| 意味 | 例文 |
pull aの部分一致の例文一覧と使い方
該当件数 : 5277件
The optimum initial value of a reference tap to be given to traversal type adaptive equalizer 105 (105a and 105b) of the respective paths is equally given to the respective paths to perform an initial pull-in operation in a short time.例文帳に追加
各パスのトランスバーサル型適応等化器105に与える基準タップの初期値を各パスとも最適値を同一に与えて、初期引き込み動作を短時間で行う。 - 特許庁
The output amplifier is a push-pull system of output circuit and in linear drive mode, A/B-class actions are set, and in pulse drive mode, the B-class action is set.例文帳に追加
出力アンプは、プッシュプル方式の出力回路とし、リニア駆動モード時にはAB級動作が設定され、パルス駆動モード時にはB級動作が設定されるようにする。 - 特許庁
To provide an opening operating force measuring device for an iron lid for a manhole capable of reducing measurement errors for an opening operating force, by making a bar pull-down speed constant and easily stabilizable.例文帳に追加
バールの引下げ速度を一定に安定しやすくすることで開放操作力の測定誤差が少ないマンホール用鉄蓋の開放操作力測定装置を提案する。 - 特許庁
At least one of the first seal mounting section and the second seal mounting section is provided with through holes (105a, b) and a slit (107a) along a pull-out direction of the seal cover.例文帳に追加
第1シール装着部と第2シール装着部の少なくとも一方には、貫通孔(105a,b)、シールカバーを引き抜く方向に沿ってスリット(107a)が設けられている。 - 特許庁
The shape memory alloy 18 contracts at a low temperature to pull up the temperature control element 8 to assure a sufficient flow path in the clearance thereof from the valve seat member 7.例文帳に追加
形状記憶合金18は低温時に収縮して温度制御機素8を上方に引き上げ、弁座部材7との間に充分な排出流路を確保する。 - 特許庁
At a press conference, Shibasaki said, "This novel is a compilation of my interests. I wanted to really pull my readers into the story."例文帳に追加
記者会見で柴崎さんは「この小説は私が心引かれるものの集大成です。読んでいる人を物語にしっかりと引き込みたいと思いました。」と語った。 - 浜島書店 Catch a Wave
When a landing floor position of a car 1 is on a landing floor level within a prescribed range before door opening in landing, a lock is released by ON-outputting a locking-pin pulling-up command signal (DLRY) to pull up a locking pin of a car door locking device 2, and a door opening operation is started thereby.例文帳に追加
着床時戸開する前に、乗りかご1の着床位置が所定範囲の着床レベルにあるとき、ロックピン引き上げ指令信号(DLRY)をオン出力してかごドアロック装置2のロックピンを引き上げてロックを解除し、戸開動作を開始する。 - 特許庁
To provide a game medium dispenser preventing pull-out of a game medium during dispensing in a simple configuration without using a carrier mechanism of incorporating the dispensing medium such as a non-contact IC card and the like.例文帳に追加
非接触ICカード等の貸出媒体を遊技機本体内に取り込む搬送機構を用いずに、簡易な構成で貸出処理中の引き抜きを防止することのできる遊技媒体貸出機を提供する。 - 特許庁
Each ribbon plate (101), in which the pull element and the rotating element each are formed, is formed as a group of plates (12), in which the two discrete plates (12) of a thickness of 0.1-0.2 mm are paired in such a manner that a surface and a backside are superposed on each other.例文帳に追加
引きエレメント、回転エレメントをそれぞれ形成する個々のリボンプレート(101)を、厚さ0.1mm〜0.2mmの単品の2枚が表裏に重ね合わされて一組とされたプレート(12)群とする。 - 特許庁
A pull-up piece 16 is manually pulled up to let a magnet 29 be magnetically attracted by an iron plate 28 through an elastic film 11, and a sealing valve 27 releases a discharge port 23 and a stopper 24 for feeding liquid.例文帳に追加
引き上げ片16を手動で持ち上げることで磁石29が鉄板28に弾性膜11を介して磁力によって吸着し、封止弁27が吐出口23とストッパー24を開放し、液体が流れる。 - 特許庁
Furthermore, although a circulation-type bathtub in a senior care home etc. has a risk of the occurrence of a pull-in accident as in the case of the pool, the prevention of a similar accident is expected by using the safety cover 2.例文帳に追加
また、老人介護施設などにおいても循環型の浴槽では、プールと同様の引き込み事故が発生するおそれがあるが、安全蓋2を用いることによりそのような事故が防止できると期待される。 - 特許庁
