「COEFFICIENTS」に関連した英語例文の一覧と使い方(59ページ目) - Weblio英語例文検索

To solve such problems that stress is produced in piping by the difference of coefficients of linear expansion between a metal casing and a heat insulating board in a high temperature operation fuel cell, and thereby, a through-hole of the heat insulating board is widened or the heat insulating board is broken, heat insulating performance is substantially decreased and cell performance is also decreased.例文帳に追加

高温作動型燃料電池において、金属ケーシングと断熱ボードとの線膨張係数の違いに起因する配管への応力の発生により、断熱ボード貫通孔の拡大または断熱ボードの破壊が発生し、断熱性能を著しく低下させ発電性能を低下させることとなる。 - 特許庁

This vacuum pump is formed such that the motor case is firmly fixed to the stator even if the coefficients of thermal expansion of the stator and the motor case are different from each other by fitting an iron ring with an inner diameter smaller than the outer diameter of the motor case onto the outer peripheral part of the motor case where the stator is disposed to press the motor case toward the center part.例文帳に追加

モータケースの固定子が配置されている部分のモータケースの外周部に、モータケースの外径より小さい内径を持つ鉄製のリングを取りつけることにより、モータケースは中心部へ向かって押し付けられ、熱膨張係数の違いがあっても、固定子とより強固に固定される。 - 特許庁

By this arrangement, coefficients of thermal expansion of the slider and the objective lens are coincident, and dimensional changes of them with respect to the temperature change of them are equal, then the change of contraction/expansion different in the slider and the objective lens does not occur even though the device is used in a long period of time under the environment with large temperature change.例文帳に追加

これによってスライダと対物レンズとは、熱膨張係数が一致し、温度変化に対する寸法変化が等しく、温度変化の大きい環境で長時間用いても、スライダと対物レンズとの間で異なる収縮膨張変化を生じない。 - 特許庁

The temperature control device of the heating cylinder of the injection molding machine has temperature sensors 17f and 17g for measuring the temperatures of both ends in the axial direction of the band heater 16d nearest to a material falling port part 12 and a weight setting device 19 for setting weighting coefficients A and B with respect to the temperatures measured by the temperature sensors 17f and 17g.例文帳に追加

材料落し口部１２に最も近いバンドヒータ１６ｄの軸方向両端の温度を測定する温度センサ１７ｆ、１７ｇと、温度センサ１７ｆ、１７ｇが測定する温度に対して、重み係数Ａ、Ｂを設定する重み設定器１９を有する。 - 特許庁

The detecting film and the supporting body are formed from substances having different thermal expansion coefficients, and the temperature difference is provided between the temperature of the supporting body when the detecting film is mounted on the supporting body and the service environment temperature of the optical sensor to apply tension to the detecting film by a thermal deformation of the supporting body.例文帳に追加

また、検知膜と支持体とを熱膨張係数の異なる物質から形成し、支持体に検知膜を設置した時の支持体の温度と、光学方式センサの使用環境温度との間に温度差を設け、支持体の熱変形により検知膜に張力を付与する。 - 特許庁

On the other hand, when the control dot sequence of a B spline curve representing the shape of the object to be tracked is represented by the linear sum of the control dot sequence of the B spline representing a plurality of prepared reference shapes, particles are distributed in the space of the set of coefficients on each control dot sequence (S26).例文帳に追加

一方、追跡対象の形状を表すＢスプライン曲線の制御点列を、あらかじめ準備した複数の基準形状を表すＢスプライン曲線の制御点列の線形和で表現する際に各制御点列にかかる係数のセットの空間にパーティクルを分布させる（Ｓ２６）。 - 特許庁

The capacitor 24 is the so- called 'plastic film capacitor' and uses a heat-resistant film, such as the heat- resistant polypropylene film which expands thermally, in such a way that the sum of the coefficients of thermal expansion in the longitudinal and transversal directions becomes 4% or smaller at 120°C as a dielectric film.例文帳に追加

コンデンサ２４は、いわゆるプラスチックフィルム・コンデンサで、誘電体として使用されるフィルムとして、１２０℃における長手方向と幅方向の熱収縮率の和が４％以下となる耐熱性フィルム、例えば耐熱性のポリプロピレンフィルムを用いている。 - 特許庁

