| 例文 |
based referenceの部分一致の例文一覧と使い方
該当件数 : 4625件
In decode processing, in the basis of the time point of article detection (S100), a reference image is specified (S120), based on this reference image, an image to become a decode target is read out of the ring buffer (S150) and the information code is decoded (S160).例文帳に追加
デコード処理では、物品検知時点に基づいて(S100)基準画像を特定し(S120)、この基準画像に基づき、リングバッファからデコード対象となる画像を読み出し(S150)、情報コードをデコードする(S160)。 - 特許庁
When the lateral type screen is switched to the longitudinal type screen for instance, a CPU 1 obtains the longitudinal/lateral expansion rate of a present screen to the reference screen based on the longitudinal/lateral size of the present screen (longitudinal type screen) and the longitudinal/lateral size of the reference screen.例文帳に追加
CPU1は例えば、横型画面が縦型画面に切り替えられた際に、現画面(縦型画面)の縦横サイズと基準画面の縦横サイズに基づいて基準画面に対する現画面の縦横伸長率を求める。 - 特許庁
Only when the current value of the SOC is within a SOC control range (step S404), will the SOC be corrected in the direction of getting close to a reference SOC, based on the result of a comparison between a given reference voltage value and an open-circuit one (step S405).例文帳に追加
SOCの今回値がSOC制御範囲内にある場合にのみ(ステップS404)、所定の基準電圧値と前記開放電圧との比較結果に基づいてSOCを基準SOCに近づく向きに補正する(ステップS405)。 - 特許庁
These DC currents are compared with reference current I2 flowing a reference power supply circuit 47 by using a comparing means 18 to generate control voltage Ve based on the difference resulting from the comparison.例文帳に追加
圧電振動子の一方の駆動電極の出力電流を交流電圧に変換し、この交流電圧を、トランスミッションゲート51,56を交流電圧に同期してオン/オフさせることにより整流して、直流電流I_1AおよびI_1Bとする。 - 特許庁
A first hot-water filling control means 51 stores detection reference water level information S_base for indicating a detection reference water level based on a detection water level from a water level sensor Y in a storage part 61 any time, after first hot water filling processing.例文帳に追加
第1の湯はり制御手段51は、第1の湯はり処理後において、水位センサYからの検出水位に基づく検出基準水位を指示する検出基準水位情報S_baseを記憶部61に随時保存する。 - 特許庁
If determined that the number of detected persons is larger than the predetermined reference number of persons, the clipping number of images is decided according to the detected number of persons, and a plurality of images are clipped, based on the scope in which persons of a number less than the reference number of persons are taken.例文帳に追加
基準人数よりも多いと判定された場合、検出された人数に応じて画像の切り出し数が決められ、基準人数より少ない人数が写る範囲に基づいて複数の画像が切り出される。 - 特許庁
A pulse width judgment circuit 39 is supplied with rotational pulses, compares the pulse width of the rotational pulses with a reference pulse width corresponding to the reference number of revolutions of the motor 23, and outputs a logic selection signal based on the result of the comparison.例文帳に追加
パルス幅判定回路39には、回転パルスが供給され、回転パルスのパルス幅をモータ23の基準回転数に対応した基準パルス幅と比較し、その比較結果に基づくロジック選択信号を出力する。 - 特許庁
And, a reference position determining part 53 finds the reference position to a plurality of FPC on the conveyance tray 8, based on a plurality of object marks, in which the object mark which produces the position deviation is excepted from the four object marks.例文帳に追加
そして、基準位置決定部53では4個の対象マークから位置ズレが生じた対象マークを除外した複数の対象マークに基づいて搬送用トレイ8上の複数のFPCに対する基準位置が求められる。 - 特許庁
In the data analysis method in the total reflection spectroscopic measurement, a value q based on a ratio P of reference amplitude R_ref to sample amplitude R_sig and a phase difference Δ between a reference phase Φ_ref and a sample phase Φ_sig is found out.例文帳に追加
この全反射分光計測におけるデータ解析方法では、リファレンス振幅R_refとサンプル振幅R_sigとの比P、及びリファレンス位相Φ_refとサンプル位相Φ_sigとの位相差Δに基づく値qを求めている。 - 特許庁
Based upon lateral magnification prescribed by scaling of the object reference scale and scaling of the ocular reference scale led to the optical superposition match, actual magnification of the microscope at the zoom position is determined.例文帳に追加