To provide a pull of each form for operating a screen 8 of a roll screen allowing a user to mount and dismount it easily on the roll screen without using a tool and capable of reducing manufacturing cost.例文帳に追加
ロールスクリーンのスクリーン(8)を操作する各形式の引き手であって、ユーザが工具を使用せずに容易にロールスクリーンに脱着することが可能であり、かつ製造コストを低減することができるものを提供する。 - 特許庁
While a metal bottom plate 12 is inserted in a cylindrical casting mold 11, the aluminum alloy in a molten state is poured into a casting cavity composed by the casting mold and the bottom plate, and then the bottom plate 12 is lowered to pull a cast ingot out downward.例文帳に追加
筒状の鋳型11内に底金12を挿入し、鋳型及び底金により構成された鋳込み空間にアルミニウム合金の溶湯を注入し、底金12を下降させることにより鋳塊を下方に引き抜く。 - 特許庁
The rocking stopper 58 is released by a release cam member 168 attached to a device 18 for transferring a work, and the cylinder head 12 is taken out of the basket 10 by the action of a pull-out lever 156 and a delivery hook 180.例文帳に追加
揺動ストッパ58は、ワーク搬送装置18に設けられた解除用カム部材168によって解除され、シリンダヘッド12は、引出レバー156及び払出フック180の作用下にバスケット10から取り出される。 - 特許庁
A cap opening part 2 and a can pull-tab opening part 3 are provided on a plate-like article 1, a magnifying glass 4 and a suspension hole 5 are provided between both ends of the article 1, and the plug-opening tool has three functions.例文帳に追加
板状の物体1にキャップ開口部2と缶のプル・タブ開口部3を備え、かつ、前記物体1の両端の間に拡大鏡4と吊り下げる穴5を備え、三つの機能を合わせ持つ開栓ツール。 - 特許庁
To provide a locking device for a pull-up opening type window capable of ensuring safety for preventing a trouble where a window at an opening position suddenly slides toward a closing position, and of improving operability and durability.例文帳に追加
開位置にある窓が突然、閉位置に向かってスライドしてしまう不具合を防止する安全性の実現と、操作性及び耐久性の向上とを実現できる引上げ開放式窓のロック装置を提供する。 - 特許庁
To provide a golf bag which keeps the head of a golf club housed in its body from contacting a hand holding the grip part of a pull member and moreover, enables a stable movement of it when moved being inclined.例文帳に追加
ゴルフバッグを傾けて移動させる際、バッグ本体内に収容したゴルフクラブのヘッドが引き手部材のグリップ部を握る手に当たることがなく、しかも、安定した状態で移動させることのできるゴルフバッグを提供する。 - 特許庁
To provide an input buffer with which a pad can be pulled up to a power supply voltage level when turning the pad into a floating state, and a pull-up means can be protected when applying a high voltage to the pad.例文帳に追加
パッドがフローティング状態になる場合にパッドを電源電圧レベルにプルアップすることが可能であり、パッドに高電圧が印加される場合はプルアップ手段を保護することができる入力バッファを提供する。 - 特許庁
The pull head body 16 includes a disk-like head part 16a at the one side, a bottom part 16b having a tilted surface toward a center part at the other side, and a bearing part 16c between the head part 16a and the bottom part 16b.例文帳に追加
プルヘッド本体16は一側に円盤状の頭部16aと、他側に中心部に向かって傾斜面を有する底部16bと、頭部16a及び底部16b間に形成された軸受部16cと、を備える。 - 特許庁
To provide a conductive plate which is free from damage caused by the pull of a transparent conducting film in a base when the base is curved, and can save a manufacturing cost, and a method for manufacturing the conductive plate.例文帳に追加
本発明は、基板が湾曲する時、基板における透明導電性フィルムの引張による破損を免れる一方、コストを節約できる導電板及びその製造方法を提供することを目的とする。 - 特許庁
The melt 15 is reserved in a crucible 12 disposed in a chamber 11 and a seed crystal 23 to be in contact with the melt is hooked on a seed pulling means 18 so as to pull up a single crystal from the melt in the crucible.例文帳に追加
チャンバ11内に設けられた坩堝12に融液15が貯留され、坩堝内の融液から単結晶を引上げるために融液に接触させる種結晶23がシード引上げ手段18に吊下げられる。 - 特許庁
To achieve instantaneous pull-in by a large-scale system including a master device, a repeater, and a slave device and to improve tolerance to a plurality of long-time-length impulsive noises to secure stabler data communication.例文帳に追加