In a method of installing a jig such as a chuck at an end portion of an output shaft 1 of a motor, the material of the output shaft 1 and the material of the jig 2 is made to have different linear expansion coefficients, and an end of the output shaft 1 and the jig 2 are united by shrinkage fitting.例文帳に追加

モータの出力軸１の端部にチャックなどの治具を装着する方法において、出力軸１の材料と治具２の材料をそれぞれ線膨張係数の異なる材料とし、出力軸１端と治具２を焼き嵌めで結合するものである。 - 特許庁

An audio canceler 20 acquires audio signals X_L(t) and X_R(t) of respective channels, which are subjected to convolutional operation using filter coefficients W_L[K] and W_R[k] to generate noise-eliminated signals U_L(t) and U_R(t) by adaptive filters 23L and 23R.例文帳に追加

オーディオキャンセラ２０は、各チャンネルのオーディオ信号Ｘ_L（ｔ），Ｘ_R（ｔ）を取得し、これをフィルタ係数Ｗ_L［ｋ］，Ｗ_R［ｋ］にて畳み込み演算することにより、適応フィルタ２３Ｌ，２３Ｒにて雑音除去信号Ｕ_L（ｔ），Ｕ_R（ｔ）を生成する。 - 特許庁

To provide a glass substrate for display, which is not thermally deformed even if it is fired at 650-700°C, has a coefficient of thermal expansion matching with the coefficients of thermal expansion of various films formed thereon, and can be lightened in weight and upsized.例文帳に追加

６５０〜７００℃で焼成されても熱変形が起こらず、ガラス基板上に形成される種々の膜の熱膨張係数と整合する熱膨張係数を有し、軽量化、大型化が可能なディスプレイ用ガラス基板を提供することである。 - 特許庁

At this time, the color reproduction characteristic correction unit 20 presets weighting coefficients to be used for correcting color values of the printing machine based on an index related to the continuity of gradation in color data of a color image subjected to color conversion by a device link color conversion unit 15.例文帳に追加

このとき色再現特性修正部２０が印刷機の色値を修正するために用いられる重み係数を、デバイスリンク色変換部１５により色変換されたカラー画像の色データにおける階調の連続性に関する指標に基づいて予め設定しておく。 - 特許庁

Auxiliary winding is installed in a step-up transformer in the inverter circuit, the coupling coefficients of first winding, second winding, and the auxiliary winding are set so as to be similar, and even if the inverter circuit varies conversion power, the power source of the control circuit is stabilized.例文帳に追加

インバータ回路に備えられた昇圧トランスに補助巻線を設け、１次巻線、２次巻線と補助巻線の相互の結合係数を相等しくなるように設定し、インバータ回路が変換電力を可変しても制御回路の電源を安定化する。 - 特許庁

With respect to a group of products designated by a manufacture history analysis result display means 400, an analysis support control means 200 displays any of the basic statistics selected and a scatter plot (including correlative coefficients) of a characteristic test value on the manufacture history analysis result display means 400.例文帳に追加

分析支援制御手段200は、製造履歴分析結果表示手段400で指定された製品群に関して、選択されたいずれかの基本統計量と特性試験値の散布図(相関係数も含む)を製造履歴分析結果表示手段400に表示する。 - 特許庁

The lengths A, B in the press direction are determined respectively so that the upper/lower striking members 39, 40 have different linear expansion coefficients respectively and the total shrinkage calculated by adding each shrinkage is made nearly equal to the total shrinkage of the shrinkage of a pair of the dies and the shrinkage of the molding base material.例文帳に追加

上・下突き当て部材３９，４０は、各々線膨張係数が異なり、かつ、それぞれの収縮量を加算した合計収縮量が、一対の型の収縮量と成形素材の収縮量の合計収縮量と略同じになるように、プレス方向の長さＡ、Ｂがそれぞれ決められている。 - 特許庁

To minimize a gap between a covering resin surface and a heat radiating metal plate in order to improve adhesion to a bonding agent for connecting these elements for a semiconductor device in a shape with a recessed central area on the covering resin owing to a difference in contraction coefficients or the like.例文帳に追加

収縮率の差などが原因して被覆樹脂の中央部が凹んだ形状の半導体装置に対して、被覆用の樹脂表面と放熱用の金属板との間隙を最小限し、両者を接続するための接着剤との密着性を高めることを可能にする。 - 特許庁

