noteを含む例文一覧と使い方
該当件数 : 6413件
Set the /dev entry to use for the printer, and note it in /etc/printcap with the lp capability; see the Identifying the Printer Device for more information. 例文帳に追加
プリンタを使用するために /dev エントリを設定し、/etc/printcap の lp項目でそのエントリを指定します。 これについては、「 プリンタデバイスの特定」 を参照してください。 - FreeBSD
(Note that header pages go with each job, not each file in a job, so the paper waste might not be that bad.)The LPD system can provide header pages automatically for your printouts if your printer can directly print plain text. 例文帳に追加
もし、プリンタがプレインテキストを直接印字できるならば、LPDシステムは印字物に対して自動的にヘッダページを付けることができます。 - FreeBSD
It is the currently active job (note the word active under the Rank column), which means the printer should be currently printing that job. 例文帳に追加
このジョブは、現在、 アクティブジョブ(Rank の欄の active という後に注目)になっています。 これは、プリンタからそのジョブが現在印字されているはずであることを意味しています。 - FreeBSD
It is useful to note that many sites may have a particularly large number of users requiring several different user classes. 例文帳に追加
三種 類のセキュリティヘッダ (ホスト A からホスト Bに一つ、ホスト B から ホスト A に二つ) を生成するので、この安全なチャネルには三 つの SPIが必要になることに注意してください。 - FreeBSD
These tools are available as packages or from the sysutils/xcdroast and sysutils/k3b ports. X-CD-Roast and K3b require the ATAPI/CAM module with ATAPI hardware. 例文帳に追加
Note: FreeBSD5.X または FreeBSD4.8-RELEASE以降のバージョンを使用している場合、 ATAPI/CAM モジュールを使用すると ATAPI ハードウェア上で SCSI ドライブ用の cdrecordおよび他のツールを使用できるようになります。 - FreeBSD
The first IP is the master's IP and the second IP is the directory that was created in /diskless to store the slave'sinitial filesystem. About Etherboot Note: This isn't required if you are using PXE boot.例文帳に追加
最初のIPアドレスはマスターのIPアドレスで、二番目のIPドレスは/disklessに中に作成した、スレーブの初期のファイルシステムが保存されているディレクトリです。 - Gentoo Linux
Note: Make sure that --exec actually calls a service and not just a shell script that launches services and exits -- that's what the init script is supposed to do.例文帳に追加
注意: --exec が、サービスを呼び出したり停止するシェルスクリプトではなく(これはinitスクリプトがサポートする事柄です)、実際にサービスを呼び出すようにしてください。 - Gentoo Linux
Note: If your system does not have any floppy drives, add the --no-floppyoption to the above command to prevent grub from probing the (non-existing)floppy drives. 例文帳に追加
注意: もしあなたのシステムにフロッピードライブがないなら、GRUBが存在しないフロッピードライブを捜査しないように、--no-floppyオプションを上記コマンドに追加してください。 - Gentoo Linux
Note: If your root filesystem is JFS, you must add " ro" to the kernelline since JFS needs to replay its log before it allows read-write mounting. 例文帳に追加
注意: rootファ�ぅ襯轡好謄爐�FSの場合には、JFSでは、read-writeマウントを許可する前にログを再読み込みする必要があるので、" ro"をkernelに加えなければなりません。 - Gentoo Linux
Note: If you receive a Could not find any loop device error message when mounting the iso, you need to enable the Loopback device support option in your kernel configuration.例文帳に追加
注意:isoイメージをマウントした際に、Couldnotfindanyloopdevice(訳注:ループデバイスが見つからない)というエラーが発生した場合は、カーネル設定でLoopbackdevicesupportを有効にする必要があります。 - Gentoo Linux
Note: The rest of the installation handbook is mostly unchanged so we shall not walk you through it again except to point out differences.例文帳に追加
注意:インストールのハンドブックの残りについては、ここで差異を示した以外は、再度読み直さなくてよいようにしているので、ほとんど変わりありません。 - Gentoo Linux
# mount /boot# cp arch/i386/boot/bzImage /boot/bzImage-2.6.10-gentoo-r4 Note that the above instructions are examples only, you should follow your usual procedure of updating kernels by following the instructions in the Gentoo Handbook (see the Configuring theKernel chapter).例文帳に追加
上記の説明は例に過ぎず、GentooHandbook(日本語訳)(ConfiguringtheKernel(日本語訳)の章を見てください)の説明に従った更新手続きを行うべきです。 - Gentoo Linux
Note: If this command fails at any point due to errors, you can use emerge --resume to continue the process where you left off.例文帳に追加
注意:このコマンドがエラーのせいで止まってしまった場合は、どこで止まっても、emerge--resumeとすることで止まった時点から処理をやり直すことができます。 - Gentoo Linux
