基板へ送信され、そのコマンドを受信した表示用制御基板によって、LCDディスプレイに初期画面が表示される。 - 特許庁
In the low-power operation mode, the main power supply control part 10 when detecting an activation request from outside makes a timer part 14 start counting operation while restarting supplying the electric power to the respective parts in the main power supply area A1, and when the timer part 14 counts up to a return time, an interruption signal is sent to the control part 2 to restart its operation.例文帳に追加
低電力動作モードにおいて、主電源制御部10が外部からの起動要求を検出すると、主電源部11に主電源領域A1の各部への電源供給を再開すると同時に、タイマー部14にカウント動作を開始させ、タイマー部14が復帰時間をカウントすると、制御部2に割込み信号を発生して動作を再開させる。 - 特許庁
In an ECU 10, when transmission data to an EEPROM 16 is stored in the communication buffer of a RAM 23, a microcomputer 20 confirms its contents to execute communication to the EEPROM 16 by timer interruption or communication completion interruption depending on the state of communication with a KCS-IC 14 and an A/F-ICI 15.例文帳に追加
ECU10ではマイクロコンピュータ20によりEEPROM16に対する送信データがRAM23の通信用バッファに蓄えられているときにはその内容が確認され、KCS−IC14、A/F−IC15との通信状態によりタイマ割込、または通信完了割込によってEEPROM16への通信が実行される。 - 特許庁
And when an interruption signal is outputted from the timer 17, the CPU 12 gives an instruction to stop the present write-in processing of data to the non-volatile memory 16 to a data transfer control circuit 15 which stops write-in processing of data.例文帳に追加
そして、タイマー17から割り込み信号が出力された場合、CPU12は、現在進行中の不揮発性メモリ16へのデータの書き込み処理を中止する命令をデータ転送制御回路15に与えてデータの書き込み処理を中止する。 - 特許庁
A timer 51 of the remote controller 2 is used for determining whether or not the time reaches a time indicated in the time setting information, the remote controller 2 transmits an interruption signal to the electronic apparatus 1 at the arrival of the time setting information to set the microprocessor 20 of the electronic apparatus 1 to a power-saving mode.例文帳に追加
リモートコントローラ2のタイマ51で時刻設定時間に達したかどうかを判断し、時刻設定時間になったら、電子機器1に割り込み信号を送り、電子機器1のマイクロプロセッサ20を省電力モードに設定する。 - 特許庁
When an operation for defocusing is performed, all icons are displayed without being focused (step S107) and after the lapse of a predetermined time (step S108, "timer interruption" in step S105), a new arrival mail notification icon is focused and displayed (step S110).例文帳に追加
そのフォーカスを消去する操作がされると、いずれのアイコンにもフォーカスを当てずに表示させ(ステップS107)、所定時間経過後に(ステップS108、ステップS105の「タイマ割り込み」)、新着メール報知アイコンにフォーカスを当てて表示させる(ステップS110)。 - 特許庁
In variation processing executed before start winning processing during one timer interruption processing, when draw (winning/losing determination) processing is performed while a Pachinko game machine 10 is under probability variation, an under-probability-variation winning/losing determination execution flag 203c is turned on.例文帳に追加
1のタイマ割込処理の中で始動入賞処理より先に実行される変動処理において、パチンコ機10が確変中であるもとで抽選(当否判定)処理が行われると、確変中当否判定実行フラグ203cがオンされる。 - 特許庁
A performance control part 51 for executing a performance operation on the basis of a control command CMD received from a main control part 50 is constituted to have main processing to be started when a CPU is reset, timer interruption processing of advancing the performance operation at fixed intervals, and reception interruption processing to be activated when the control command CMD is transmitted from the main control part 50.例文帳に追加
主制御部50から受けた制御コマンドCMDに基づいて演出動作を実行する演出制御部51は、CPUがリセットされると開始されるメイン処理と、演出動作を定時的に進行させるタイマ割込み処理と、制御コマンドCMDが主制御部50から送信されるときに起動される受信割込み処理と、を有して構成される。 - 特許庁
Time synchronization is executed by the interruption processing so that the preliminarily stored set value is set to the timer counter only by receiving the leading of a frame, and to shorten a time required for time synchronization processing only for a time required for the reading processing of the frame.例文帳に追加
