「production coefficient」に関連した英語例文の一覧と使い方(2ページ目) - Weblio英語例文検索

To provide a sliding member which can be treated at a low cost without using a vacuum chamber, can stably maintain a low friction coefficient, and has excellent wear resistance and seizure resistance, and to provide a production method therefor.例文帳に追加

真空チャンバを用いずに低コストで処理でき、低い摩擦係数を安定して維持でき、耐摩耗性と耐焼付き性に優れた摺動部材とその製造方法を提供する。 - 特許庁

To provide a production method which can prevent edge cracks of a Cr-Cu alloy sheet having characteristics such that the coefficient of thermal expansion is low and also thermal conductivity is high.例文帳に追加

熱膨張率が小さく、かつ熱伝導率が大きいという特性を有するＣｒ−Ｃｕ合金板の耳割れを防止できる製造方法を提供する。 - 特許庁

To provide a high stiffness low thermal expansion ceramic member which has high stiffness in a desired direction while maintaining a sufficiently low coefficient of thermal expansion and which is suitably used as a member for a semiconductor production device, or the like.例文帳に追加

十分に小さい熱膨張係数を維持しつつ、所望の方向の剛性を高くすることができ、半導体製造装置用部材等として好適な高剛性低熱膨張セラミックス部材を提供すること。 - 特許庁

To provide a method for producing an aluminum matrix composite material which has the characteristics of high cutting workability, a low thermal expansion coefficient, high thermal conductivity, low density and a low production cost.例文帳に追加

切断加工性が高く、低熱膨張係数・高熱伝導度・低密度・低生産費の特性を有するアルミニウム基地複合材料の製造方法を提供する。 - 特許庁

A control part 20 sets a production coating condition 35 according to a test coating condition 32 and a previously calculated coating condition coefficient 34, and outputs it to a pressure adjustment part 50.例文帳に追加

制御部２０は、試験塗布条件３２と、予め算出された塗布条件係数３４と、に基づいて、生産塗布条件３５を設定し、圧力調整部５０に出力する。 - 特許庁

Moreover, the controller calculates the number of days having passed after the recording paper was produced on the basis of the present date and the production date of the recording paper, and reads out a sensitivity correction coefficient for each of Y, M and C corresponding to the number of days from a sensitivity correction LUT 81 for the change with time.例文帳に追加

また、現在の日付と記録紙の製造年月日とから製造経過日数を算出し、これに対応するＹ，Ｍ，Ｃ毎の感度補正係数を経時用感度補正ＬＵＴ８１から読み出す。 - 特許庁

In addition, you can identify the repercussion effect of demand onproduction such as “how much production will be induced directly/indirectly in each industry if one unit of demand in a certain industry is generated” by creating a coefficient based on the table.例文帳に追加

また、表から係数を作成し「ある産業の需要が1単位発生した場合、各産業が直接・間接的にどれだけ生産が誘発されるか」といった需要が生産に及ぼす波及効果がわかります。 - 経済産業省

According to the SME Agency's Industry Statistics by Size, SMEs' production inducement coefficient for private consumption demand is higher than that for large enterprises, indicating that SMEs are relatively more dependent on private consumption demand例文帳に追加

中小企業庁「規模別産業連関表」によると、中小企業における民間消費需要の生産誘発係数は大企業に比べて大きく、中小企業は相対的に民間消費需要に依存していると考えられる。 - 経済産業省

To provide a covalent bond ceramic member capable of obtaining a stable low friction coefficient while the wear resistance of a shaft sleeve and a bearing bush composing the sliding part of a bearing is made high, having good solid lubricity so as to be capable of securing a low friction coefficient even in the case the sliding face is contacted in a plating bath and capable of production at a low cost by atmospheric sintering.例文帳に追加

軸受の摺動部を構成する軸スリーブ、軸受ブッシュの両方を高耐摩耗性としながらも安定した低摩擦係数が得られ、めっき浴中において摺動面が接触しても低い摩擦係数が確保可能に良好な固体潤滑性を有し、かつ常圧焼結による低コストでの製造が可能な共有結合セラミックス部材とする。 - 特許庁