An interference level discrimination unit 30 discriminates an interference level on the basis of the tap coefficients outputted respectively from the tap coefficient generators 29v, 29h to generate transmission power control information, and transmit the information to an opposite station (transmitter side) via a transmitter 31, a transmission reception multicoupler 22 and an antenna 21.例文帳に追加

干渉レベル判定器３０は、タップ係数生成器２９ｖ，２９ｈからそれぞれ出力されるタップ係数に基づき干渉レベルを判定して送信電力制御情報を生成し、送信器３１、送受共用器２２およびアンテナ２１を介して対向局（送信側）へ送信する。 - 特許庁

Thus the shearing strain γ applied to the solider layer under heat cycles, based on the difference between linear thermal expansion coefficients of works, is easily reduced and the heat resistance of the solder itself may be increased to satisfactorily prevent the breakdown (crack breakdown) of the solder layer.例文帳に追加

従って、被接合部材の線熱膨張係数の差に基づき熱サイクル下で、はんだ層に加えられる剪断歪みγを良好に軽減でき、かつはんだ自体の耐熱性を高くできるので、はんだ層の破壊（クラック破壊）を良好に防止できる。 - 特許庁

To provide an Al-SiC composite material capable of preventing deformation and damage by relaxing the strain of thermal stress caused by the diference in thermal expansion coefficients, easily joinable with the other parts at excellent strength, moreover having high thermal conductivity and suitable as a heat radiating substrate or the like.例文帳に追加

熱膨張係数差による熱応力の歪を緩和して変形や損傷を防止でき、他の部品と簡単に且つ優れた強度で接合できると共に、高熱伝導率であって、放熱基板等として好適なＡｌ−ＳｉＣ系複合材料を提供する。 - 特許庁

A reference proportional coefficient is previously found out by utilizing the fact that correction quantity for the position of an optical element constituting an optical system is proportional to a temperature change, one of the correction coefficients of each optical system is previously found out and the position of the optical element is corrected by multiplying the variation of temperature and the correction coefficient by the reference proportional coefficient.例文帳に追加

光学系を成す光学素子の位置の補正量が温度変化に比例することを利用し、標準の比例係数を求めておくとともに個々の光学系の補正係数を１つ求めておいて、温度の変化量と補正係数とを標準の比例係数に乗じて光学素子の位置を補正する。 - 特許庁

Whether or not it is possible for its own vehicle to avoid an obstacle only by a braking operation is decided under the consideration of road surface friction coefficients, the road surface information of road surface gradient and the relative motion of its own vehicle and the obstacle, and the status of the avoiding operation of its own vehicle to the obstacle is decided.例文帳に追加

路面摩擦係数、路面勾配の路面情報、自車両と障害物の相対的な運動を考慮し自車両が制動操作のみで障害物を回避できるか判定し、自車両の障害物に対する回避操作の状態を判定する。 - 特許庁

A value d=s/m is computed based on the sum of the coefficients in the division areas with the detecting means obtaining the detection signal (ON) belonging thereto, and the number of the detecting means 6 obtaining the detection signal (ON), when contacting with the operation body, and the value d is determined as the operation position by the operation body.例文帳に追加

操作体が触れたときに、検知信号（ＯＮ）を得た検知手段が属する区分領域の係数の総和ｓと、検知信号（ＯＮ）が得られた検知手段６の数ｍとからｄ＝ｓ／ｍを演算し、このｄが、操作体による操作位置と判別される。 - 特許庁

Consequently, the occurrence of a strain caused by the difference between the coefficients of thermal expansion of the body 20 and can 30, both of which are made of different materials, can be reduced, because the contact area between the body 20 and can 30 is reduced and the fluctuation of ambient temperature is hardly transmitted to the body 20.例文帳に追加

ボディ２０とシールドキャン３０の接触面積が低減し、ボディ２０に周囲温度の変化を伝え難くすることができて、異種材料からなるボディ２０とシールドキャン３０の熱膨張率の差に起因する歪の発生を軽減することができる。 - 特許庁

A reference medium 18 as a quality standard for each kind of medium is recorded and reproduced for each of the drives 20-1 to 20-5, and threshold values 1 to 5 obtained by multiplying the characteristic values obtained as the results by predetermined coefficients, respectively, are stored in predetermined respective storage areas prepared in each drive.例文帳に追加