このように割り込み処理によって時刻同期を行うため、フレームの先頭を受信しただけで予め記憶しておいた設定値をタイマカウンタにセットすることができ、フレームの読み取り処理にかかる時間分だけ時刻同期処理にかかる時間を短縮できる。 - 特許庁
The signal control part switches the normal mode to the emergency mode to switch traffic light for the lane of the emergency automobile to blue and switch that for the other lanes to red at input of the interruption signal though ordinarily performing control in the normal mode of cyclically switching traffic light to red, blue, and yellow by a timer.例文帳に追加
信号制御部は、普段の制御はタイマーで赤、青、黄の灯火を交互に切り替える通常モードで行われているが、割込み信号が入ると緊急モードに切り替わり、緊急自動車の車線を青、その他の車線を赤色に切り替える。 - 特許庁
In the battery system, the current interrupting circuit 4 switches the relay 2 from ON to OFF when the fuse 8 is fused in delay time of the timer part 24 and delay time elapses while an overcurrent larger than maximum interruption current of the relay 2 flows to the battery 1.例文帳に追加
バッテリシステムは、電池1にリレー2の最大遮断電流よりも大きな過電流が流れる状態において、タイマ部24の遅延時間内ではヒューズ8が溶断され、遅延時間が経過したタイミングでは電流遮断回路4がリレー2をオンからオフに切り換える。 - 特許庁
When timer interruption is generated, digital composite equipment obtains the display time of display language displayed at an LCD at present, and obtains a preliminarily specified 'display language switching time', and checks whether or not a 'present language display time' is not less than the 'display language switching time'.例文帳に追加
デジタル複合機は、タイマ割込が入ると、現在LCDに表示している表示言語の表示時間の取得を行い、予め規定されている「表示言語切替時間」を取得して、「現在の言語の表示時間」≧「表示言語切替時間」であるかチェックする。 - 特許庁
Temperature level of a device 3 in an amplifier 2 is detected constantly by a temperature sensor 4, and the temperature of the device 3 is transmitted to a section 7 for determining a temperature level difference in a control unit 5 at a predetermined timing by using a periodic timer signal or an interruption signal as a trigger.例文帳に追加
増幅器2のデバイス3の温度レベルは温度センサ4によって常時検出され、デバイス3の温度は周期的なタイマ信号又は割込み信号をトリガとして、所定のタイミングで制御ユニット5の温度レベル差判定部7へ送信される。 - 特許庁
At every interruption for the portion of number of interruptions WN1 to WNn which are set in an output timer, display lamp outputting data TD1 to TDn is outputted through an output port for an outputting period of time which is designated by output time data HD1 to HDn.例文帳に追加
出力タイマにセットされた割り込み回数WN1〜WNn分の割り込みごとに、表示灯出力データTD1〜TDnを出力時間データHD1〜HDnで指定される出力時間だけ出力ポートを介して出力する。 - 特許庁
In timer interruption processing for performing the normal game reel control program, normal game reel control processing is performed when the reel status is in the first state and the normal game reel control processing is not performed when the reel status is in the second state.例文帳に追加
通常遊技回胴制御プログラムを動作させるタイマー割り込み処理において、リールステータスが第1状態であるとき通常遊技回胴制御処理を行い、リールステータスが前記第2状態であるとき通常遊技回胴制御処理を行わない。 - 特許庁
When a count value of a timer 2 counting up for every predetermined time coincides with a required time point of a register 4, a first comparing circuit 6 outputs a first trigger to an output circuit 8, and then the output circuit 8 outputs a starting signal (port output, interruption).例文帳に追加
一定時間毎にカウントアップするタイマ2のカウント値が、レジスタ4の要求時刻に一致すると、第1比較回路6から第1トリガが出力回路8に出力されて、出力回路8から起動信号(ポート出力、割り込み)が出力される。 - 特許庁
A body ECU inputs data from an in-vehicle LNA or an input port by input processing in an S6 according to timer interruption, and arbitrates the contradiction of the input data by input arbitration processing in an S7, and generates output data based on the input data arbitrated by application processing in an S8.例文帳に追加
ボデーECUは、タイマ割込みによって、S6の入力処理で車内LANや入力ポートからデータを入力し、S7の入力調停処理にて入力データの矛盾を調停し、S8のアプリケーション処理で調停された入力データに基づいて出力データを生成する。 - 特許庁
The rotating position of the sprocket 457 formed by normally rotating a putout motor 465 4 times of timer interruption periods (7 ms=1.75 ms×4 times), or a backlash absorbing time, is defined as a home position of the sprocket 457 so as to absorb the inverse rotation of the sprocket 457 due to the backlash.例文帳に追加