To obtain a polyimide resin composition for electrodeposition containing a solvent-soluble heat-resistant polyimide resin having a low coefficient of thermal expansion, to provide a method for producing a molding using the resin composition and to obtain a heat-resistant polyimide resin molding having a low coefficient of thermal expansion obtained by the production method, preferably a solvent-insoluble molding.例文帳に追加

溶媒可溶性でかつ低熱膨張率である耐熱性ポリイミド樹脂を含む電着用ポリイミド樹脂組成物を提供し、該樹脂組成物を用いた成形体の製造方法を提供し、該製造方法により得られた低熱膨張率で、耐熱性ポリイミド樹脂成形体、好ましくは溶媒不溶性の成形体を提供する。 - 特許庁

To provide a piezoelectric ceramic composition which, when fired at a relatively low temperature at which the evaporation of PbO can be avoided, can produce at a low production cost a piezoelectric ceramic having a high electromechanical coupling coefficient Kp and a high Curie temperature Tc.例文帳に追加

ＰｂＯの蒸発を回避できる比較的低い温度での焼成によって高い電気機械結合係数Ｋｐ及び高いキュリー温度Ｔｃを有する圧電磁器を低い製造コストで製造することのできる圧電磁器組成物を提供すること。 - 特許庁

To provide an efficient production method of a fluoropolymer which has high polymerization rate without using CFC and HCFC with high ozone destruction coefficient and whereby the mechanical characteristics, solvent resistance and chemical resistance of a coated film formed by using the obtained polymer are excellent.例文帳に追加

重合速度が大きくて、かつオゾン破壊係数の大きなＣＦＣ、ＨＣＦＣを使用することなく、得られた含フッ素重合体を用いて形成した塗膜の力学特性、耐溶剤性、耐薬品性に優れる含フッ素重合体を効率よく製造できる方法を提供する。 - 特許庁

To provide a polyimide film having excellent heat resistance, excellent bending resistance, a small linear expansion coefficient, and further a high elastic modulus, which can be suitably used for production of a flexible device; and to provide a laminate of the polyimide film and an inorganic substrate.例文帳に追加

フレキシブルデバイスの生産に好適に用いることのできる、優れた耐熱性と優れた耐折性、線膨張係数が小さく、更には高い弾性率を有するポリイミドフィルム、ポリイミドフィルムと無機基板との積層体を提供する。 - 特許庁

To provide a heat dissipation substrate being used in a substrate for mounting a semiconductor in which high density can be attained at a relatively low sintering temperature while ensuring required thermal expansion coefficient and thermal conductivity using a relatively simple production process.例文帳に追加

半導体搭載用基板に使用される放熱基板に関するもので、比較的低い燒結温度で高密度を得ることができ、しかも必要な熱膨張係数と熱伝導度を備え、製法が比較的簡単な放熱基板材料を提供すること。 - 特許庁

In the wastewater treatment method, the wastewater derived from the aromatic carboxylic acid production process is brought into contact with a chelate resin to recover the heavy metal compounds contained in the wastewater into the chelate resin, and the chelate resin comprises particles having a uniform coefficient of 1.4 or less.例文帳に追加

芳香族カルボン酸製造プロセス由来の排水をキレート樹脂に接触させて該排水中に含有する重金属化合物を該キレート樹脂に回収する排水の処理方法であって、該キレート樹脂は、均一係数が１．４以下の粒子であることを特徴とする排水の処理方法。 - 特許庁

To provide a backlight for multi-directional lighting which can reduce the number of light-emitting diodes, can enhance the average color rendering index and an uniformity coefficient of brightness, and further, can markedly reduce the cost through simple production.例文帳に追加

本発明は、発光ダイオードの数を節約することができるとともに、平均演色評価数と明るさの均一度を高めることができ、さらに製造が簡単でコストを大幅に下げることが可能な、多方向採光のバックライトを提供する。 - 特許庁

According to the injected fuel amount, the appropriate value of the time of the center of gravity of combustion of the heat production coefficient produced by the combustion in a combustion chamber is calculated, and it is determined whether or not the actual time of the center of gravity of combustion generally matches the calculated time of the center of gravity of combustion.例文帳に追加

燃料噴射量に応じて、燃焼室内での燃焼に伴う熱発生率の燃焼重心時刻の適正値を算出し、実際の燃焼重心時刻がこの算出された燃焼重心時刻に略一致するか否かを判定する。 - 特許庁