各ドライブ２０−１〜２０−５ごとに、各種メディアの品位基準となる基準メディア１８を記録再生し、その結果得られた特性値に所定の係数を乗じて得られた閾値１〜５を各ドライブに設けられた所定の記憶領域にそれぞれ格納しておく。 - 特許庁

The correction coefficients are calculated, based on the electric signals output by the photodetector unit 2, in such a condition that a plurality of correction samples each of which is mixed with one of the fluorescent coloring matters and whose mixed fluorescent coloring matters are different from each other, are irradiated with the light having respective wavelength values for exciting the fluorescent coloring matters.例文帳に追加

補正係数は、蛍光色素のいずれか一つが混合され、混合された蛍光色素が互いに異なる複数の補正用試料それぞれに対して、蛍光色素それぞれの励起波長の光を照射したときに、受光ユニット２が出力する電気信号に基づいて算出する。 - 特許庁

Process or system quantities (u_2, u_3, x_GC, x_LL, w_0) are measured repeatedly, at different times during operation of the plant, and a specific relational expression having linear parameters (θ_i) as coefficients of nonlinear expressions (ψ_i) of the process quantities is established by evaluating the measurements.例文帳に追加

プロセスまたはシステムの質（ｕ_２，ｕ_３，Ｘ_ＧＣ，Ｘ_ＬＬ，ｗ_ｏ）が、プラントの操業中の異なる時間に繰り返し測定され、そして、プロセス質の非線形式（φ_ｉ）の係数として線形パラメータ（θ_ｉ）を有する特定の関係式が、測定値を評価することにより作り出される。 - 特許庁

By multiplying the set of spectral reflectances for which the coefficients of the ratio of a plurality of stages are multiplied respectively with the respective spectral reflectances of C, M, Y and K inks with the spectral reflectance of a black point respectively, the spectral reflectance at the time of adding the C, M, Y and K inks to the ink of the black point is obtained.例文帳に追加

Ｃ、Ｍ、Ｙ、Ｋインクそれぞれの分光反射率にそれぞれ複数段階の割合の係数を掛けた分光反射率の組を、それぞれ黒点の分光反射率に掛け合わせることにより、黒点のインクにＣ、Ｍ、Ｙ、Ｋインクを加えたときの分光反射率を得る。 - 特許庁

The phosphor layer 4 has a structure in which a plurality of phosphor coated layers 5a, 5b,... having different light emitting colors are laminated and formed by corresponding to a plurality of radiation rays, and a plurality of these phosphor coated layers 5a, 5b,... have thickness corresponding to absorption coefficients of each radiation ray to be detected, respectively.例文帳に追加

蛍光体層４は複数の放射線に対応させて、発光色が異なる複数の蛍光体塗布層５ａ、５ｂ…を積層形成した構造を有し、かつこれら複数の蛍光体塗布層５ａ、５ｂ…はそれぞれ検出対象となる各放射線の吸収係数に応じた厚さを有する。 - 特許庁

Then, a filter coefficient updating part 170 is configured to update filter coefficients (a) and φ of the adaptive filter of a control signal y on the basis of an updated value to be calculated from the estimate Gh of the transfer function in the temperature range in which the detected temperature T is included and a residual signal e.例文帳に追加

そして、フィルタ係数更新部１７０は、検出温度Ｔが含まれる温度範囲における伝達関数の推定値Ｇｈと残留信号ｅとにより算出される更新値に基づいて、制御信号ｙの適応フィルタのフィルタ係数ａ、φを更新する。 - 特許庁

An expression, representative of the variation rate ΔIdsat/Idsat of saturation current value being inversely proportional to the value obtained by multiplying the gate projection length E1 and the gate width Wg of a transistor by coefficients, is employed as a model expression, and modeling is performed for the transistor characteristics that depend on the gate projection length.例文帳に追加

飽和電流値の変化率ΔＩｄｓａｔ／Ｉｄｓａｔが、ゲート突き出し長Ｅ１とトランジスタのゲート幅Ｗｇに係数掛けした値に反比例することを表す式をモデル式とし、ゲート突き出し長に依存したトランジスタ特性についてモデリングを行う。 - 特許庁

A coating film in which a polytetrafluoroethylene(PTFE) resin is incorporated into at least one heat resistant resin is formed on a surface, a coating film in which no polytetrafluoroethylene is added into a heat resistant resin similar to that of the surface is formed on a back, and the friction coefficients of the coating films in the surface and the back are made at least 0.1.例文帳に追加