前記光学的重畳一致に導かれた前記物体参照尺度のスケーリングと前記接眼レンズ参照尺度のスケーリングによって規定される横倍率に基づき前記ズーム位置における顕微鏡の実際倍率を決定する。 - 特許庁
Based on the positional relation between the first to M-th reference positions set within the grouping deciding picture and the indicated positions of the plurality of players, the plurality of players are grouped into the first to M-th groups corresponding to the first to M-th reference positions.例文帳に追加
グループ分け決定画面内に設定される第1〜第Mの基準位置と複数のプレーヤの指示位置との位置関係に基づき、複数のプレーヤを第1〜第Mの基準位置に対応する第1〜第Mのグループに分ける。 - 特許庁
The convergence control part detects an angular error where the reference pattern is distorted by the earth magnetic field, based on the difference between the datum position of the reference pattern and the maximum brightness measurement position, and controls a deflection circuit so as to compensate the angular error in question.例文帳に追加
コンバージェンス制御部は基準パターンの標準位置と最大輝度測定位置との差に基づき基準パターンが地磁界により歪んだ角誤差を検出し、該角誤差が補償されるよう偏向回路を制御する。 - 特許庁
In this case, when the reference image data or the interval to be used for the extraction of the image data is changed based on an instruction from a user, the display on the display part is changed by using the new reference and interval.例文帳に追加
ここで、上記画像データの抽出に用いられる基準の画像データまたは間隔がユーザからの指示に基づいて変更されると、新たな基準及び間隔により上記の表示が行われ表示部の表示が変更される。 - 特許庁
The plurality of players are divided into the first to the M-th group corresponding to the first to M-th reference position based upon the positional relationship between the first to M-th reference positions set in the grouping decision display screen and the designating positions of two or more players.例文帳に追加
グループ分け決定画面内に設定される第1〜第Mの基準位置と複数のプレーヤの指示位置との位置関係に基づき、複数のプレーヤを第1〜第Mの基準位置に対応する第1〜第Mのグループに分ける。 - 特許庁
To provide a method for calibrating acceleration by precisely acquiring the reference value of the output value of an acceleration sensor by a navigation apparatus for determining acceleration, based on the output and reference values of the acceleration sensor, and to provide the navigation apparatus.例文帳に追加
加速度センサの出力値と基準値とに基づいて加速度を求めるナビゲーション装置で、加速度センサの出力値の基準値を精度良く得ることによって加速度を較正する方法、及びナビゲーション装置を提供する。 - 特許庁
The absolute wavelength of the excimer laser beam is decided, based on the relative position of the reference beam and the line on the position sensor and detector corresponding to the wavelength of the excimer laser beam and the dispersion degree, and the known absolute wavelength of the reference beam.例文帳に追加
エキシマレーザ光線の絶対波長は、基準光線及びエキシマレーザ光線の波長と分散次数に対応するポジション感知検出器上のラインの相対位置と、基準光線の既知の絶対波長に基づいて決定される。 - 特許庁
An intake air amount for the reference condition is determined as a reference intake air amount by referring to the map based on a current rotational speed, a current gauge pressure, a current lift amount and a current phase.例文帳に追加
現在の回転数、吸気管のゲージ圧、吸気バルブのリフト量、および吸気バルブの位相に基づいて上記吸気量マップを参照し、該基準状態下における吸入空気量を、基準吸入空気量として求める。 - 特許庁
When the current of the inverter is reset to a sound state, the output 71 is stopped, and the counter 62 counts down a down counter reference signal 72 based on a reference decided by considering a temperature of the switching element of the inverter.例文帳に追加
インバータ電流が健全状態へ復帰すると出力71が停止され、インバータのスイッチング素子の温度を考慮に入れて決定された基準に基づくダウンカウンタ基準信号72により、カウンタ62をダウンカウントする。 - 特許庁
A burning formation point calculating section 18d processes the picture signal in an image region based on each of a plurality of points set on a reference ellipsoid determined by the three reference points so as to calculate out burning formation points forming a burning.例文帳に追加
バーニング構成点算出部18dは、3つの基準点で決定される基準楕円上に設定した複数点の各々に基づく画像領域内で映像信号を処理し、バーニングを構成するバーニング構成点を算出する。 - 特許庁