Note: If the suggested settings don't work for you, you should run emerge -pvxorg-server, check all the options available and choose those which apply to your system.例文帳に追加
注意:提示した設定でうまくいかなければ、emerge-pvxorg-serverを実行し利用可能なオプションを全てチェックした上でシステムに適用すべきものを選択して下さい。 - Gentoo Linux
This can be accomplished with a simple: ether=0,0,eth1 Note that the values of zero for the IRQ and I/O base in the above example tell the driver(s) to autoprobe. 例文帳に追加
これは簡単で、次のようにすればよい。 ether=0,0,eth1この例で IRQ と I/O ベースアドレスに 0 を指定しているのは、ドライバに自動検出をするよう伝えているのである。 - JM
Note: If you are using Windows Vista, have GlassFish installed to Program Files, and have User Access Control enabled, you will not be able to make changes to the axis2.war file from the IDE. 例文帳に追加
注: Windows Vista を使用している場合は、GlassFish を Program Files フォルダにインストールし、ユーザーアクセス制御を有効にすると、IDE から axis2.war ファイルへの変更を行えなくなります。 - NetBeans
Note: If you drop the component in a place you do not want and thuscause several undesired layout changes, you can use the Undo command to reverse the changes.例文帳に追加
注: 意図していなかった位置にコンポーネントをドロップし、その結果、レイアウトが変更された場合は、「元に戻す」コマンドを使用して変更を取り消すことができます。 - NetBeans
You need to register with Nabble to use this forum service.In addition, messages posted via the forum will be moderated by us unless you sign up to the list of non-subscribers allowed to post.To save your messages being moderated, and to save the moderators work, please contact the list owner and request this. Note : This service is supplied by the Free Hosted Public Forums service by Nabble.例文帳に追加
IDE の開発に深く関わっている場合は、その他のリスト (構築リスト、バグ、CVS) も役立つことがあります。 - NetBeans
Note: If you used the bundle installer, the Sun Java System ApplicationServer was installed and configured automatically so it is not necessary to carry out the registration procedure outlined above.例文帳に追加
注: バンドルのインストーラを使用した場合は、Sun Java System Application Server が自動的にインストールされ、設定されているので、上記の手順で登録を行う必要はありません。 - NetBeans
Note: The NetBeans IDE and Sun Java System Application Server bundlecreates the admin user with password adminadmin by default.Users should use these settings to log in via the web console. 例文帳に追加
注: NetBeans IDE と Sun Java System Application Server のバンドルでは、パスワードが adminadmin の admin ユーザーがデフォルトで作成されます。 ユーザーは、これらの設定を使用して Web コンソールからログインする必要があります。 - NetBeans
Note: Although we strongly recommend using the JAX-WS model for creating SOAP services, the IDE continues to support JAX-RPC web services for legacy reasons. 例文帳に追加
注: SOAP サービスの作成には JAX-WS モデルを使用することを強くお勧めしますが、IDE では従来サービスに対応するために JAX-RPC Web サービスも引き続きサポートしています。 - NetBeans
Note: Projects created with the Visual Mobile Designer in earlier versions of the Mobility Pack will be upgraded to a new format when opened in version 5.5.例文帳に追加
注: 以前のバージョンの Mobility Pack に含まれるビジュアルモバイルデザイナーを使用して作成されたプロジェクトは、バージョン 5.5 で開くと、新しい形式にアップグレードされます。 - NetBeans
Note: If you wish to run the IDE on earlier versions of the SDK or if you prefer to install the IDE manually, you can download archived versions of the IDE at http://java.sun.com/products/archive/index.html.例文帳に追加
注: http://java.sun.com/products/archive/index.html からアーカイブ版の IDE をダウンロードすることによって、以前のバージョンの SDK で IDE を実行したり、IDE を手動でインストールしたりすることができます。 - NetBeans
Note: To use the Travel database with a server other than the Sun Java SystemApplication Server, you must make the derbyclient.jar available to the server, as described in the following section.例文帳に追加
注: Sun Java System Application Server 以外のサーバーとともに Travel データベースを使用するには、次の節の説明に従って、derbyclient.jar をそのサーバーで使用できるようにしてください。 - NetBeans
Note: Because you also need the Sun Java System Application ServerPE 8 2005Q1 to work with the J2EE features of NetBeans IDE 4.1, your computermust also meet the applicationserver's minimum requirements. 例文帳に追加
注: NetBeans IDE 4.1 の J2EE 機能と連携するには、Sun Java System Application Server PE 8 2005Q1 も必要なため、ご使用のコンピュータはアプリケーションサーバーの最小要件も満たしている必要があります。 - NetBeans