To provide a composition for glass fiber which has a low dielectric constant ε and a low linear thermal expansion coefficient α, exhibits high performance in an elastic modulus E, prevents thread breakage caused by the production of devitrified crystals and the intrusion of hollow fiber, and suppresses the variation in fiber diameter, to provide glass fiber, and to provide a glass fiber sheet-like product.例文帳に追加

低い誘電率εを有し、線熱膨張係数αが低く、弾性率Ｅが高い性能を発揮し、失透結晶物の生成による糸切れ、ホローファイバーの混入を防ぎ、繊維径のバラツキを抑制できるガラス繊維用組成物、ガラス繊維とガラス繊維シート状物を提供する。 - 特許庁

The ceramic member for semiconductor production equipment comprises a compact ceramic containing lithium aluminosilicate and calcium silicate as main components or a compact ceramic having a thermal expansion coefficient of -7.0 to 7.0×10-6/°C at a temp. of room temperature to 400°C and a Vickers hardness of 3.0-7.0 GPa.例文帳に追加

リチウムアルミノけい酸塩およびけい酸カルシウムを主要組成とする緻密質セラミックス、または室温〜４００℃における熱膨張係数が−７．０〜７．０×１０^−６／℃、ビッカース硬度が３．０〜７．０ＧＰａである緻密質セラミックスにより半導体製造機器用セラミックス部材を構成する。 - 特許庁

To provide a piezoelectric ceramic composition which does not so much deteriorate excellent specific dielectric constant ε_r, electromechanical coupling coefficient K_p and limited vibration speed V_max, has less characteristics change with temperature and also is capable of burning at a low temperature in a PZT-PMS-based material, and to provide a method for production of piezoelectric ceramics.例文帳に追加

ＰＺＴ−ＰＭＳ系材料において、優れた比誘電率ε_r、電気機械結合係数Ｋ_p、限界振動速度Ｖ_maxをあまり劣化させることなく、しかも特性の温度変化が少なく、低温焼成が可能な圧電磁器組成物及び圧電磁器の製造方法を提供する。 - 特許庁

This correction coefficient α is calculated, based on an arrival scheduled time T(k) to a progress k of the manufacturing process of each lot, existing in a production line at a certain T and the operation information of a facility x configuring the manufacturing process and a facility halt completion time Tc(x).例文帳に追加

この補正係数αは、ある時刻Ｔにおける生産ラインに存在する各ロットの製造工程の工程ｋへの到着予定時刻Ｔ（ｋ）と、製造工程を構成する設備ｘの稼動情報と、設備停止完了時刻Ｔｃ（ｘ）とに基づいて算出される。 - 特許庁

To provide a piezoelectric ceramic composition which is lead-free, has high piezoelectric characteristics and high dielectric characteristics, and is excellent in, especially, at least one of a piezoelectric constant d_31, an electromechanical coupling coefficient Kp, and a relative permittivity, to provide its production method, and to provide a piezoelectric element and a dielectric element using the piezoelectric ceramic composition.例文帳に追加

鉛を含まず，高い圧電特性及び誘電特性を有し，特に圧電ｄ_31定数，電気機械結合係数Ｋｐ，及び比誘電率のいずれか一つ以上に優れた圧電磁器組成物及びその製造方法，並びに該圧電磁器組成物を利用した圧電素子及び誘電素子を提供すること。 - 特許庁

When a synthesis of an organic compound such as an aromatic compound promoted by microwave irradiation is carried out by irradiation with microwaves, the reaction is carried out by adding a compound having a large dielectric loss coefficient to improve the production efficiency (yield of a target product obtained by using given electric power).例文帳に追加

マイクロ波照射により促進される芳香族化合物等の有機化合物の合成反応をマイクロ波照射下で行う際、誘電損失係数が大きい化合物を添加して反応を行い、生産効率（一定の電力エネルギーを用いて得られる目的生成物の収量）を向上させる。 - 特許庁

To provide a PTC (positive temperature coefficient) ink composition capable of consecutively forming a good continuous film and of reducing a printing cost, excellent in printing quality and production efficiency, thus suitable for industrialization; and a PTC material and a sheetlike heating element using the composition.例文帳に追加

