意味 | 例文 (956件) |
供試材の部分一致の例文一覧と使い方
該当件数 : 956件
電源と線材コストを抑え、かつ試験サイクルの時間を短縮することができる断続通電試験装置、断続通電試験方法、および発熱電子デバイスを提供する。例文帳に追加
To provide an intermittent energization testing device, an intermittent energization testing method, and a heat generating electronic device, which can save power supply and a wire rod cost, and shorten time of a test cycle. - 特許庁
試料を試験槽内に入れて揮発物の測定を行った後、試験槽内に付着した揮発物を除去する作業の際に、耐熱性のない部材を取り外すことなく作業できる揮発物測定装置を提供することを課題とする。例文帳に追加
To provide a apparatus for measuring volatile matter for performing work, without removing a non-heat resistant member, when removing a volatile matter adhering to the inside of a test tank, after measuring the volatile matter by loading a sample to the test tank. - 特許庁
遊星歯車支持用の転がり軸受のサンプルである供試軸受を試験する性能評価試験機を、基台3と、軸受保持部材7と、荷重負荷装置6と、回転駆動装置17とで構成する。例文帳に追加
The performance evaluation test machine for testing a test bearing for roller bearing for planetary gear support is constituted of a base stage 3, a bearing holding member 7, a weight load device 6 and a rotational drive device 17. - 特許庁
損傷しにく、かつ大きなスペースを必要としない、試験体と変位検出器との間の電気的絶縁を確保する手段を提供し、応力腐食割れ試験等の材料試験を容易かつ精度良く行うこと。例文帳に追加
To provide a means for securing an electric insulation between a specimen and a displacement detector, that is hardly damaged without requiring a large space, so as to easily and accurately carrying out a material test such as for a stress corrosion crack. - 特許庁
材料の衝撃吸収エネルギーを測定し、特にAPI規格に準じたDWTT試験に好適な落錘式衝撃試験方法およびそれに用いる落錘式衝撃試験機を提供する。例文帳に追加
To provide a method for testing impact of dropping weight type that measures impact absorption energy and is suited for a DWTT test especially, in conformance with API standards, and a machine for testing impact of dropping weight used for it. - 特許庁
90度剥離試験、45度剥離試験などを行うに際し、被試験材の膜の剥離強度を正確に計測することができる剥離強度計測装置を提供すること。例文帳に追加
To provide a peel strength measuring instrument capable of accurately measuring the peel strength of the film of a test target material when a 90° peel test, a 45° peel test or the like are performed. - 特許庁
シンプルな構成のもとに、十数m/秒にもおよぶ高速度の試験から数mm/秒の低速度で安定した試験まで行うことのできる材料試験機を提供する。例文帳に追加
To allow tests ranging over the test at a high speed up to several meters /sec and the stable test at a low speed of several mm/sec, by simple constitution. - 特許庁
素材試料中の特定成分の濃度または量を測定する装置に関して、試料との反応によって発生する反応物質の濃度を正確に検出し、試料中の正確な成分測定を行う分析装置を供給する。例文帳に追加
To provide an analysis device for accurately measuring a constituent in a sample by accurately detecting the concentration of a reactive substance that is generated by reaction with the sample regarding the device for measuring the concentration or quantity of a specific constituent in the material sample. - 特許庁
試験片を把持する部分の摩擦によるロープ試験片の損傷、チャック切れのないキャプスタン型つかみ具を有する材料試験機を提供する。例文帳に追加
To provide a material-testing machine with a capstan-type fixture without any damage of a rope test piece and chuck cutting due to the friction of a part for griping the test piece. - 特許庁
地殻コア試料を、確実に、汚染のない状態で採取することができる地殻コア試料の採取方法および地殻コア試料採取用の流動性被覆材を提供すること。例文帳に追加
To provide a method of extracting a crustal core sample, and a flowable covering material for crustal core sample extraction for positively extracting the crustal core sample in an uncontaminated state. - 特許庁
分析試料は機械側で取り出されて試料通路に供給され、センサを校正するために、室内にある校正液は当該閉鎖部材の開放後に試料通路内に配量される。例文帳に追加