Note: Because you also need the Sun Java System Application ServerPE 8 to work with the J2EE features of NetBeans IDE 5.0, your computermust also meet the applicationserver's minimum requirements. 例文帳に追加
注: NetBeans IDE 5.0 の J2EE 機能と連携するには、Sun Java System Application Server PE 8 も必要なため、ご使用のコンピュータはアプリケーションサーバーの最小要件も満たしている必要があります。 - NetBeans
Note: If you are running the NetBeans IDE on Mac OS X, see UsingNetBeans on Mac OS X for more information about keyboard equivalents,tips and tricks, and other Mac-specific topics. 例文帳に追加
注: Mac OS X で NetBeans IDE を実行している場合、キーボードによる同等の操作、ヒントやコツ、Mac 固有の項目の詳細は、Using NetBeans on Mac OS X を参照してください。 ページの先頭へ - NetBeans
Note: The installation directory must be empty, and the user profile you are using to run the installer must have read/write permissions for this directory. 例文帳に追加
注: インストールディレクトリは空である必要があります。 また、インストーラの実行に使用しているユーザープロファイルに、このディレクトリの読み取り/書き込み権が必要です。 - NetBeans
Note: If you edit the Project Properties in NetBeans IDE 6.1for a project that was created in NetBeans IDE 4.1 or earlier, the project will no longer work in the earlier NetBeans IDE versions.例文帳に追加
注: NetBeans IDE 4.1 以前で作成されたプロジェクトのプロジェクトプロパティーを NetBeans IDE 6.1 で編集すると、そのプロジェクトは NetBeans IDE の以前のバージョンでは機能しなくなります。 - NetBeans
Although the choice is yours, note that when you add the Java project to the web project, you enable the IDE to build the applet whenever you build the web application.例文帳に追加
どちらを選択することもできますが、Java プロジェクトを Web プロジェクトに追加する場合、Web アプリケーションを構築するたびに、IDE でそのアプレットが毎回構築されます。 - NetBeans
Note that applets run in the virtual machine of the IDE's default web browser.The IDE uses a different virtual machine and therefore applets are not included in a web application's debug session.例文帳に追加
アプレットは、IDE のデフォルトの Web ブラウザの仮想マシンで実行されます。 IDE は別の仮想マシンを使っているため、Web アプリケーションのデバッグセッションには、アプレットは含まれません。 - NetBeans
Note that this is paradoxical - this collector is designed to work best on multiprocessor systems with gigabyte heaps. 例文帳に追加
このコレクタは、ギガバイトのヒープを持つマルチプロセッサシステムで最高の働きをするようにデザインされていますから、矛盾する結果であることに注意してください。 - NetBeans
Note: If you are using a firewall, you may need to disable the firewall to allow the application client to access the EJB.例文帳に追加
注: ファイアウォールを使用している場合は、アプリケーションクライアントから EJB にアクセスできるようにするため、ファイアウォールを無効にする必要がある場合があります。 - NetBeans
Note: As you add modeling elements to the diagram, you can select them and drag them to new locations in the Diagram editor to improve the appearance of the diagram. 例文帳に追加
注: モデリング要素を図に追加するときは、図エディタ内で各要素を選択して新しい場所まで移動することで、図を見やすくすることができます。 - NetBeans
Note: If you draw too many class elements, deselect the Class icon, then right-click the class element you want to delete and select Edit Delete. 例文帳に追加
注: 必要数を超えるクラス要素を描画した場合は、「クラス (Class)」アイコンを選択解除し、削除するクラス要素を右クリックして、「編集」「削除」を選択します。 - NetBeans
Note: If a user of your application tries to upload a file larger than the value of the maxSize parameter,the following exception is thrown and caught as a validation error: 例文帳に追加
注: アプリケーションのユーザーが maxSize パラメータの値よりも大きいファイルをアップロードしようとすると、次の例外がスローされ、妥当性検査エラーとしてキャッチされます。 - NetBeans
Note: You are placing the text file in the lib folder because, by default,when you run the project from the IDE,the default working directory is the lib folder.例文帳に追加
注: テキストファイルを lib フォルダに置こうとしています。 これは、デフォルトで、IDE からプロジェクトを実行する場合に、デフォルトの作業用ディレクトリが lib フォルダであるためです。 - NetBeans
Note: If you plan to use this project solely for this tutorial, you will not be accessing any databases,so you can accept the default database settings.例文帳に追加
注: このプロジェクトを単にこのチュートリアルのためにのみ使用する場合、データベースにアクセスすることがないため、データベース設定をデフォルトのままにすることもできます。 - NetBeans
Note: Steps 1-5 can be done in a simpler and faster way: just double click jLabel1 in the design view,change the text from jLabel1 to Find What: ,and press Enter.例文帳に追加
