| 例文 |
reference speedの部分一致の例文一覧と使い方
該当件数 : 1368件
When the determination section determines that the signal is smaller than the reference value, the frequency changing section decreases the clock frequency, reduces the processing speed of the main ECU, and reduces power consumption.例文帳に追加
信号が基準値よりも小さいと判定部で判定されたとき、周波数変更部がクロックの周波数を低くし、主ECUの処理速度を遅くして、消費電力を低減する。 - 特許庁
Moreover, a weighing value in an arbitrary rotation speed set in order to calculate a weighting function is multiplied by a coefficient calculated from a power supply voltage and a preset reference voltage.例文帳に追加
また、重み関数を演算するために設定する任意の回転子速度における重み値は、電源電圧と事前に設定する基準電圧とから演算される係数が乗じられる。 - 特許庁
The operation for detecting the reference position can thereby be carried out in a shorter time as compared with the case where the ink carriage is moved at a low speed at all times and trouble due to impact of the ink carriage can be prevented.例文帳に追加
これにより,常に低速で移動させる場合と比べて基準位置検出動作の短時間化が可能であり,インクキャリッジの衝撃による不具合も防止できる。 - 特許庁
The calculated value T and the reference value X of the shutter speed are compared to select the driving current value of a shutter mechanism 39 in the current selection part 37 of a shutter driving control circuit 36.例文帳に追加
シャッタ駆動制御回路36の電流選択部37では、シャッタ速度の算出値Tと基準値Xとを比較して、シャッタ機構39の駆動電流値を選択する。 - 特許庁
The step of placing the static starter 135 in a torque control mode includes: setting a torque enable signal; and setting a speed reference signal to greater than about 95%.例文帳に追加
静止型起動装置135をトルク制御モードにするステップは、トルクイネーブル信号を設定するステップと、速度基準信号を約95%以上に設定するステップとを含むことができる。 - 特許庁
A master unit delivers a current control command from a speed control section 1 to a unit 2A and transmits it to a unit 2B, and transmits a synchronization reference signal of PWM carrier to the slave unit 2B.例文帳に追加
マスターユニットは、速度制御部1から電流制御指令をユニット2Aに出力およびユニット2Bに伝送し、PWMキャリアの同期基準信号をスレーブユニット2Bに伝送する。 - 特許庁
To arrange an optimal combination of a transmitted frequency (reference frequency) and a transmitted repetition frequency (PRF) in the case that a speed range expands in a pulse doppler method.例文帳に追加
パルスドプラ法において、速度レンジを拡大する場合に、送信周波数(参照周波数)と送信繰り返し周波数(PRF)の最適な組み合わせが設定されるようにする。 - 特許庁
The control device 100 has a storage section for storing reference air volumes respectively corresponding to a rotation speed per unit time of the compressor 22 in the cooling operation in several stages.例文帳に追加
制御装置100は、冷房運転時における圧縮機22の単位時間あたりの回転数の大きさに対応する基準風量を複数の段階として格納する記憶部をもつ。 - 特許庁
The judgment result and the newly generated print data are updated as the print condition, and supplied as comparison reference data for judging whether or not it is possible to carry out the high speed processing.例文帳に追加
判別の結果及び新たに生成した印刷データは印刷条件として更新し、高速処理を行なうことが可能か否かを判断するための比較対照データとして補充する。 - 特許庁
The temperature control circuit has a function to change an operation speed of the semiconductor package with reference to the temperature of the semiconductor package measured by the temperature measurement device.例文帳に追加
前記温度制御回路は、前記温度測定装置で測定された前記半導体パッケージの温度を基準にして、前記半導体パッケージの動作速度を変化させる機能を有する。 - 特許庁
To improve the accuracy of initialization in initialization processing means which calculates and updates a pressure reduction determination reference value from each wheel rotation condition found from a wheel speed signal.例文帳に追加
車輪速信号から得られる各々の車輪の回転状態から減圧判定基準値を演算して更新する初期化処理手段における初期化の精度を向上させること。 - 特許庁
When the shift position is at a "first speed" position and a clutch is under a perfect divided state and an operation of an accelerator pedal starts, the MG torque is increased more than the MG torque final reference value.例文帳に追加
シフト位置が「1速」であり且つクラッチが完全分断状態にあり且つアクセルペダルの操作が開始されたとき、MGトルクがMGトルク最終基準値より大きくされる。 - 特許庁
