In differenceの部分一致の例文一覧と使い方
該当件数 : 28631件
To provide a new optical resin material which has small absorption of light in optical communications area, has a big difference of a refractive index of light by electrooptic effect, and is useful as an optical control device material.例文帳に追加
光通信領域の光に対して吸収が小さく電気光学効果による屈折率の変化の大きい、光制御デバイス材料として有用な新規な光学樹脂材料を提供する。 - 特許庁
To provide a slide door device capable of realizing an air conditioning unit for a vehicle in which a cold air and warm air mixing performance is so favorable that less temperature difference occurs between an upper side and lower side while achieving compactness of the unit.例文帳に追加
ユニットのコンパクト化を達成しつつ、冷風と温風との混合性能の良好な上下差温の小さい車両用空気調和ユニットを実現するスライドドア装置提供する。 - 特許庁
To provide a front light using a point light source capable of preventing image light and noise light from being emitted in the same direction and lessening the difference of illumination conditions with the case of being illuminated with external light.例文帳に追加
点光源を用いたフロントライトにおいて、画像光とノイズ光とが同じ方向へ出射されるのを防止すると共に外光により照明している場合との照明具合の差を小さくする。 - 特許庁
The flat speaker 13 is fitted to the top plate part 11 to be embedded therein with the upside of the top plate surface 11a is defined as the sound emitting direction, and installed without a difference in level from the desk surface part.例文帳に追加
平面スピーカ13は、天板面11aの上方を放音方向として天板部11に埋め込むように取り付けられており、机表面部とは段差を設けないように設置されている。 - 特許庁
The maximum difference R_max in elevation at the surface of the bearing part 11 is not more than 0.1 μm, and the sectional shape of a bearing face 13 of the bearing part 11 is a circular arc shape projecting toward a shaft 12 side.例文帳に追加
軸受け部11の表面の最大高低差R_maxは0.1μm以下であり、軸受け部11の軸受け面13の断面形状は軸12側に突出した円弧形状となっている。 - 特許庁
To provide an optical head capable of further improving a recording/reproducing performance of an optical recording medium by reducing a difference in phase change amounts within a light spot caused by a light incident angle.例文帳に追加
光の入射角に起因する光スポット内における位相変化量の差を低減して光記録媒体の記録再生特性をさらに向上させることができる光学ヘッドを提供する。 - 特許庁
To generate a conversion table capable of changing the methods of determining total color material amounts according to a color material amount restriction and accommodating difference in characteristics for every arbitary printer, thereby attaining a highly precise color reproduction.例文帳に追加
色材量制限に応じて合計色材量を決める方法を変え、任意のカラープリンタごとの特性の違いを吸収して高精度な色再現が可能な変換テーブルを作成する。 - 特許庁
The position display module 3 has a built-in optical fiber 8 having a different specific refractive index from that of an optical fiber of the optical fiber sensor line 2, and the difference between the specific refractive indices is from 0.05-0.15%.例文帳に追加
位置表示モジュール3は、比屈折率が、光ファイバセンサ線路2の光ファイバと異なり、この比屈折率の差が0.05%以上、0.15%以下となる内蔵光ファイバ8を有する。 - 特許庁
Since the difference of them, D31-D42, shows different values clearly for both cases, presence of absence of use of the special singing method can be judged when a determination value for differentiating both is used in karaoke singing equipment.例文帳に追加
したがって、これらの差分D31−D42は、両者で明らかに異なる値を示すため、両者を区別するための判定値を用いれば、特殊歌唱方法の使用の有無が判定できる。 - 特許庁
Though the number of wound layers is reduced as approaching the top of the end plate, uniform thickness as a whole is obtained because the difference of peripheral length in each face of the (n-1) tubes is absorbed by overlapping between respective layers.例文帳に追加
端板頂点に近いほど巻きつけ層数が漸減するが(n−1)箇の各面での周長の差が各層間の重複により吸収されるため全体として均等の厚さとなる。 - 特許庁
To provide a spectral characteristic measuring apparatus which is capable of obtaining high-precision interferogram in spite of using a low-priced driving device for elongating/contracting an optical path length difference, and a spectral characteristic measuring method.例文帳に追加
光路長差を伸縮させるために低価格の駆動装置を用いながらも、高精度なインターフェログラムを得ることができる分光特性測定装置及び分光特性測定方法を提供する。 - 特許庁
To provide an image processor capable of solving the problem of occurrence of isolated dots due to error diffusion and the problem of defects due to the light amount difference in a multibeam system, and to provide an LED array system, an image recording device, and a program.例文帳に追加