注: 手順 1 から 5 は、より簡単かつ迅速な方法で行うことができます。 デザインビューで jLabel1 をダブルクリックし、テキストを「jLabel1」から「Find What: 」に変更して、Enter キーを押します。 - NetBeans
Note: When you assign an action to a component, that component'stext, toolTipText, and icon properties are set according to what you have entered in the Set Action dialog box.例文帳に追加
注: コンポーネントにアクションを割り当てると、「アクションを設定」ダイアログでの入力内容に従って、そのコンポーネントの「text」、「toolTipText」、および「icon」プロパティーが設定されます。 - NetBeans
Note: Your project folder cannot already contain a folder called nbproject,because this is the name of the folder that the IDE creates to house the project-level files. 例文帳に追加
注: 選択したプロジェクトフォルダに、nbproject というフォルダが含まれていてはいけません。 これは、プロジェクトレベルのファイルを格納するために IDE が作成するフォルダ名です。 - NetBeans
Note: Choosing this option is necessary to get to the panel for setting the network options where you will turn off the firewall for the port used by the MySQL server. 例文帳に追加
注: このオプションは、MySQL サーバーで使用するポートに対してファイアウォールをオフにするネットワークオプションの設定パネルを取得するため、選択する必要があります。 - NetBeans
To switch sessions, you can double-click on the session you want to make current, or right-click a non-current session and choose Make Current. Note: It is not recommended to switch sessions if the session you are currently working in is suspended.例文帳に追加
複数のセッション間を切り替えるには、現在のセッションにするセッションをダブルクリックするか、右クリックして「現在に設定」を選択します。 - NetBeans
Note: This tutorial uses the MySQL database server.See the Installing and Configuring Ruby Support article for information about using a MySQL database server in a Ruby application.例文帳に追加
注: このチュートリアルでは、MySQL データベースサーバーを使用します。 Ruby アプリケーションでの MySQL データベースサーバーの使用については、「Ruby サポートのインストールと設定」を参照してください。 - NetBeans
Note: The first time that you open or create a Ruby project in the IDE, the IDE checks if you have any other Ruby installations in addition to the bundled JRuby software.例文帳に追加
注: IDE で Ruby プロジェクトを最初に開くか、または作成すると、バンドルされた JRuby ソフトウェア以外に Ruby のインストールが存在するかどうかが IDE によって確認されます。 - NetBeans
Note: Wherever you see the icon, you can click to view a detailed interactive demonstration of the steps described in the tutorial. 例文帳に追加
注: アイコンが表示されているところでは、それをクリックすると、チュートリアル内で説明している手順について、対話形式の詳細なデモを参照できます。 - NetBeans
Note that, in NetBeans IDE 3.6, IDE command-line switches can be entered in GNU style, meaning they are preceeded with two dashes (for example, --jdkhome)rather than one.例文帳に追加
NetBeans IDE 3.6 では、IDE コマンド行スイッチが GNU 形式で入力できるようになっています。 たとえば --jdkhome というように先頭に 1 つではなく、2 つのハイフンが付くことになります。 - NetBeans
Note: As with the JavaServer Pages implementation, when the server constructs a page from JSP source, the tag attribute settings in the JSP source take precedence over runtime settings. 例文帳に追加
注: JavaServer Pages の実装と同様に、サーバーで JSP ソースからページが構築されるとき、JSP ソースでのタグ属性の設定は、実行時の設定より優先されます。 - NetBeans
Note: If you installed the BluePrints AJAX Component library with the Technology Preview release, you must remove this library and then re-install the library for use with the production release.例文帳に追加
注: Technology Preview リリースの BluePrints AJAX コンポーネントライブラリをインストールした場合、そのライブラリを削除してから、正式リリースで使用するライブラリを再インストールする必要があります。 - NetBeans
| この対訳コーパスは独立行政法人情報通信研究機構の研究成果であり、Creative Commons Attribution-Share Alike 3.0 Unportedでライセンスされています。 |
| Copyright 1994-2010 The FreeBSD Project. All rights reserved. license |
| Copyright 2001-2010 Gentoo Foundation, Inc. The contents of this document are licensed under the Creative Commons - Attribution / Share Alike license. |
| © 2010, Oracle Corporation and/or its affiliates. Oracle and Java are registered trademarks of Oracle and/or its affiliates.Other names may be trademarks of their respective owners. |
| Copyright (c) 2001 Robert Kiesling. Copyright (c) 2002, 2003 David Merrill. The contents of this document are licensed under the GNU Free Documentation License. Copyright (C) 1999 JM Project All rights reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|