To facilitate visual confirmation of the change in tempo of the performed music in displaying instruction marks in a resting state and in scrolling the display of a reference mark at prescribed speed.例文帳に追加
指示マークを静止状態で表示し、基準マークを所定速度でスクロール表示する場合において、演奏する音楽のテンポの変化を視覚により確認することを容易にする。 - 特許庁
When the AC generator 3 stops, the engine speed command n* is gradually increased to a non-signal reference side, the water amount is decreased, thus restraining unnecessary torque fluctuations to the waterwheel.例文帳に追加
さらに交流発電機3の停止時は、回転数指令n*を反信号基準側に漸増しながら、水量を減じるようにすることによって水車への不要なトルク変動を抑制する。 - 特許庁
A controller 100 compares the detected permanent magnet induced voltage with an expected reference voltage that represents an expected permanent magnet induced voltage at full magnetization and the predetermined speed.例文帳に追加
制御器100は、検出された永久磁石誘導電圧を、所定速度における完全磁化状態で予想される永久磁石誘導電圧である予想基準電圧と比較する。 - 特許庁
To provide a cache maintenance technology for suppressing increase in processing loads without deteriorating a reference speed even in an environment where update processing is highly frequently performed on a database.例文帳に追加
本発明は、データベースに高い頻度で更新処理が行われる環境においても、参照速度が低下せず、処理負荷の増大を最小限に抑えるキャッシュメンテナンス技術を提供する。 - 特許庁
A controller 100 compares the permanent magnet induction voltage thus detected with a predicted reference voltage representative of the permanent magnet induction voltage being predicted at a specified speed under fully magnetized state.例文帳に追加
制御器100は、検出された永久磁石誘導電圧を、所定速度における完全磁化状態で予想される永久磁石誘導電圧を表す予想基準電圧と比較する。 - 特許庁
In a braking torque distribution means 69, when the deceleration of the vehicle detected by a deceleration detection means 73 is high, a first reference vehicle speed is set to higher than when it is low.例文帳に追加
制動トルク配分手段69では、減速度検出手段73で検出される車両の減速度が高いときには低いときよりも第1基準車速が高く設定される。 - 特許庁
As a result, the monitor voltage Vm is allowed to reach to the reference voltage intentionally and rapidly before the operation of APC starts and the delay caused by a starting speed of the monitor voltage can be compensated.例文帳に追加
このことにより、APC動作開始直前までにモニタ電圧Vmを故意に且つ急速に目標電圧にし、モニタ電圧の立ち上がりスピードによる遅れを補うことができる。 - 特許庁
The number of steps of the damping forces is determined in the selected damping force map with reference to vehicle speed, and the suspension control of the vehicle is performed based on the number of the steps of the damping forces (S8).例文帳に追加
こうして選択された減衰力マップに車速を参照して減衰力段数を決定し、この減衰力段数に基づいて車両のサスペンション制御を行う(S8)。 - 特許庁
Type of liquid in the fuel tank 2 can be distinguished by comparing the corrected measured transmission speed Vc and reference transmission speeds Vg, Vd, Vw.例文帳に追加
そして、補正測定伝播速度Vcとこれらの基準伝播速度Vg、Vd、Vwとを比較対照することにより、燃料タンク2内の液体種類を判別可能としている。 - 特許庁
Namely, a reproducing speed is largely decreased at a time point earlier by t than time points T1, T2, T3, T4 and T5, which are all the editing points of the reference data, to enable a user to easily designate the editing point.例文帳に追加
すなわち、リファレンスデータの編集ポイントである時間T1、T2、T3、T4、T5の時間t前より再生速度を大きく落とし、ユーザーが編集ポイントを指定しやすくする。 - 特許庁
The circuit 34 outputs charge read pulses (CH1 and CH2) 36 after shutter time which is set with the pulse 28 as reference and obtains a fast shutter speed that is asynchronous with an internal horizontal synchronizing signal.例文帳に追加
制御回路34は、前縁検出パルス28を基準に、設定されたシャッタ時間後に電荷読み出しパルス(CH1、CH2)36を出力し、内部水平同期信号に非同期に高速シャッタスピードを得る。 - 特許庁
A carriage 1, having a read system mounted thereon, slows down in a transition process from slow-up to a constant speed, and the reference white board 22 is read early in this timing in a comparatively small vibration state.例文帳に追加
読取系を載せたキャリッジ1をスローアップから定速への移行過程でスローダウンさせ、このタイミングで基準白板22を早期に、比較的振動の少ない状態で読取る。 - 特許庁
When a steering angle of the steering wheel is within an angle range from a lock reaction force reference steering angle θlock to a limit steering angle θlimit, lock reaction force to be applied to the steering wheel is determined so as to be reduced as steering angle speed ω and vehicle speed V decrease.例文帳に追加