良好な連続被膜を連続的に形成でき、生産効率に優れ工業化に適しており、且つ印刷品質に優れ、印刷コストを低減できるＰＴＣインク組成物及びこれを用いたＰＴＣ材料及び面状発熱体を提供する。 - 特許庁

To provide a polarizer protection film having excellent transparency, moisture resistance and heat resistance, having a small photoelastic coefficient, and moreover, excellent film conveying property, film processability and rework property in a production line, and to provide a polarizing plate excellent in optical characteristics and durability.例文帳に追加

透明性、耐湿性、耐熱性に優れ、かつ光弾性係数が小さく、しかも生産ラインでのフィルム搬送性およびフィルム加工性、リワーク性に優れた偏光子保護フィルム、並びに光学特性および耐久性に優れた偏光板を提供する。 - 特許庁

For the first product group and the second product group among a plurality of products which are sequentially processed in production processes, the correlation coefficient between data on the former group and data on the latter group is computed (S403), the former and latter data being obtained through inspections using inspection items, which are different for each data group, in their inspection processes.例文帳に追加

生産プロセスで順次処理される複数の生産品のうち第１の生産品群と第２の生産品群とについて、それぞれ検査工程における互いに異なる検査項目で得られたデータ同士の相関係数を算出する（Ｓ４０３）。 - 特許庁

To provide a production method for a dielectric porcelain composition whereby the absolute value of temperature coefficient (τf) of resonance frequency is surely lowered to a small value (a value nearing to zero ppm/°C) by a simple method in order to widen the application of the composition as a dielectric material for high frequency waves, such as microwaves and millimeter waves.例文帳に追加

マイクロ波、ミリ波などの高周波用誘電体材料としての用途の拡大を図るべく、共振周波数の温度係数（τｆ）の絶対値を簡易な方法でかつ確実に小さな値（より零ｐｐｍ／℃に近づく小さな値）とすることができる誘電体磁器組成物の製造方法を提供する。 - 特許庁

To provide a colorant-containing curable composition excellent in the molar absorption coefficient and chromatic valence of a dye, light and heat resistances and pattern forming property (developability), and prevention of color mixing/color-missing in a production process, and to provide a color filter and a method for manufacturing the same.例文帳に追加

染料のモル吸光係数や色価、耐光性、耐熱性、およびパターン形成性（現像性）、作製プロセス上の混色／色抜け防止に優れた着色剤含有硬化性組成物、並びに、カラーフィルタおよびその製造方法を提供する。 - 特許庁

To provide a silicon crystal of which the change in resistivity in a longitudinal direction may be decreased even when a dopant with a small segregation coefficient is added and of which the production cost may be reduced by enhancing its yield, provide a silicon crystal wafer, and provide a method for producing the silicon crystal.例文帳に追加

偏析係数の小さなドーパントを添加しても、シリコン結晶インゴットの長さ方向における抵抗率の変化を小さくでき、収率を高くして製造コストを低減できるシリコン結晶及びシリコン結晶ウエーハ並びにその製造方法を提供する。 - 特許庁

In the image forming apparatus using the developing sleeve 2032, the high conveyability is obtained and the high durability is demonstrated even when printing is performed by using a two-component developer which is produced by for example, an EA production process, and containing a nearly spherical carrier of 105 to 115 in shape coefficient.例文帳に追加

現像スリーブ２０３２を用いた画像形成装置においては、例えばＥＡ製法により製造され、形状係数が１０５以上１１５以下の真球に近いキャリアを含む二成分現像剤を用いてプリントを行った場合であっても高い搬送性が得られ、かつ高い耐久性が示される。 - 特許庁

To provide a method for manufacturing a toothed belt capable of reducing a frictional coefficient of a contact surface of the belt with a pulley while obtaining a high energy efficiency or a high production efficiency without advancing aging of a rubber without reducing adhesive properties of a toothed cloth with a surface of a tooth or a tooth space.例文帳に追加

歯部や歯溝の表面に対する歯布の接着性を低下させることなく、またゴムの老化を進行させることなく、しかもエネルギー効率や生産効率を高く得ながら、プーリに対する接触面の摩擦係数を小さくすることができる歯付ベルトの製造方法を提供する。 - 特許庁