バックラッシュ吸収時間である4回のタイマ割り込み周期(7ms=1.75ms×4回)だけ払出モータ465を正回転させたスプロケット457の回転位置をスプロケット457の定位置に設定することで、バックラッシュによるスプロケット457の逆回転を吸収している。 - 特許庁
A microcomputer 17 of the main power source control section 16 is set to a sleep mode in standby, detects discharging of the secondary battery 19, key entry, presence of an original, hook-off of a handset and the presence of a call signal by means of timer interruption caused every one second and starts the main power source 16 according to the result of detection.例文帳に追加
主電源制御部16のマイコン17はスタンバイ状態でスリープモードにあり、1秒毎のタイマ割り込みにより、二次電池19の放電検出、キー検出、原稿検出、ハンドセットのオフセット検出、呼出信号の検出を行い、検出結果に応じて主電源16を起動する。 - 特許庁
A sequencer module 102 comprises a routine for reading the tune time data from tune data prior to play of a musical tune and a timer interruption routine started at a preset fixed time interval after the start of the play to perform the read of an event data in the tune data or the supply to each part.例文帳に追加
シーケンサモジュール201は、曲の演奏開始に先立って曲データから曲時間データを取り込むルーチンと、演奏開始後、予め設定された一定時間間隔で起動され、曲データ中のイベントデータの読み出しや各部への供給を行うタイマ割り込みルーチンを含んでいる。 - 特許庁
The initialization of a random number circuit is carried out until the timer interruption is set after the start of closing a power source to a pachinko game machine 1 while in the initialization, the value based on the ID number proper to the microcomputer for game control is set as an initial value of random numbers (S154b).例文帳に追加
パチンコ遊技機1への電源投入が開始されてからタイマ割込設定を行なうまでに、乱数回路の初期設定を行なうとともに、初期設定において、遊技制御用マイクロコンピュータ固有のIDナンバに基づく値を乱数の初期値として設定する(S154b)。 - 特許庁
Thus, on the basis of the values of various kinds of counters acquired accompanying the entry of a ball to the first ball entrance 64 detected during the previous timer interruption processing, whether or not to permit the display of the continuous notice performance is determined by delay continuous notice determination processing.例文帳に追加
これにより、前回のタイマ割込処理の中で検出された第1入球口64への球の入賞に伴って取得された各種カウンタの値に基づき、連続予告演出の表示を許可するか否かの判定を、遅延連続予告判定処理によって行うことができる。 - 特許庁
A transmitting and receiving state detection section 7 detects timer completion in a communication control section 6, the reception of the refusal of packet communication registration, the reception of a request for disconnecting the packet communication, and the communication interruption during the packet communication, and outputs the detection results to a CPU 8.例文帳に追加
本発明に係る携帯電話機100によれば、送受信状態検出部7は、通信制御部6におけるタイマ満了、パケット通信登録拒否の受信、パケット通信切断要求受信、パケット通信中の通信中断を検出し、CPU8へ出力する。 - 特許庁
The initialization of a random number circuit is carried out before the setting of timer interruption after the start of closing the power source to a pachinko game machine 1 while in the initialization, a value based on the ID number proper to a microcomputer for game control is set as an initial value of the random numbers (S154b).例文帳に追加
パチンコ遊技機1への電源投入が開始されてからタイマ割込設定を行なうまでに、乱数回路の初期設定を行なうとともに、初期設定において、遊技制御用マイクロコンピュータ固有のIDナンバに基づく値を乱数の初期値として設定する(S154b)。 - 特許庁
When interruption by a timer 15 or an inputting device 16 occurs, the control unit 11 updates the number of displayed image, transmits the updated display image number into the display controller 14, and displays the displayed image corresponding to the updated display image number on the display device 13.例文帳に追加
制御装置11は、タイマ15による割り込み、または入力装置16による割り込みがあると、表示イメージ番号を更新し、更新した表示イメージ番号を表示コントローラ14に送り、その表示イメージ番号に対応する表示イメージを表示デバイス13に表示させる。 - 特許庁