操舵ハンドルの操舵角がロック反力基準操舵角θlockから限界操舵角θlimitまでの角度領域内の操舵角であるときに、操舵ハンドルに付与するロック反力を、操舵角速度ω、車速Vが小さいほど小さくなるように決定する。 - 特許庁
Since at least the one redundant gyroscope is provided, by using speed information from the remaining gyroscopes under operation when the selected gyroscope is kept in an offline state, a reference speed around the axis of the gyroscope in the offline is derived.例文帳に追加
少なくとも1つの冗長なジャイロスコープが設けられているので、選択したジャイロスコープがオフラインになっているとき、残りの動作中のジャイロスコープからの速度情報を用いれば、オフラインのジャイロスコープの軸を中心とする基準速度を導き出すことができる。 - 特許庁
Patterns Q1, Q2 of a plurality of image data G imaged in different times by a rear camera are acquired when the vehicle speed is less than the reference speed Vk, and the moving distance DM is found, based on the patterns Q1, Q2 (steps S1-6 to S1-14).例文帳に追加
車両が前記基準車速Vk未満の時、後方カメラで異なる時間に撮像した複数の画像データGのパターンQ1、Q2を取得し、そのパターンQ1、Q2に基づいて移動距離DMを求める(ステップS1−6〜ステップS1−14))ようにした。 - 特許庁
If they do not match, an idle lift degree is set, the idle lift degree is changed so as to keep engine speed within a tolerance range of idling speed, the rotation angle for the idle portion is subtracted from the obtained angle of the control shaft, and reference angle is updated by the difference.例文帳に追加
一致しない場合、アイドルリフト量を設定し、エンジン回転数がアイドル回転数の許容範囲内に収まるようにアイドルリフト量を変更し、その後取得したコントロールシャフトの角度からアイドル分の回転角を減算し、その差で基準角度を更新する。 - 特許庁
The image forming device also has a speed difference arithmetic operation part 35 for controlling the drive of skew correction rollers 5a and 5b according to a rotating speed difference between the skew correction rollers 5a and 5b arithmetically operated based on the inclination of the reference edge detected by the area sensor 24.例文帳に追加
さらに、画像形成装置は、エリアセンサ24により検知された基準辺の傾きに基づいて演算された斜行補正ローラ5a、5b間の回転数差に応じて斜行補正ローラ5a、5bを駆動制御する速度差演算部35を備えている。 - 特許庁
Increase of negative pressure in a supply tube is suppressed by lowering the scanning speed of a carriage, i.e., the recording speed, when the ink temperature sensed by a temperature sensor is lower than a reference ink temperature T thereby prolonging the ejection time interval of the recording head.例文帳に追加
温度センサによって検出されるインクの温度が、基準インク温度T未満となった場合には、キャリッジの走査速度、すなわち記録速度を低下させ、記録ヘッドの吐出の時間間隔を長くすることによって、供給チューブ内の負圧の上昇を抑制する。 - 特許庁
A regulation characteristic setting part 50b of an engine controller 50 previously sets regulation characteristics for a high speed region, a medium speed region and an idling region using matrix functions f(A1), f(A2), f(A3) and selectively sets them corresponding to a reference target number of revolutions N_R.例文帳に追加
エンジンコントローラ50のレギュレーション特性設定部50bは、高速領域用、中速領域用、アイドル領域用のレギュレーション特性をマトリックス関数f(A1),f(A2),f(A3)により予め設定しておき、基準目標回転数N_Rに応じたものを選択し設定する。 - 特許庁
The vehicle periphery photographing system loaded on a vehicle controls the frame rate of a photographed image output by a vehicle outside photographing camera on the basis of the fact that the relative speed of an obstacle around the vehicle to the vehicle is higher than a reference speed or the like.例文帳に追加
車両に搭載された車両周辺撮影システムが、当該車両の周辺の障害物の当該車両に対する相対速度が基準速度より高いこと等に基づいて、車外撮影カメラが出力する撮影画像のフレームレートを制御する。 - 特許庁
When a current throttle opening speed THcv is determined to be slower than a reference throttle opening speed THsv as the optimum fuel consumption rate, a reaction force of the accelerator pedal is decreased to lead the depressing amount of the accelerator pedal by the driver to the further depressing direction.例文帳に追加
現在スロットル開度速度THcvが、最適燃料消費率となる規範スロットル開度速度THsvより小さいと判定した場合には、アクセルペダルの反力を低下させ、運転者によるアクセルペダルの操作量を踏み込み方向に誘導する。 - 特許庁