親機、中継機、子機を備えた大規模なシステムで瞬時引き込みが可能で、かつ、複数の時間長の長いインパルス性雑音に対する耐力を向上でき、より安定したデータ通信を確保できるようにする。 - 特許庁
The tip antenna 53 is placed, in a way such that its maximum radiation direction and a direction of inserting/pull out of the radio transceiving unit 5 at a personal computer side to/from the personal computer (a direction of the arrow A in Figure 1) are nearly coincide with each other.例文帳に追加
チップアンテナ53は、その最大放射方向と、パソコンに対してパソコン側の無線送受信ユニット5を抜き挿しする方向(図1中の矢印Aの方向)とが略一致するように設置されている。 - 特許庁
In this vibration control damper 10 with a pre-load, a return spring 41 on the push side is situated at the periphery of a piston rod 12 at the external part of a damper tube 11, and a return spring 42 on the pull side is situated at the first oil chamber 14A of the damper tube 11.例文帳に追加
プリロード付制振ダンパ10において、押側戻しばね41をダンパチューブ11の外部のピストンロッド12周囲に配置し、引側戻しばね42をダンパチューブ11の第1油室14Aに配置したもの。 - 特許庁
In the case of receiving a video image that is subjected to 3:2 pull-down, a redundant field eliminating section 103, a scramble section 107, and a compression coding section 109 conduct elimination of a redundant field, scrambling and compression coding in this order.例文帳に追加
3:2プルダウンされた映像が入力された場合、冗長フィールド除外部103、スクランブル部107、圧縮符号化部109にて冗長フィールドの除外、スクランブル、圧縮符号化をこの順序で行う。 - 特許庁
In the take-up type roof shade device, at a pull-out end portion of sheet-shaped shade cloth energized in a take-up direction, a garnish 12 is provided in a width direction, and the garnish 12 is provided with a plurality of ventilating passages 12f.例文帳に追加
巻取式ルーフシェード装置は、巻取方向に付勢されたシート状シェード生地の引出端部に、ガーニッシュ12がその幅方向に沿って備えられ、ガーニッシュ12に複数の換気通路12fが設けられる。 - 特許庁
To provide customers with a safe, inexpensive and simple convenience widely which can be used for the removal of a torso surrounding thing of a PET bottle, pull top rising, unpacking of a corrugated card board, peeling of an orange or the like and loosing the knot of a string.例文帳に追加
ペットボトルの胴巻きはずしやプルトップ起こし、ダンボールの開梱、オレンジなどの皮むき、紐の結び目のほどきなどに使えしかも安全で安価な簡易利器を消費者に広く提供しようとするものである。 - 特許庁
A port monitor installed in a print server 30 of a pull printing system receives print data DT in which authentication information AT encrypted in a state where a print output target model can decrypt the code is embedded.例文帳に追加
プルプリントシステムのプリントサーバ30にインストールされたポートモニタは、印刷出力対象機種による暗号化解除が可能な状態で暗号化された認証情報ATが埋め込まれた印刷データDTを受信する。 - 特許庁
In a pull-down error detection circuit 27, a field insertion interpolation signal from a double-speed conversion section 26 is evaluated, and is replaced with a motion adaptive interpolation signal when it is determined that the signal is a double image.例文帳に追加
プルダウンエラー検出回路27では、倍速変換部26からのフィールド内挿補間信号を評価して、2重画像であると判断すれば、フィールド内挿補間信号を動き適応型補間信号に置き換える。 - 特許庁
A second pull cord 71 is extended upward and wound around a direction inverting member 31, and has a second front end 711 provided on a runner 40 and a connecting end 712 connected to the connecting end portion 752.例文帳に追加
第2の引き紐71は上側にのびて方向反転部材31に巻きつけてなり、ランナー40に設けられた第2の前端部711と、接続端部752に連結された連結端部712とを有する。 - 特許庁
To easily perform work for replacing a circuit board, even if a coupling part between two units, which constitute a recording apparatus body, has to be arranged in a position which straddles a pull-out path of the circuit board.例文帳に追加
記録装置本体を構成する2つのユニットの連結部を、回路基板の引き出し経路を跨ぐ位置に配置せざるを得ない場合においても、回路基板の交換作業を容易に行える様にすること。 - 特許庁
A seat belt retractor includes an acceleration sensor 100 that detects the acceleration of a vehicle body in a horizontal direction, and a lock mechanism that locks the pull-out action of a seat belt in response to the acceleration detected by the acceleration sensor.例文帳に追加