For connecting a slave unit 1 and a master unit 2 via a transmission path L, a color adjustment circuit 240 of the master unit 2 performs color adjustment based on a video reference signal generated by a reference signal generator 110 of the slave unit 1.例文帳に追加
伝送路Lを経由して子機1及び親機2を接続するにあたり、親機の色調整回路240は、子機の基準信号生成部110にて生成された映像基準信号に基づいて色調整を行う。 - 特許庁
To suppress the damage of a device in overheating exceeding a reference value to the minimum by setting the reference value of the heating temperature of a heater in each heating region of the heater, based on the width information of a recording material, thereby controlling heating of the heater.例文帳に追加
記録材の幅情報に基づきヒータの加熱温度の基準値をヒータの加熱領域ごとに設定し、ヒータの加熱を制御することで、基準値を超える過熱時における装置のダメージを最小限に抑えること。 - 特許庁
Switching is executed at all times and, when a reference upper part U is disposed upward, an image is displayed such that the reference upper part U side comes to the upper side of the image as usual based on the detection of a direction sensor 17.例文帳に追加
切替処理が常時実行されており、基準上部Uが上に設置された場合には方向センサ17の検知に基づき通常通り基準上部U側が映像の上方となるように映像が表示される。 - 特許庁
This authentication method determines the first rank order in a plurality of minified registration images, based on the similarity between the plurality of minified registration images, with respect to the minified registration image of a reference, using each of the plurality of minified registration images as the reference.例文帳に追加
複数の縮小登録画像それぞれを基準とし、当該基準とした縮小登録画像に対する、複数の縮小登録画像の類似度により、該複数の縮小登録画像における第1の順位を決定する。 - 特許庁
The position detector detects the position of the reference pattern and the position of the measurement pattern, and the optical state of the position detector is inspected based on the relative relation between the position of the reference pattern and the position of the measurement pattern thus detected.例文帳に追加
位置検出装置により、基準パターンの位置および計測パターンの位置を検出し、検出した基準パターンの位置と計測パターンの位置との相対関係に基づいて位置検出装置の光学状態を検査する。 - 特許庁
In an evaluation means 44b, the dimension of the reference mark corresponding to the dimension detection data is obtained, based on the dimension detection data and the reliability of the overlap error of the circuit pattern or the like is evaluated, based on the dimension.例文帳に追加
評価手段44bでは、寸法検出データに基づき該寸法検出データに対応する基準マークの寸法を求め、該寸法に基づいて前記回路パターンなどの重ね合わせ誤差の信頼性を評価する。 - 特許庁
The moving distance DM is found, based on the pulse signal from the vehicle speed sensor, when the vehicle speed Vn of a vehicle found based on pulse signal from the vehicle speed sensor is a reference vehicle speed Vk or more (steps S1-2, S1-3).例文帳に追加
車速センサのパルス信号に基づいて求めた車両の車速Vnが基準車速Vk以上の時、車速センサのパルス信号に基づいて移動距離DMを求める(ステップS1−2、S1−3)。 - 特許庁
The secondary correction process is a process for finally correcting the reference points, based on the difference between the turning angle 0° of the steering shaft 11 and a turning angle detected, based on the signals from the resolvers 11b and 11c.例文帳に追加
2次補正工程は、操舵軸11の回転角0゜とレゾルバ11b,11cからの信号に基づき検出した回転角との相違量に基づき、検出基準点を最終的に補正する工程である。 - 特許庁
A document-registering person ranking totaling part 15 acquires a reference history based on the designated conditions and totals the scores of documents for each document-registering person based on a scoring rule to produce a document-registering person ranking.例文帳に追加
文書登録者ランキング集計部15は、指定された条件に基づいて参照履歴を取得し、スコアリングルールに基づいて文書のスコアを文書登録者ごとに集計して文書登録者ランキングを作成する。 - 特許庁
A clock selection unit 17 selects as a reference clock one of a first clock based upon a special packet, a second clock based upon a clock of the synchronous communication network, and an external supply clock.例文帳に追加
クロック選択部17により、特殊パケットに基づく第1のクロック、同期通信網におけるクロックに基づく第2のクロック又は外部供給クロックのうちからいずれかのクロックを基準クロックとして選択する。 - 特許庁
In a first crew schedule plan, a crew schedule network is generated based on a train timetable or the like (step S1), and basic costs are set in each arc of the crew schedule network based on a predetermined evaluation reference (step S3).例文帳に追加