Whether or not the random number is fetched to the random number value register for each start winning is monitored each time game control timer interruption processing is executed, and when a monitoring result that the random number is fetched is obtained, the random number is read from the random number value register and is stored in a prescribed random number read part.例文帳に追加
始動入賞毎の乱数値レジスタに乱数が取り込まれたか否かは、遊技制御用タイマ割込み処理が実行される度に監視されており、乱数が取り込まれたとの監視結果が得られると、乱数値レジスタから乱数が読み出され、所定の乱数読出部に格納される。 - 特許庁
A microcomputer of inputting an NE signal for generating the rising edge with every 10° CA, calculates rising edge interval time of this time of the NE signal by input capture interruption processing every time when its NE signal rises, and calculates time T1 equivalent to 1°CA by dividing its time by 10, and executes the setting for generating timer interruption when intentional delay time Tz passes.例文帳に追加
10°CA毎に立ち上がりエッジが生じるNE信号が入力されるマイコンでは、そのNE信号が立ち上がる毎のインプットキャプチャ割り込みの処理により、NE信号の今回の立ち上がりエッジ間隔時間を算出すると共に、その時間を10で割って1°CA分の時間T1を算出し、更に、故意の遅延時間Tzが経過したときにタイマ割り込みを発生させる設定を行う。 - 特許庁
In the case that the image reader requires power application (preheating) more than a power application duty that is usually employed, since an interruption timer is set to 15 min just after a CPU 502 enters its processing state from its halt state, a preheating time of 100 sec and a preheating power of 100% are set by using a conversion table.例文帳に追加
画像読取装置では、通常使用する通電デューティより多量の通電(予熱)を行う場合、CPU502がHALTから立ち上がった直後では、中断タイマは15分にセットされているので、変換テーブルにより予熱時間には100秒かつ予熱電力値には100%が設定される。 - 特許庁
Every time a timer 17 is excited, the interruption management part 53 executes a processing part 54 for control by interrupting the execution of the processing part 55 for information, and resumes the execution of the processing part 55 for information when the execution of the processing part 54 for control ends, and switches the processing part 55 for information and the processing part 54 for control.例文帳に追加
割込管理部53は、タイマ部17の励起の度に、情報用処理部55の実行を中断して制御用処理部54を優先して実行し、制御用処理部54の実行が終了すると情報用処理部55の実行を再開して、情報用処理部55と制御用処理部54を切り替える。 - 特許庁
The emulation circuit is provided with a data register circuit 22, a decoded address register circuit 23 and a status register circuit 24 to be accessed from the LSI test program(TP) and from an emulation program(EP) separately from the LSI test program and equivalent to a register of an LSI, an address decoding circuit 21, a timer circuit 26, and first and second interruption circuits 25, 27.例文帳に追加
LSIテストプログラム(TP)およびこれとは別にエミュレーションプログラム(EP)からそれぞれアクセスできる、LSIのレジスタに相当するデータレジスタ回路22、デコードアドレスレジスタ回路23およびステータスレジスタ回路24と、アドレスデコード回路21と、タイマー回路26と、第1および第2割り込み回路25、27とを備えている。 - 特許庁
Even if an interruption direction by the drive control based on a second control data is directed during the ordinary direction by the drive control based on a first control data, the drive control based on the first control data is restarted from a time point when the drive control based on the first control data counted by a timer means passes.例文帳に追加
第1の制御データに基づく駆動制御による通常の演出中において第2の制御データに基づく駆動制御による割込演出を行なっても、計時手段が計時している第1の制御データに基づく駆動制御の経過の時点から第1の制御データに基づく駆動制御を再開する。 - 特許庁
A random number generation part 5 generates random numbers from a counted value of an internal counter 4 at the time of interruption to a CPU 3 by an internal clock 1 of each node, waiting time is generated by multiplying the random numbers by a timing numeric value by a multiplication part 6 and a network participation processing part 8 performs participation processing after the waiting time counted by a timer counting part 7.例文帳に追加
各ノードの内部時計1によるCPU3への割り込み時の内部カウンタ4の計数値から乱数発生部5が乱数を発生し、乗算部6でタイミング数値を乗じて待ち時間を発生し、タイマ計時部7で計時した待ち時間後にネットワーク参加処理部8が参加処理をする。 - 特許庁
| 例文 |
| Copyright © Japan Patent office. All Rights Reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|