An analytical sample is taken out in a machine side to be supplied to tha sample passage 7, and the calibration solution in the chamber 4 is dispensed into the sample passage 7 after releasing the blocking member 13 to calibrate the sensor. - 特許庁
高温で使用される材料に対しても有効な熱疲労試験片を簡易に実施することができる,熱疲労試験方法及び熱疲労試験装置を提供すること。例文帳に追加
To provide a method and an equipment for thermal fatigue test in which thermal fatigue test can be conducted effectively and conveniently even for a material being used under high temperature. - 特許庁
漏洩試験に際して補強部材を不要とし、ワークの内外圧力差を監視する必要がない漏洩試験方法及び漏洩試験装置を提供する。例文帳に追加
To provide a method and an apparatus for a leak test in which a reinforcing member is not required during the leak test, and in which the monitoring of the pressure difference between the inside and the outside of a work is not required. - 特許庁
材料試験片に衝突させる衝突ヘッドの衝撃荷重値を適切かつ一定な値とする落錘式衝撃試験装置と落錘式試験方法を提供する。例文帳に追加
To provide a falling weight type impact test apparatus and a falling weight type test method which make an impact load value of a collision head to be made to collide with a material test piece into an appropriate and fixed value. - 特許庁
自然環境下における材料の劣化及び寿命予測に関して、耐候試験機の試験結果と、実際の環境下での劣化結果との間に乖離を生ずることがない耐候試験機を提供する。例文帳に追加
To provide a weatherometer not generating separation between the test results from the weatherometer and the deterioration results in an actual environment, concerning deterioration and life time prediction of a material in a natural environment. - 特許庁
封止材を用いることなく所定量の液状試料をガラス毛細管に封入する手段を提案し、測定分析機器用の点検液、試薬等の液状試料をガラスカプセルとしてユーザーに提供可能とする。例文帳に追加
To provide a means for enclosing a predetermined amount of the liquid sample into a glass capillary tube without using an enclosing agent and to provide the liquid sample such as an inspection liquid, a reagent or the like for a measuring analyzer to a user as a glass capsule. - 特許庁
試験力が急激に変化したときでも、指針を確実に試験力の最大値を示す位置まで移動させることが可能なアナログ指示計を備える材料試験機を提供する。例文帳に追加
To provide a material testing machine including an analog indicator capable of surely moving a pointer to a position indicating a maximal value of a test force even when the test force is abruptly changed. - 特許庁
荷電粒子線を照射して観察及び分析する試料を搬送するための試料搬送装置であって、試料が設置される試料ホルダを内部に収容可能な伸縮部材と、前記試料ホルダを前記伸縮部材の内部で固定する固定部材と、前記伸縮部材内部と接続し試料ホルダが通過する開口部の開閉を行う封止部材を備えたことを特徴とする試料搬送装置を提供する。例文帳に追加
In the sample transfer device for transferring the sample to be observed and analyzed by irradiating the charged particle beam, the sample transfer device includes an expansible hollow member capable of internally storing the sample holder where the sample is mounted, a fixing member for fixing the sample holder inside the expansible hollow member, and a sealing member for opening and closing an opening communicating with the inside of the expansible hollow member and used for passing the sample holder. - 特許庁
電子デバイス等の微小構造物からなる供試体または電子デバイスのはんだ接合面などの供試体にマイクロオーダの変位を加えながら、その異種材接合構造等の強度を高精度に計測することのできる簡易な構成の材料試験機を提供する。例文帳に追加
To provide a material test machine having a simple configuration and capable of accurately measuring strength of a joint structure of different types of materials while applying displacement of micro-order to a specimen composed of a minute structure such as an electronic device or a specimen such as a joined face by soldering of the electronic device. - 特許庁