第1の乗務行路計画では、列車ダイヤ等に基づいて乗務行路ネットワークが生成され(ステップS1)、所与の評価基準に基づいて、乗務行路ネットワークの各アークに基礎コストが設定される(ステップS3)。 - 特許庁
After a specified period has passed, a patch image is generated on a photoreceptive drum 40 under a process condition based on environment, to set a reference value based on detection on sticking amount of toner to the patch image by a sensor 27 through patch detection ATR.例文帳に追加
所定時間経過後、環境に基づくプロセス条件で感光ドラム40上にパッチ画像を作像し、パッチ検ATRにより、センサー27によるパッチ画像のトナー付着量の検知から基準値を設定する。 - 特許庁
Meanwhile, in another recording mode, the LUT of the corresponding recording mode is formed based on information obtained when forming the LUT of the reference recording mode and information based on the exposure condition in another recording mode.例文帳に追加
一方、他の記録モードについては、基準の記録モードのLUT作成の際に得られた情報と、他の記録モードの露光条件に基づく情報とに基づいて、対応する記録モードのLUTを作成する。 - 特許庁
In a nipping detection means 21a-1, the nipping can be judged based on a percentage of the decrease in rotating speed in an ordinary driving; and during driving on a poor road, the nipping is detected based on the amount of decrease from a reference value.例文帳に追加
挟込検出手段21a−1において、通常走行時は、回転速度の低下率に基づき、挟み込みを判断し、悪路走行時は、基準値からの低下量に基づき、挟み込みを検出する。 - 特許庁
This method acquires shape data along radial directions of obverse and reverse faces of the semiconductor wafer, calculates the midpoint of the semiconductor wafer based on the shape data, and calculates a reference curve of a quadratically approximated curve, based on the midpoint.例文帳に追加
半導体ウェハの表裏面の径方向に沿った形状データを取得し、この形状データから半導体ウェハの厚みの中点を算出し、前記中点から2次の近似曲線である基準曲線を算出する。 - 特許庁
The area growth based on the corresponding featured value is operated (S15, S19), and an update position based on the new boundary line of a core area obtained by unifying the area growth results from each reference point is decided (S20).例文帳に追加
対応する特徴量に基づき領域を成長し(S15,S19)、各基準点からの領域成長結果を統合して得られる核領域の新たな境界線に基づく更新位置の決定する(S20)。 - 特許庁
A receiver, that receives a radio signal in which a plurality of reference signals with allocated subcarriers being arranged at different intervals are multiplexed, eliminates all the reference signals from the received radio signals except for any one certain reference signal, and estimates propagation path characteristics of the one certain reference signal as well as estimates propagation path characteristics of any other reference signal based on the propagation path characteristics of the one certain reference signal and the received radio signals.例文帳に追加
割り当てられたサブキャリアの配置間隔が異なる複数の参照信号が多重された無線信号を受信する受信装置であって、前記受信した無線信号からいずれか一つの参照信号以外のすべての参照信号を除外して、前記いずれか一つの参照信号の伝搬路特性を推定すると共に、前記受信した無線信号および前記推定したいずれか一つの参照信号の伝搬路特性に基づいて、いずれか他の参照信号の伝搬路特性を推定する。 - 特許庁
By each object having two reference counts 110 based on an order relation of objects, candidates of objects which serve as starting points for detecting a circular reference are narrowed down, and by performing a partial mark-and-sweep type garbage collection which detects an isolated circular reference by following a reference link from the candidates, a garbage group which forms a circular reference is individually released, and time during which programs are stopped is shortened.例文帳に追加
各オブジェクトについてオブジェクトの順序関係に基づいた2つの参照カウント110を備えることで循環参照を検出するための起点となるオブジェクトの候補を絞り込み、これらの候補から参照リンクを辿って孤立した循環参照を検出する部分的なマーク・アンド・スイープ型のガベージ・コレクションを実行することで個別に循環参照をなすガベージ群を解放し、プログラムの停止時間を短縮する。 - 特許庁
Based on these determination results, a travel driving mode for the vehicle is switched from a manual driving mode following driving operation by the driver to an automatic driving mode based on automatic control for driving according to the reference data when the driving technique determination means determines that the determination result is out of the safety driving range, and then, travel operation of the vehicle is controlled based on the reference data.例文帳に追加