表面に少なくとも１種の耐熱性樹脂にポリテトラフルオロエチレン樹脂を配合した塗膜を形成し、裏面に表面と同系の耐熱性樹脂にポリテトラフルオロエチレンが無配合の塗膜を形成し、表裏面での対塗膜の静摩擦係数が０．１以上にした。 - 特許庁

Based on coefficients of linear expansion α,β and the temperature difference ΔT between a detected temperature T and a standard temperature TO, a Y-axis correction amount Δy is calculated by an arithmetic expression Δy=[L×(α-β)×ΔT], and the Y-axis correction amount Δy is stored in RAM 27 (S3).例文帳に追加

線膨張係数α，βと、検出温度Ｔと標準温度Ｔ０との温度差ΔＴに基づいてＹ軸補正量ΔｙがΔｙ＝［Ｌ×（α−β）×ΔＴ］の演算式により演算され、Ｙ軸補正量ΔｙがＲＡＭ２７に記憶される（Ｓ３）。 - 特許庁

A correcting part 106 uses parameter fitting to calculate a specular reflection factor K_s, a glossiness factor _p, and first and second diffuse reflection coefficients K_d1 and K_d2 so as to minimize an error between the reflection characteristic of the thread of the actual thing and the energy of reflected light obtained from a reflection function.例文帳に追加

修正部１０６は現物の糸の反射特性と、反射関数から得られる反射光のエネルギーとの誤差が最小となるように、パラメータフィッティングを用いて、鏡面反射係数Ｋ_ｓ、光沢係数ｐ、並びに第１及び第２の拡散反射係数Ｋ_ｄ１，Ｋ_ｄ２を算出する。 - 特許庁

To provide a composition having excellent thermal conductivity and heat resistance, achieving the improvement of productivity because of being directly coated on a heating element or a radiator, and adjustable as a sealing material of different kinds of materials having different coefficients of linear expansion.例文帳に追加

熱伝導性、耐熱性に優れ、直接的に発熱体或いは放熱体に塗布できるため生産性の向上を達成させ、さらに線膨張率が異なる異種材料のシール材として適応する当該組成物を提供することを課題とする。 - 特許庁

In addition, since pull strength is secured by the non-pressed part of the tool, a drop in durability of the bonded part caused by a difference in linear thermal expansion coefficients between the tape 12 and the pad 14 is avoided by minimizing the thickness of the part of the bonded part where the tool is pressed.例文帳に追加

又、ツールの未押し当て部によってプル強度が確保されることから、接合部の、ツールを押し当てる部分については、極力厚みを減少させることにより、角断面のテープ１２とパッド１４との線膨張係数差に起因する、接合部の耐久性の低下が回避される。 - 特許庁

To provide a composite structure which is obtained by combining a core material and and a surface material consisting of a polycrystalline sintered compact or metal and having a wide difference in thermal expansion coefficients, and in which high hardness and high toughness are made compatible without producing peeling and cracks between the core material and the surface material.例文帳に追加

多結晶質焼結体または金属からなる大きな熱膨張係数差のある芯材と表皮材とを組み合わせた複合構造体において、芯材と表皮材との間に剥離やクラックを発生させることがなく、高硬度と高靭性を両立した複合構造体を提供する。 - 特許庁

When the layer having a thermal expansion coefficient gradually increasing the content toward the junction surface 10c is formed on the junction surface 10c side of the component 10 containing the low thermal expansion coefficient material as a main material, junction is not necessarily executed on junction surfaces having largely different thermal expansion coefficients.例文帳に追加

低熱膨張率材料を主材料とする部品１０の接合面１０ｃ側に、表面１０ｃに向かうほど熱膨張率が逓増する層が形成されていると、熱膨張率が大きく相違する接合面で接合する無理をしなくてもよくなる。 - 特許庁

The measured value Y of the displacement corresponding to the bolt axial tension occurring when a fastened body is fastened to an ultrasonic axial tension measuring device wholly with a bolt and a nut has a characteristic as the secondary function of the axial tension F: Y=BF+CF2, where B and C are inherent coefficients determined by the bolt.例文帳に追加