To obtain an insulating resin composition for printed-wiring boards which maintains stabilized material characteristics for a long period of time in its production and has excellent properties such as high adhesion of circuit patterns, formability of fine patterns, high heat resistance, and a low coefficient of thermal expansion.例文帳に追加

製造にあたって長時間安定した材料特性を維持し、回路パターンの高密着性、微細パターン形成性、高耐熱性、低熱膨張率などに優れた特性の多層プリント配線板用絶縁性樹脂組成物及び多層プリント配線板を提供する。 - 特許庁

To provide a method for surface treating a metallic can by which the coefficient of dynamic friction in a metallic can is effectively reduced, its carriability in production can be improved, also, the need of waste water treatment is eliminated, and the amount of a slidability improving agent to be used can remarkably be reduced.例文帳に追加

金属缶の動摩擦係数を効果的に低減し、金属缶製造時の搬送性を向上させることができ、かつ、廃水処理の必要がなく、滑り性向上剤の使用量を大幅に削減することができる金属缶の表面処理方法を提供する。 - 特許庁

To obtain a polarizer protective film which has transparency, moisture resistance, heat resistance, and high stiffness, of which the photoelastic coefficient is small, further the vulnerability is improved, and of which the film transferability in a production line, the film workability, and the reworking property are excellent, and a polarizing plate which is excellent in optical characteristics and durability.例文帳に追加

透明性、耐湿性、耐熱性、高い剛性を有し、光弾性係数が小さく、しかも脆さが改善され、生産ラインでのフィルム搬送性及びフィルム加工性、リワーク性に優れた偏光子保護フィルム及び光学特性、耐久性に優れた偏光板を得る。 - 特許庁

The support for printed wiring board production consists of a rolling copper alloy foil containing 0.1 mass% or more of Mg wherein the concentration of Mg is 0.2 at% or more and the concentration of O is 10 at% or more in the surface layer when quantitative analysis is performed by sensitivity coefficient method of XPS.例文帳に追加

０．１質量％以上のＭｇを含有する圧延銅合金箔からなり、ＸＰＳの感度係数法による定量分析において、表層のＭｇ濃度が０．２ａｔ％以上、かつＯ濃度が１０ａｔ％以上であるプリント配線板製造用支持体である。 - 特許庁

To obtain an epoxy resin composition capable of improving production efficiency by completing its curing at a low temperature and in a short time while maintaining the physical properties such as glass transition temperature and linear expansion coefficient, and an insulating base plate by using the same composition.例文帳に追加

ガラス転移温度および線膨張率の物性を維持しながら、低温、かつ、短時間で硬化を完結させて生産効率を向上させることができるエポキシ樹脂組成物およびこのエポキシ樹脂組成物を用いた絶縁基板を提供することにある。 - 特許庁

To provide the production method of slag crushed stone, by which the dust preventing measure in the transportation and the mixing is dispensed with, the blending of carbon-containing waste for preventing the solidification is unnecessary, and the crushed stone having small coefficient of expansion is obtained by uniformizing the water content during aging.例文帳に追加

輸送時および混合時の発塵対策が不要であり、固結防止用の炭素含有廃棄物を配合する必要もなく、エージング中の水分含有率を均一にして膨張率の小さいスラグ砕石を得ることができるスラグ砕石の製造方法を提供する。 - 特許庁

To provide a magnetostriktion controlling alloy sheet low in thermal expansion coefficient, excellent in magnetic characteristics, high in Young's modulus even after blackening treatment, and very suitable for highly fine shadow mask, to provide a production method of this alloy sheet, and to provide parts for color Braun tube such as a shadow mask.例文帳に追加

熱膨張係数が低く、優れた磁気特性を有すると共に、黒化処理後においても高いヤング率を有する高精細シャドウマスク用として好適な磁気歪制御型合金板及びその製造方法並びにシャドウマスク等のカラーブラウン管用部品を提供する。 - 特許庁

The mobile electronic equipment 1 comprises a heat source 10 for generating heat during production, storage, or consumption of electric power, a housing base material 21 for internally housing the heat source 10, and a radiating film 22 provided on the external surface of the housing base material 21 and having a higher radiating coefficient than that of the housing base material 21.例文帳に追加