建築用外装材等の光触媒利用部材を実際に使用する現場において、当該部材に含まれる光触媒が発揮し得る光触媒機能を簡便に評価し得る試験方法及び試験用器具を提供すること。例文帳に追加
To evaluate simply a photocatalyst functions that can be exhibited by a photocatalyst included in a member, in the field where the photocatalyst using member, such as an outer packaging material for building is actually used. - 特許庁
木製軸組部材を構成する木材の試験体について小規模な燃焼試験を行うだけで、精度の良い非損傷性の検証を効率良く行うことのできる木製軸組部材の非損傷性検証方法を提供する。例文帳に追加
To provide a method for verifying non-damage property of a wooden framework member that can efficiently verify a non-damage property in high accuracy only through a small-scale combustion test on a test piece of wood constituting the wooden framework member. - 特許庁
本発明は、材料の強度評価が可能な負荷速度範囲を広げることができる材料試験方法及び材料試験装置を提供することを目的とする。例文帳に追加
To provide a material testing method and a material testing device capable of widening a loading rate range in which a strength evaluation of a material is possible. - 特許庁
通信復帰の際に通信復帰前の材料試験を極力続行することできるとともに、通信異常の際に極力自動的に復帰することができる材料試験装置における通信復帰方法および材料試験装置を提供することを目的とする。例文帳に追加
To provide a communication recovering method for material testing device and a material testing device, with which a material test before communication recovery can be continued as long as possible in the case of communication recovery and communication can be recovered as automatically as possible in the case of communication abnormality. - 特許庁
摩擦材に対して圧縮荷重とせん断荷重とを同時に付与して評価試験を行うことが可能とされ、当該摩擦材の使用条件と評価試験時の条件とを合致させてその評価を精度よく行わせることができる摩擦材の強度評価試験装置を提供する。例文帳に追加
To provide a testing apparatus for evaluating strength of a friction material, capable of performing an evaluation testing by applying a compressive load and at the same time a shearing load to a friction material and capable of accurately performing the evaluation by matching the use conditions of the friction material and the conditions at the evaluation testing time. - 特許庁
コーティング部材の試験条件を実機使用条件に十分に模擬することが可能であり、コーティング部材のより詳細な損傷メカニズムの解明と、より高精度な寿命評価とを可能にするコーティング部材の試験方法および試験装置を提供する。例文帳に追加
To provide a durability testing method of coating member and a test device therefor that enable the sufficient simulation of the test condition of a coating member against the working condition of an actual machine, the investigation for more detailed damage mechanism of the coating member, and more accurate life evaluation. - 特許庁
フィルタロッド等の棒状の包装品から包材試験片を機械的に切出すことができる包材試験片切出し装置、包材試験片に対する品質測定装置及び切出し装置を含む品質検査システムを提供する。例文帳に追加
To provide an apparatus for cutting out a package test piece, with which a package test piece is mechanically cut out from a bar-like packaged product such as a filter rod etc., an apparatus for measuring quality of package test piece and a system for quality inspection comprising the cut out apparatus. - 特許庁
試験片の材質、表面状態、または試験条件等に影響されず、点接触状態において、常に安定した回転数及び接触位置で摩耗試験を行い、再現性の高い耐摩耗性を評価する装置及び試験方法を提供する。例文帳に追加
To provide an apparatus and a test method for conducting wear tests in a point-contact state at a constantly stable revolution speed and contact position without being affected by the material or the surface conditions of a specimen, test conditions, etc. which is capable of evaluating wear resistance with high repeatability. - 特許庁
これにより、引張試験時に引張試験用供試材を管状のまま縮径させることなく引っ張ることができるため、各試験片部3の縮径に伴う曲げモーメントの発生や、長手方向の反りの発生などを防ぎつつ、単軸引張による正確な測定を行うことが可能となる。例文帳に追加