While a reference fixing speed which is the same value as paper transporting speed is determined (S103) on the basis of each information of the paper grammage and the paper type, control fixing temperature is also determined (S104) on the basis of each information of the paper grammage and the paper type.例文帳に追加
用紙坪量および用紙種類の各情報に基づいて、用紙搬送スピードと同じ値である基準定着スピードを決定すると共に(S103)、用紙坪量および用紙種類の各情報に基づいて制御定着温度も決定する(S104)。 - 特許庁
This inkjet printer, which is provided with a first detector for detecting a movement speed of one side edge of the endless belt and a second detector for detecting a movement speed of the other side edge, determines reference timings by a difference between a detection value of the first detector and that of the second detector.例文帳に追加
エンドレスベルトの一方のサイドエッジの移動速度を検出する第1検出器と、他方のサイドエッジの移動速度を検出する第2検出器を設け、第1検出器の検出値と前記第2検出器の検出値の差によって、基準タイミングを決定する。 - 特許庁
Then, a stacker crane is moved from its reference position, at a low speed in a learning section A1 corresponding to the auxiliary data of the supports, and at a high speed in the other section A2, and precise position data of the supports is stored as fixed position data of the supports, in the memory.例文帳に追加
次にスタッカクレーンを基準位置から走行させ、各支柱の予備位置データと対応する学習区間A1は低速で、その他の区間A2は高速で走行させて支柱の正確な位置データを支柱の定位置データとして記憶装置に記憶させる。 - 特許庁
However, when the electric charging and discharging management device receives an NG report from an HV control part (530) or difference between the vehicle speed pattern shown by the running history and current vehicle speed pattern exceeds the reference value or more, the management device stops the control by the HV control part based on the charging plan in the electric charging and discharging control.例文帳に追加
ただし、HV制御部からNG通知を受けるか(530)、走行履歴の示す車速パターンと現在の車速パターンの乖離が基準幅以上となった場合、充放電制御は、充電計画に基づいたHV制御部の制御を中止する。 - 特許庁
While an accelerator reaction force is continuously controlled according to the risk potential, a click reaction force is generated when self-vehicle speed is at the reference vehicle speed or more, and a plurality of pieces of risk information on surroundings of the self-vehicle are transmitted to an operator as a different tactile stimulus.例文帳に追加
そして、リスクポテンシャルに応じて連続的にアクセルペダル反力を制御するとともに、自車速が基準車速以上の場合はクリック反力を発生させ、自車両周囲の複数のリスク情報を異なる触覚刺激として運転者に伝達する。 - 特許庁
The ECU sets virtual target hydraulic pressure Pv obtaining by offsetting the target hydraulic pressure Pref, and carries out feedback control making the wheel cylinder pressure Pwc follow the virtual target hydraulic pressure Pv without closing the boosting valve, when vehicle speed V is less than reference speed V1.例文帳に追加
ECUは、車両速度Vが基準速度V1未満の場合に、目標油圧Prefをオフセットさせた仮想目標油圧Pvを設定し、増圧弁を閉弁させずにホイールシリンダ圧Pwcを仮想目標油圧Pvに追従させるフィードバック制御を行う。 - 特許庁
At this time, the rotating speed of an output gear 23G2 is lower than a reference rotating speed, the movable stopper 63 is located at a first abutment position to make the second clutch plate 32 stay in such a separation range that it can be drawn to the first clutch plate 31 by an electromagnet 50.例文帳に追加
このとき、出力ギヤ23G2の回転速度が基準回転速度以下であると、可動ストッパ63が第1当接位置に位置して、第2クラッチ板32を電磁石50により第1クラッチ板31側に引き寄せ可能な離間範囲に留める。 - 特許庁
The signal charge for 2 bits is moved by one transfer operation, which is essentially equal to the transfer drive of signal charges at a double speed to a basic frequency (a reference transfer speed prescribed by a bi-phase repetition cycle) of an H register section 40.例文帳に追加
1回の転送動作で2ビット分の信号電荷が移動し、Hレジスタ部40の基本周波数(2相の繰返サイクルで規定される基準転送速度)に対して2倍の速度で信号電荷が転送駆動されていることと実質的に同等となる。 - 特許庁
Meanwhile, if a transmission condition changes because of degradation of communication quality, resulting in dropping of current transfer speed by 20% from a maximum speed value, a transmission frame 110 in which only data size of STREAMING block is reduced is transmitted at the same cycle as the reference transmission frame 100, such that the data size comes to be about 80% of the reference transmission frame 100 (see figure 4(b)).例文帳に追加