これらの判定結果に基づいて、車両の走行の運転モードを、運転技能判定手段によって判定結果が安全運転の範囲外にあると判定された場合に、運転者による運転操作に従う手動運転モードから、基準データに基づいて運転される自動制御による自動運転モードに切り替え、基準データに基づいて、車両の走行動作を制御する。 - 特許庁
This driving force distribution control device for a four wheel drive vehicle has a torque distribution clutch 3 for distributing engine torque to front wheels and rear wheels, and controls the torque distribution clutch 3 based on corrected torque, by correcting determined reference engaging torque based on a deviation between a target yaw rate and an actual yaw rate of a vehicle, by determining the reference engaging torque of the torque distribution clutch 3 based on the engine torque.例文帳に追加
エンジントルクを前輪と後輪とに配分するトルク配分クラッチ3を備えた四輪駆動車の駆動力配分制御装置において、エンジントルクに基づいて、トルク配分クラッチ3の基準締結トルクを求め、求めた基準締結トルクを、車両の目標ヨーレートと実ヨーレートとの偏差に基づいて補正し、補正後のトルクに基づいて、トルク配分クラッチ3を制御する。 - 特許庁
This Gatch bed is so constituted that, when the bed floor part 1 is vertically moved from the attitude deviated from a reference set attitude based on the preset operation pattern, a control part 7 performs first and second correcting operation controls in the vertical movement direction based on a command to return the floor part 1 to the reference set attitude, and then performs the drive control based on the set operation control.例文帳に追加
ベッド床部1が予め設定された作動パターンに基づく基準設定姿勢から逸脱している姿勢から上下作動を行う場合、制御部7は、指令に基づく上下作動の作動方向で第一、第二の補正作動制御を実行して、床部1を基準設定姿勢に復帰させ、その後、設定作動制御に基づく駆動制御を実行するように構成する。 - 特許庁
The A/D conversion apparatus of the digital video system comprises an A/D converter for performing A/D conversion on an input analog video signal based on a reference voltage value input from the outside and outputting a digital signal, and a reference voltage providing portion for providing the A/D converter with the reference voltage wherein a reference level is successively and repeatedly changed for every predetermined time.例文帳に追加
本デジタルビデオシステムのA/D変換装置は、入力されるアナログ映像信号を外部から入力される基準電圧値に基づいてA/D変換してデジタル信号の方に出力するA/D変換器と、所定の時間度に順次的繰返して基準レベルが変更された基準電圧をA/D変換器に提供する基準電圧提供部とを備える。 - 特許庁
When not within the first preset allowance range, an evaluation value-to-exceptional-reference-waveform is calculated based on an amplitude difference between the detection signal waveform and an exceptional reference waveform in a preset reference condition of the engine 1 (S6), to determine whether the calculated evaluation value-to-exceptional-reference-waveform is within the second preset allowance range or not (S7).例文帳に追加
第1許容値範囲内にないときは検出信号波形と予め設定したエンジン1の基準正常状態における例外的基準波形との振幅差に基づく対例外的基準波形評価値を算出し(S6)、その算出した対例外的基準波形評価値が予め設定した第2許容値範囲内にあるか否かを判定する(S7)。 - 特許庁
The ASK modulation signal demodulation circuit that compares a received wave level modulated by the ASK system with a reference voltage to demodulate a transmitted binary signal based on the result of comparison, is provided with a reference voltage adjustment means consisting of blocks 1, 2, 3 that adjusts the reference voltage depending on magnitude correlation between the level of the received wave and the reference voltage.例文帳に追加
ASK方式で変調された受信波レベルを基準電圧と比較し、該比較結果をもとに送信された2値信号を復調するASK変調信号復調回路において、前記受信波レベルと前記基準電圧との大小関係に応じて前記基準電圧を調整するブロック1、ブロック2、ブロック3からなる基準電圧調整手段を備えた。 - 特許庁
An arithmetic circuit 11 reads the reference value of a tone from a reference data holding circuit 12 and tone attribute information from a reference data holding circuit 13 as well corresponding to the tone selection signals, adds computation to the reference value of the tone based on the read tone attribute information, generates a various kinds of data and thus reduces a required storage capacity and facilitates coping when tone data is changed.例文帳に追加