超音波軸力測定装置に、被締結体を総ねじボルト・ナットを用いて締結するとき発生するボルト軸力に応じた変位の測定値Ｙが、軸力Ｆの２次関数 Ｙ＝ＢＦ＋ＣＦ^2 （ここで、Ｂ，Ｃ：ボルトによって定まる固有の係数）となる特性を組み込んだ。 - 特許庁

The frequency shift, FIR filtering and a decimation of 4n can be collectively processed by embedding the constants in coefficients of a FIR filter, implementing a FIR filter calculation at every subsequent sampling data of 4n (n is a positive integer) and outputting data.例文帳に追加

さらに、この定数をＦＩＲフィルタの係数に埋め込んでおき、サンプリングデータが４ｎ（ｎは正の整数）だけ進む毎にＦＩＲフィルタの演算を行ってデータを出力することにより、周波数シフト、ＦＩＲフィルタ処理および４ｎのデシメーションを一括して処理することができる。 - 特許庁

To provide a jointed body constituted by jointing a plurality of members with different linear expansion coefficients to each other, having enhanced rigidity as a whole and preventing peeling with respect to thermal stress even if the jointed body is small and thin, and a fluid device.例文帳に追加

線膨張係数の異なる複数の部材を接合してなる接合体の全体としての剛性を高めると共に、小型・薄型であっても熱応力に対する剥離が生じにくくした接合体の提供と、流体機器の提供とを図る。 - 特許庁

Then, the most strict variance quantity of two signals under the most strict operation conditions is searched based on the delay value and the random variance quantity, and respective variance coefficients are assigned to each gate based on the most strict variance quantity, and timing analysis is operated.例文帳に追加

そして、遅延値およびランダムばらつき量に基づき、最厳動作条件における２つの信号間の最厳ばらつき量を求め、最厳ばらつき量に基づいて、ゲート回路ごとに個別ばらつき係数を割り当て、タイミング解析を行なう。 - 特許庁

A parametric multichannel decoding device according to the present invention employs real-number values as at least one or more of filter coefficients that an analyzing filter, an all-pass filter, and a synthesizing filter use to greatly reduce the operation amount and memory capacity.例文帳に追加

上述の課題を解決するため、本発明のパラメトリックマルチチャンネル復号装置は、分析フィルタ、オールパスフィルタ、合成フィルタが用いるフィルタ係数の少なくとも一つ以上を実数値にすることにより、演算量およびメモリ容量を大幅に削減した。 - 特許庁

Prior to low-pass filtering, edge information is read in about a plurality of pixels, filter coefficients by which pixel values at edges are to be multiplied are reduced, and the filter coefficient reductions are added to a filter coefficient by which a reference pixel is to be multiplied.例文帳に追加

ローパスフィルタ処理を行うのに先立ち、複数の画素のエッジ情報を読み込み、エッジである画素値に乗じるフィルタ係数を減少させ、そして、減少させたフィルタ係数分を基準画素に乗じるフィルタ係数に加算させる。 - 特許庁

The control circuit 78 samples the detected signal output from the detector 76 under regular operation and computes a threshold (upper limit value) by multiplying average value Y of sampled values by arbitrary coefficients α when a threshold setting switch 48 is turned on.例文帳に追加

制御回路７８は、閾値設定スイッチ４８がオンに操作されると、正常動作時に検波器７６から出力された検出信号をサンプリングし、サンプリング値の平均値Ｙに任意の係数αを掛けて閾値（上限値）を演算する。 - 特許庁

Both of starting electric power and power consumption are reduced by the refrigerator oil composition to achieve high-level energy saving because the both coefficients of the static friction and the dynamic friction at the sliding part of the refrigerant-compressor or the like can be reduced.例文帳に追加

本発明の冷凍機油組成物によれば、冷媒圧縮機等の摺動部における静止摩擦係数及び動摩擦係数の双方を十分に低下させることができるため、起動電力及び運転中の消費電力の双方を削減し、高水準の省エネルギー性を達成することができるようになる。 - 特許庁

In the method for manufacturing an ink jet head by bonding two members for the ink jet head having different coefficients of thermal expansion through thermosetting adhesive, they are heated from the side of a member having a lower coefficient of thermal expansion.例文帳に追加

熱膨張率の異なる２つのインクジェットヘッド用部材を熱硬化性型接着剤で接合して製造するインクジェットヘッドの製造方法において、前記熱膨張率の低い方のインクジェットヘッド用部材の側から加熱する。 - 特許庁