シートベルトリトラクタは、車体の水平方向の加速度を検出する加速度センサ100と、加速度センサによって検出される加速度に応じて、シートベルトの引出し動作をロックするロック機構と、を備える。 - 特許庁
To provide a piggyback type hatch device in a simpler constitution, in which a lifting device can lift arbitrary one of a pair of adjacent hatch covers to a high position, and the other hatch cover can be freely pull in thereunder.例文帳に追加
隣接する1組のハッチカバーの任意の一方を昇降装置で高位置に持ち上げて、その下に他方のハッチカバーを自在に引き入れることのできるピギーバック型のハッチ装置を、より簡易な機構で実現する。 - 特許庁
A hydrant apparatus 10 is configured to open the hydrant door 18 openably/closably mounted to a door opening section 16 of a housing front face, pull out a hose 44 with a nozzle 48 stored in a hose storage section and discharge water.例文帳に追加
消火栓装置10は、筐体前面の扉開口部16に開閉自在に装着された消火栓扉18を開いてホース収納部に収納したノズル48を装着したホース44を引き出して放水する。 - 特許庁
To greatly improve a shaving efficiency and a cutting performance by favorably exhibiting a pull cutting function of a rotary cutter in a rotary electric razor having a vibration mechanism reciprocatingly vibrating the rotary cutter in the left/right direction.例文帳に追加
ロータリー内刃を左右方向に往復振動させる振動機構を具備するロータリー式の電気かみそりにおいて、ロータリー内刃の引き切断機能を良好に発揮させることにより、髭剃り効率や切り味の格段の向上を図る。 - 特許庁
To provide a bit line pull-up circuit which can compensate a leakage current for preventing delay of operation and malfunction of a sense amplifier even at the time of driving a low power semiconductor memory element by compensating a leakage current generated in a bit line.例文帳に追加
ビットラインで発生する漏洩電流を補償して低電力半導体メモリ素子の駆動時にも動作遅延とかセンス増幅器の誤動作を防止する漏洩電流が補償できるビットラインプルアップ回路を提供する。 - 特許庁
To provide a control device of an automatic transmission in which pull-in torque generated due to generation of clutch torque in an ON side (a gear stage of a change gear destination) of a torque phase on a gear change is independent of responsiveness of hydraulic pressure of a clutch.例文帳に追加
変速のトルク相においてオン側(変速先の速度段)のクラッチトルクの発生によって生じる引き込みトルクをクラッチ油圧の応答性に依存させないようにした自動変速機の制御装置を提供する。 - 特許庁
To provide a bathroom unit allowing even the infancy and the elderly to easily pull a shower head from a bathroom wall while having a sufficient magnetic force for preventing the moving of a shower head by a water pressure, and using no electricity.例文帳に追加
本発明は、水圧によりシャワーヘッドが移動しないだけの磁力を有しながら、幼年者・高齢者でも容易にシャワーヘッドを浴室壁から引き剥がすことができ、電気を使用しない浴室ユニットを提供することを目的とする。 - 特許庁
To provide a working machine for pulling out a pile, which enables assembling operations for a casing etc. to be easily performed even on a narrow site, because it can perform not only a pull-up operation but also a push-in one.例文帳に追加
本発明は、杭引抜き用作業機に関し、引き上げるだけでなく押し込み作業もできて、狭い敷地でも容易にケーシング等の組立作業等が出来る様にすることが課題であって、それを解決することである。 - 特許庁
In both a pull-in step and a lock time, an oscillator controller 255 and a frequency divider controller 257 cause an oscillation control signal and a frequency division control signal to vary cooperatively with a proportional relationship on the basis of a loop filter voltage.例文帳に追加
発振器制御部255と分周器制御部257は、発振制御信号と分周制御信号が、引込み過程およびロック時の双方において、ループフィルタ電圧に基づいて比例関係を持って連動して変化するようにする。 - 特許庁
For a land prepit detection signal LPPout' obtained by comparison between a push-pull signal and a comparison reference signal, a correct land prepit detection signal LPPout is obtained by eliminating a signal with short pulse length as a noise pulse.例文帳に追加
プッシュプル信号と比較基準信号の比較によって得られるランドプリピット検出信号LPPout’について、パルス長が短いものはノイズパルスとみなして除去することで、正しいランドプリピット検出信号LPPoutを得る。 - 特許庁