一方、通信品質の悪化により送信条件が変化し、現在の転送速度が最速値から20%低下した場合には、基準送信フレーム100の80%程度のデータサイズとなるよう、STREAMINGブロックのデータサイズのみが低減された送信フレーム110が、基準送信フレーム100と同一の周期で送信される(図4(b)参照)。 - 特許庁
The control means 40 calculates a reference value relating to electric power consumption required by the motor 100 at standard atmospheric pressure based on rotation speed of the motor 100 and air pressure detected by the delivery air pressure detection means 26, and controls rotation speed of the motor 100 based on the reference value and a measured value detected by an electric power consumption detection means 40.例文帳に追加
制御手段40は、モータ100の回転数と吐出空気圧力検出手段26にて検出された空気圧力とに基づき、標準気圧においてモータ100が必要とする消費電力に関連する基準値を算出し、基準値と消費電力検出手段40にて検出した測定値とに基づいてモータ100の回転数を制御する。 - 特許庁
To keep the area of irradiation of a hologram recording material with reference light to be always constant without inducing mechanical abrasion irrespectively of the variation in the incidence angle of the reference light at the time of recording a hologram by an angle multiplex recording system without degrading a high scanning speed and a small-size lightweight configuration.例文帳に追加
早いスキャンスピード及び小型軽量な構成を損なうことなく、角度多重記録方式によるホログラムの記録時に、参照光の入射角度が変化してもこの参照光がホログラム記録材料を照射する面積を機械的な摩耗を伴わずに常に一定にすること。 - 特許庁
Receiving area determination is carried out by comparing a RSSI signal of a beacon signal and reference voltage, and the reference voltage (threshold) is set so that receiving time at receiving distances l1, l2, and l3 in response to respective car speed v1, v2, and v3 is constant.例文帳に追加
ここで、受信エリア判定は、ビーコン信号のRSSI信号と基準電圧とを比較して行うが、自動車速度v1,v2,v3それぞれに対応する受信距離l1,l2,l3間における受信時間が一定となるよう、基準電圧(閾値)を設定する。 - 特許庁
A slipping angle estimating means 34 estimates the slipping angle of a front wheel in accordance with a steering angle and a vehicle speed, an SAT estimating means 36 estimates SAT in accordance with steering torque and assisting torque, and a slipping angle reference value computing means 38 computes a slipping angle reference value for an estimated value for the SAT.例文帳に追加
スリップ角推定手段34で、操舵角と車速とに基づいて前輪のスリップ角を推定し、SAT推定手段36で、操舵トルクとアシストトルクとに基づいて、SATを推定し、スリップ角基準値演算手段38でSATの推定値に対するスリップ角基準値を演算する。 - 特許庁
On the other hand, the control unit 108 sets the transfer rate of the storage medium 105 to a full speed (12Mbps) when the transfer rate of the storage medium 105 is not greater than the reference value A (or the size of data stored in the storage medium 105 is not greater than the reference value B).例文帳に追加
一方、記憶媒体105の転送レートが基準値Aよりも速くない場合(または、記憶媒体105に保存されているデータのサイズが基準値Bよりも大きくない場合)、制御ユニット108は記憶媒体105の転送レートをフルスピード(12Mbps)に設定する。 - 特許庁
Thus when a sudden drop of the wheel speed is detected prior to the start of the antiskid control, a reference for the start of the antiskid control set by a start reference setting means is corrected to make it harder to start the antiskid control, thereby prevent the antiskid control from being started.例文帳に追加
このように、アンチスキッド制御開始前に車輪速度の急激な低下を検出したときには、開始基準設定手段が設定するアンチスキッド制御の開始基準を、アンチスキッド制御の開始が困難となる方向に補正し、アンチスキッド制御が開始しないようにする。 - 特許庁
By generating the pulse patterns of a second inverter 15 with correcting reference waves, obtained by dividing sine-wave reference waveforms in a control circuit by a second inverter input voltage waveforms and carrier waves, a high-speed and high-precision output current feedback circuit is made unnecessary in phase response and transfer characteristics.例文帳に追加
制御回路内の正弦波基準波形を第2インバータ入力電圧波形で除算して得た補正基準波と、搬送波とで第2インバータ15のパルスパターンを生成することにより、位相特性と増幅特性において高速且つ高精度の出力電流フィードバック回路を不要とする - 特許庁
| 例文 |
| Copyright © Japan Patent office. All Rights Reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|