Therefore, the sample for tensile test can be pulled in a tubular state as it is without the reduction in diameter when the tensile test is performed, so that accurate measurement with uniaxial tension is possible while preventing the occurrence of a bending moment, the occurrence of warpage in a longitudinal direction, and the like due to the reduction in diameter of each test piece part 3. - 特許庁
短時間でインタフェースボードを試験することができ、かつ、スロットに格納される部材のアナログ特性に依存せず、適切な試験結果を得ることができるインタフェースボード試験装置及びインタフェースボード試験方法を提供する。例文帳に追加
To provide an interface board testing device and an interface board testing method which can test an interface board in a short period of time, and obtain an appropriate test result independently of analog characteristics of a member stored in a slot. - 特許庁
耐久性が高く、構成材料の試料へ混入を著しく減少でき、かつ過去に使用した試料による影響を受けることが少ない試料調整器具、試料調整方法、及び高精度の元素分析方法を提供することできる。例文帳に追加
To provide a sample preparation apparatus having high durability, capable of reducing greatly contamination of a constitutive material into the sample, and hardly influenced by a sample used in the past, a sample preparation method and a highly-accurate elemental analysis method. - 特許庁
電子デバイス等の微小構造物からなる供試体にマイクロオーダの変位を加えながら、その異種材接合構造等の強度を高精度に計測することのできる簡易な構成の材料試験機を提供する。例文帳に追加
To provide a material tester of a simple arrangement which is capable of measuring the strength of a dissimilar material connecting structure with high accuracy while applying displacement on a microscopic order to a sample constructed of a microstructure, such as an electronic device. - 特許庁
コンクリート材料の配合データと、このコンクリート材料が混練され製造されたコンクリートの品質データと、このコンクリートから供試体を作製して所定期間養生した後、供試体の圧縮強度試験により得られた圧縮強度とを関連付ける強度推定式を予め構築する。例文帳に追加
A strength-estimating equation is previously established, wherein compound data of a concrete material, quality data on concrete manufactured by kneading the concrete material, and a compressive strength obtained from a compressive strength test of a sample made of the concrete after a prescribed curing period, are related to another. - 特許庁
試料液供給手段16から管部材6を通して試料液回収手段18に観察試料液を流すと、管部材6を流れる際に観察試料液に含まれる観察体が多数の微小突部12に衝突し、かかる衝突によって観察体が観察試料液の所定方向の流れを利用して回動し、その結果、顕微鏡を用いて観察体を多面的に観察することができる。例文帳に追加
As a result, the observation object can be observed from many aspects using a microscope. - 特許庁
アゾ色素の合成中間体あるいは分析試薬,感熱記録材料用素材として重要なジアゾニウム塩を提供すること。例文帳に追加
To provide a diazonium salt important as an intermediate for synthesizing azo dyes or as a raw material for analytical reagents and thermal recording materials. - 特許庁
アゾ色素の合成中間体、分析試薬、あるいは感熱記録材料用素材に有用な、新規なジアゾニウム塩を提供すること。例文帳に追加
To obtain a new diazonium salt useful for a synthetic intermediate for an azo coloring matter, an analytical reagent or a material for a thermosensitive recording material. - 特許庁
アゾ色素の合成中間体、分析試薬、あるいは感熱記録材料用素材に有用な、新規なジアゾ化合物を提供すること。例文帳に追加
To provide a new diazo compound useful for synthetic intermediates for azo dyes, analytic reagents or as a material for heat-sensitive recording materials. - 特許庁
簡単な構造の蓋部材を有する試薬収容具を用いて、蓋部材を自動的に開閉することが可能な分析装置を提供する。例文帳に追加
To provide an analyzer capable of automatically opening and closing a lid member using a reagent storing device having the lid member with simple structure. - 特許庁
電磁誘導加熱用部材、例えば、個々の試料について種々の温度で局所加熱が可能な部材を提供すること。例文帳に追加