To provide a catheter kit used for forming a gastrostoma of a living body and capable of carrying out a push method or a pull method under an improved usability while reducing bacterial infection of a gastrostoma forming site of the living body.例文帳に追加
生体の胃瘻を造設するために用いられるカテーテル・キットであって、生体のうちの胃瘻造設部位の細菌感染を軽減しつつプッシュ法またはプル法を改善された使い勝手のもとに実施することが可能なものを提供する。 - 特許庁
In this print data generation device, a pull-down menu is displayed in a trial print setting screen opened by selecting a trial print tab in a basic setting screen, and an area designation frame of frame size according to a ratio of trial print size/actual print size is displayed by a designated number (S40).例文帳に追加
基本設定画面で試し印刷タブを選択して開く試し印刷設定画面には、プルダウンメニューが表示されるとともに、試し印刷サイズ/本印刷サイズの比に応じた枠サイズのエリア指定枠を指定数表示する(S40)。 - 特許庁
To provide a method of evaluating a die casting release agent, in which a more reliable evaluation result is obtained concerning pull force when a casting is separated from a metal block, or observation of the casting separated from the a metal block.例文帳に追加
鋳物が金属ブロックから離れる時の引張り力や、金属ブロックから離された鋳物の観察について、より信頼性の高い評価結果を得ることができる、ダイカスト離型剤の評価方法を提供することを課題とする。 - 特許庁
To prevent active attack so that a stable active region can be kept, when not a striping using a conventional wet type phosphoric acid but a dry type pull back is executed, in a formation of a device isolation film using trench.例文帳に追加
トレンチを用いたデバイスアイソレーション膜の形成において、従来のウェットタイプのリン酸を使用したストリッピングではなくドライタイプのプルバックを行う場合に安定的なアクティブ領域を確保するようにアクティブなアタックを防止する。 - 特許庁
A special control mode is set for pulling in a symbol associated with special prize-winning onto a stop line with a pull-in quantity less than or equal to a prescribed upper limit value and for stopping the symbol when a successful lot of special prize-winning is drawn in internal lottery.例文帳に追加
内部抽選によって特別入賞に当選したとき、特別入賞に関わるシンボルを所定の上限値以下の引き込み量をもって停止ライン上へ引き込んで停止させる特別の制御モードが設定される。 - 特許庁
A toggle mechanism is installed in a link mechanism to push and pull an elevating element 1, and a stopper 13 is installed to generate a stop just before the lowest point of the toggle mechanism working point so that a constant characteristic of the lower dead point and a force assisting effect are obtained.例文帳に追加
昇降体1を押し引きするリンク機構にトグル機構を介在させるとともに、トグル機構の作用点の最下点の直前で停止するようなストッパ13を設けて下死点の一定性と倍力作用を得る。 - 特許庁
To provide a capsule-type medical apparatus where a capsule moves smoothly in a lumen without being hindered by an interceptor such as a mucosa, a digestive fluid when drawing a cord member in the lumen to pull back and operate the capsule.例文帳に追加
管腔内において紐状部材を牽引してカプセルを引き戻し操作したとき、粘液、消化液、残渣等の阻止物によって該カプセルの移動が妨げられることなく、管腔内をスムーズに移動するカプセル型医療装置を提供する。 - 特許庁
To provide a reproducing device capable of quickly performing a PLL operation (frequency and phase pull in and lock) in reproducing a continuous wave such as a VFO (variable frequency oscillator) recorded on a recording medium, and to provide a program .例文帳に追加
再生装置内のPLL回路は、1T以上離れると正しい位相エラーを出力しなくなり、誤った位相エラーに基づく周波数から脱出する事ができず、擬似ロックに陥ったり、周波数引き込みが困難になる。 - 特許庁
The power-generation unit 131 includes a mechanism, which winds up a spiral spring 133 while extracting a pull line 113 wound around a pulley 135, and a mechanism for rotating a motor 142 at high speed while transmitting torque, occurring when the spiral spring 133 is released, to the motor.例文帳に追加
発電ユニット131はプーリ135に巻回したプルライン113を引き出してぜんまい133を巻き上げる機構と、ぜんまい133が解けるトルクを伝達してモータ142を高速で回転させる機構を備えている。 - 特許庁
| 意味 | 例文 |
| Copyright © Japan Patent office. All Rights Reserved. |
| Copyright © 1995-2026 Hamajima Shoten, Publishers. All rights reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|