電力の生産、蓄電または消費に伴い熱を発生する熱源１０と、内部に熱源１０を収容する筐体基材２１と、筐体基材２１の外表面に設けられ、筐体基材２１よりも輻射率が高い輻射膜２２とを備えることを特徴とする携帯電子機器１である。 - 特許庁

To provide a sintered friction material favorable in aspects of environmental protection because of no designated chemical substance by the PRTR (Pollutant Release and Transfer Register) law contained at all and capable of avoiding production of friction of the same kind in a high-temperature region, preventing deterioration of friction coefficient, raising lubricity and preventing the occurrence of a large amount of sparks.例文帳に追加

ＰＲＴＲ法の指定化学物質をまったく含まないことで環境保護の面で好ましいと共に、高温域における同種摩擦の発生を回避して摩擦係数の低下を防止するとともに、潤滑性を高めて多量の火花の発生を防止することができる焼結摩擦材を提供する。 - 特許庁

To provide a production method of crystallized glass capable of reducing the fluctuation of coefficient of thermal expansion corresponding with respect to the fluctuation of crystallizing temperature by retaining material glass at a specific nucleation temperature and then retaining at the crystallizing temperature to crystallize at least an α-quartz phase.例文帳に追加

原ガラスを核形成温度で保持し、次いで結晶化温度で保持して原ガラスを結晶化させ、この際少なくともα−石英相を析出させるのに際して、結晶化温度の変動に対する熱膨張係数の変動を少なくする。 - 特許庁

To provide a selection method of molded soft polyurethane foam without big change in hardness or repulsive elasticity coefficient when used for a seat cushion pad of automobiles and maintaining similar level of resonant oscillation rate with a declined magnification at about 2-4 Hz and a process for production of the molded soft urethane foam.例文帳に追加

自動車用のシートクッションパッドとして使用したときに、硬度や反発弾性率を大きく変動させることなく、共振振動数を同等レベルに保ちつつ、２〜４Ｈｚ付近での共振倍率を低下させた軟質ポリウレタンフォーム成型体の選択方法、及びに軟質ポリウレタンフォーム成型体の製造方法を提供する。 - 特許庁

To provide a mold for molding an optical element which has low reactivity with an optical element material, allows to reduce a friction coefficient between the optical element material and the surface layer thereof, has excellent adhesion between the base material and the surface layer thereof, and also has excellent mold releasability and durability, a method for producing an optical element using the mold for molding an optical element, and an optical element obtained by the production method.例文帳に追加

光学素子材料との反応性が低く、光学素子材料と光学素子成形用型の表面層との摩擦係数を下げることができ、光学素子成形用型の基材と表面層との密着性に優れ、かつ、離型性と耐久性に優れる光学素子成形用型、並びに該光学素子成形用型を用いた光学素子の製造方法、及び該製造方法により得られる光学素子の提供。 - 特許庁

To provide a thermosetting resin composition containing a polyimide resin and an epoxy resin and capable of obtaining a cured form having excellent heat resistance, a low dielectric constant and a low dielectric loss tangent, advantageous mechanical strength such as tensile strength and tensile elongation, and a small linear expansion coefficient; and a production method of a polyimide resin composition used in this thermosetting resin composition.例文帳に追加

ポリイミド樹脂とエポキシ樹脂を含有する熱硬化性樹脂組成物であって、耐熱性に優れ、誘電率と誘電正接が低く、しかも、引張強度、引張伸度等の機械物性の良好で、線膨張係数の小さい硬化物が得られる熱硬化性ポリイミド樹脂組成物、及び、この熱硬化性樹脂組成物に用いるポリイミド樹脂組成物の製造方法を提供すること。 - 特許庁

The production method for the carbon composition material for the reducing atmosphere furnace is carried out by using metal Ta as a target material and the reactive gas containing C and forming the tantalum carbide coating film on the graphite substrate having the above thermal expansion coefficient as the characteristic value by an arc ion plating (AIP) type reactive vapor deposition method.例文帳に追加

また、本発明の還元性雰囲気炉用炭素複合材料の製造方法は、ターゲット材としての金属Ｔａ及びＣを含む反応ガスを使用してアークイオンプレーティング（ＡＩＰ）式反応性蒸着法により上記の熱膨張係数を特性値として有する黒鉛基材の表面に炭化タンタルの皮膜を形成する。 - 特許庁