To provide a member for electromagnetic induction heating, for example, a member for heating individual samples locally at various temperatures. - 特許庁
試料の基材の材質に関係なく簡単な構成で光触媒機能を評価できる軽便な装置を提供すること。例文帳に追加
To provide a simple apparatus capable of evaluating photocatalyst function with a simple constitution, regardless of the material quality of the base material of a sample. - 特許庁
特殊な温度環境下で用いられる各種材料の強度特性評価方法、及び、この方法を実現可能とする材料試験装置を提供する。例文帳に追加
To provide a strength characterization method of various materials used under a particular temperature environment and a material testing device achieving the method. - 特許庁
そして、一体化した試料収容部材46および第二の閉塞部材50を容器から引き上げて、測定、分析に供する。例文帳に追加
Then, the sample storage member 46 and the second closing member 50, which are now integrated, are pulled up out of the container and provided to measurement and analysis. - 特許庁
硬さ試験等の材料特性評価における評価精度をより向上させることができる材料特性評価装置を提供する。例文帳に追加
To provide a material characteristic evaluation device capable of enhancing evaluation precision in material characteristic evaluation such as a hardness test. - 特許庁
定着部材の低エネルギー定着型トナーに対する耐オフセット性、定着性能など、部材の表面特性の試験方法を提供する。例文帳に追加
To provide a method for testing the surface-characteristics of a member, such as the anti-offset properties, fixation performance, etc., of a fixation member to a low-energy fixation-type toner. - 特許庁
また、管理用供試体の材齢28日圧縮強度と強度補正値は、結合材水比毎に異なる値に設定することもできる。例文帳に追加
The specimen for management at a material age of 28 days and the strength correction value can be set at different values for every binder-to-water-ratio. - 特許庁
試し打ちを行う一枚目からスケジュール運転できるような板材加工方法および板材加工装置を提供する。例文帳に追加
To enable the schedule operation from a first plate for trial. - 特許庁
無機系材料における材料探索を加速度的に行うことができる試料調整方法を提供することを課題とする。例文帳に追加
To provide a specimen preparation method enabling material search in an inorganic material at a high speed. - 特許庁
マッド材の拡がり特性を的確に評価することができるマッド材熱間圧入試験装置を提供する。例文帳に追加
To provide a test apparatus of hot press-fit for a mud material, with which spreading characteristics of the mud material can surely be evaluated. - 特許庁
冬期間に限らず一年中、滑り止め材の効果を正確に評価するのができる滑り止め材試験装置を提供することである。例文帳に追加
To accurately evaluate an effect of an anti-skid material throughout the year, without being limited to a winter season. - 特許庁
金属材料の燃焼伝播性を正確にかつ客観的に評価することができる金属材料の燃焼試験用試験片、燃焼試験装置、および燃焼伝播温度並びに燃焼伝播速度の測定方法を提供することである。例文帳に追加
To provide a test piece for metallic material combustion test, a combustion tester, and a measurement method for combustion propagation temperature and combustion propagation rate, for accurately and objectively evaluating the combustion propagation properties of a metallic material. - 特許庁
超電導磁気浮上式鉄道用地上コイルのモールド材を対象に、駆動源として動電型振動発生装置を用いて材料試験片に曲げ疲労負荷を与えて疲労試験を実施する、動電型振動発生装置を用いた周波数可変疲労試験装置を提供する。例文帳に追加
To provide a frequency variable fatigue testing device using an electrically operated vibration generator targeting a mold material of a ground coil for a superconducting magnetically levitated railroad, and making a fatigue test by applying a bend fatigue load to a material test piece by an electrically operated vibration generator as a drive source. - 特許庁
意味 | 例文 (956件) |
Copyright © Japan Patent office. All Rights Reserved. |
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |
ログイン |
Weblio会員(無料)になると 検索履歴を保存できる! 語彙力診断の実施回数増加! |