演算回路11は、トーン選択信号にしたがって、基準データ保持回路12からトーンの基準値を、また属性情報保持回路13からもトーン属性情報を読み出し、読み出したトーン属性情報をもとに卜ーンの基準値に演算を加え、多種多様なデータを生成し、よって必要な記憶容量の削減とトーンデータ変更時への対応を容易にする。 - 特許庁
The pulse generator 10 respectively generates reference pulses SQA1 to SQA7 and reference pulses SQB1 to SQB5, based on delay signals DL0 to DL15 outputted from a delay part 3 and respectively generates a transmission pulse A composed of a line of the reference pulses SQA1 to SAQ7 and a transmission pulse B composed of a line of the reference pulses SQB1 to SQB5.例文帳に追加
本発明に係るパルス生成器10は、遅延部3から出力された遅延信号DL0〜DL15に基づいて基準パルスSQA1〜SQA7と基準パルスSQB1〜SQB5とをそれぞれ生成し、基準パルスSQA1〜SQA7を列とした送信パルスAと基準パルスSQB1〜SQB5を列とした送信パルスBをそれぞれ生成する。 - 特許庁
In the clock oscillator for semiconductor devices of a type that compares a reference voltage with first and second voltages shifting gradually generated in accordance with a preset RC delay value and generates a reference clock by inverting a logic circuit based on a result of the comparison, a reference voltage generation part is provided for changing the reference voltage in proportion with a change in the power supply voltage.例文帳に追加
基準電圧と予め設定されたRC遅延値に応じて生成される徐々に遷移する第一及び第二の電圧とを比較し、その比較結果に基づいて論理回路を反転させることにより基準クロックを生成するタイプの半導体装置用クロック発信器において、前記基準電圧を電源電圧の変化に比例して変化させる基準電圧生成部を設ける。 - 特許庁
An image forming apparatus includes: an illuminance-detecting unit for detecting illuminance in the outside of the apparatus; and a reference-calculating unit for calculating reference illuminance of the power shutdown based on the illuminance thus detected, wherein whether the power is shut down or not is determined by comparing power shutdown reference illuminance calculated by the reference-calculating unit with the illuminance detected by the illuminance-detecting unit.例文帳に追加
装置外部の照度を検知する照度検知手段と、検知された照度に基づいて電源遮断の基準照度を算出する基準算出手段と、を備え、その基準算出手段により算出された電源遮断基準照度、および照度検知手段により検知された照度を比較することにより電源を遮断するか否かを判断する。 - 特許庁
The method includes: receiving encoded data indicative of an interpolated reference frame for at least a portion of a frame; identifying encoded data fields indicative of the interpolated reference frame; generating at least a portion of the interpolated reference frame; and decoding at least a portion of the frame based at least in part on the generated portion of the interpolated reference frame.例文帳に追加
少なくともフレームの一部について挿間された参照フレームを示す符号化されたデータを受信し、挿間された参照フレームを示す符号化されたデータフィールドを識別し、少なくとも前記挿間された参照フレームの一部を生成し、少なくとも前記フレームの一部を前記挿間された参照フレームの前記生成された一部に少なくとも部分的に基づいて復号する。 - 特許庁
To provide an inexpensive reference junction compensator for a thermocouple, allowing precise measurements based on an accurate temperature of a reference junction, applicable for a thermos bottle used in a general ice-point type reference junction compensator, and capable of making the temperature of the reference junction in the thermocouple set to the temperature of a constant-temperature medium, such as ice water, or into a measuring value.例文帳に追加
基準接点の正確な温度に基づいて高精度な測定をすることができ、しかも安価で、かつ一般的な氷点式の基準接点補償器に用いられる魔法瓶に適用可能で、熱電対の基準接点の温度を氷水などの恒温媒体の温度とすることも、あるいは測定値とすることもできる熱電対の基準接点補償器を提供する。 - 特許庁
A device control circuit 21 issues an SCSI command to the SCSI 1 unit based on an input/output request from an I/O request means 32, fetches sense data based on a check condition report from the SCSI unit 1 and compares sense data with dump data collecting reference which is set in the dump data collecting reference storing circuit 22.例文帳に追加
デバイス制御回路21はI/O要求手段32からの入出力要求に基づきSCSI装置1にSCSIコマンドを発行し、SCSI装置1からのチェックコンディション通知に基づきセンスデータを取り込み、センスデータとダンプデータ採取基準格納回路22にセットされたダンプデータ採取基準とを比較する。 - 特許庁
| 例文 |
| Copyright © Japan Patent office. All Rights Reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|