誤差拡散により孤立ドットとが発生する問題とマルチビーム方式もLEDアレイ方式による課題を解決できる画像処理装置、画像記録装置及びプログラムを提供すること。 - 特許庁
The PCB and the water are recovered separately due to the difference of specific gravity, the hazardous material such a PCB is used as fuel in a blast furnace or the like, and water is used again as the high pressure water for cutting after the treatment.例文帳に追加
PCBと水は比重の差によりそれぞれ分別回収され、PCB等の有害物質は高炉等で燃料として利用し、水は処理後再び高圧水として切断用に使用される。 - 特許庁
To allow a platform to be disposed without practically generating a level difference with a floor surface of a bottom floor boarding place for inspection work, and to reduce the footprint in storing after the work finishes.例文帳に追加
点検作業に際しては最下階乗場の床面とほとんど段差を生じることなく作業床を配置でき、作業終了後の収納時には占有スペースを小さくすることができる。 - 特許庁
A yaw rate F/B control unit 28 is provided with a phase adjustment calculation unit 33 for performing a phase adjustment to delay a phase in regard to a difference Δγ between a desired yaw rate γ* and a yaw rate γ.例文帳に追加
ヨーレイトF/B制御部28には、目標ヨーレイトγ*とヨーレイトγとの偏差Δγについて、その位相を遅らせるべく位相調整を実行する位相調整演算部33が設けられる。 - 特許庁
In a stratifying section 24, a total of the difference between the data of an additional pulse rate on an envelope and the data being positioned on the time axis same as that of this additional pulse rate on the ground line (= deviation) is calculated.例文帳に追加
層別部24では包絡線上の加算脈波値のデータと、基線上でこの加算脈波値と同じ時間軸上に位置する点のデータとの差分の合計値(=偏差)を算出する。 - 特許庁
Downstream the difference in the vertical direction of a screen 80 as the temporal axis, an icon 812 indicating a bidding designated by the participant is provided at a position which indicates a scheduled bidding start time corresponding to the bidding.例文帳に追加
余実差異の下方には、参加者が指定したせりを表すアイコン812が、画面80の上下方向を時間軸として、それに対応するせりのせり開始予定時刻を表す位置に配置されている。 - 特許庁
With such a constitution, the diameter-expanding work for the cylindrical element 1 can be conducted properly by one diameter-expanding device 2, regardless of the difference in the expanded diameter of the object cylindrical component 1.例文帳に追加
これにより、拡径すべき筒状部材1の拡径寸法の相違に拘らず、この筒状部材1の拡径作業を同一の拡径装置2aにより適切に行なえる様にして、上記課題を解決する。 - 特許庁
This current transformer 10 has also a current component output terminal 16 for outputting a current component signal based on the secondary side current, and the phase difference and the correction value stored in the storage part 15.例文帳に追加
また、変流器10は、二次側電流に基づく電流成分信号ならびに記憶部15に記憶された位相差および補正値を出力可能な電流成分出力端子16を有している。 - 特許庁
To solve the following problem: A ceramic substrate tends to warp due to a large difference in the degree of contraction by burning between a conductor paste and green sheet after burning and hence dimensional accuracy becomes difficult to improve.例文帳に追加
導体ペーストとグリーンシートとでは、焼成による収縮の程度が大きく異なるため、これに起因して、焼成後に、セラミック基板が反りやすくなり、寸法精度を向上させることが困難である。 - 特許庁
To provide an ink composition for use in a pen-core type writing utensil which is capable of forming good handwritings with having no patchiness and no shade difference at the time of writing and to provide a pen-core type writing utensil containing it and having the excellent writing performance.例文帳に追加
筆記時にかすれや濃淡差のない良好な筆跡を形成できるペン芯式筆記具用インキ組成物と、それを収容した筆記性能に優れたペン芯式筆記具を提供する。 - 特許庁
In the detection period, the correction means cuts off the electricity conduction and detects a potential difference across a source S and a gate G of the drive transistor Tr2 while a transient current Iref flows therethrough.例文帳に追加
検出期間で、補正手段は該通電を遮断しドライブトランジスタTr2に過渡電流Irefが流れている間に、ドライブトランジスタTr2のソースSとゲートG間に現れる電位差を検出する。 - 特許庁
When the vehicle starts climbing down a mountain or traveling downhill, an inclination sensor 9 detects the difference in the angular position of the seat 12 relative to a horizon H, and a servomotor 4 is activated by a control means 2.例文帳に追加
車両が下山のまたは下り坂の走行に移るとき、傾斜センサ9が、水平線Hに対する座席12の角度位置の差を検出し、制御手段2によってサーボモータ4が起動される。 - 特許庁
To provide a plasma processing method that decreases pattern difference and that performs uniform processings, and to provide a manufacturing method of a semiconductor device using the same, in a multilayered film containing a number of films having different gas permeabilities.例文帳に追加
ガス透過性が異なる膜を含む多層膜において、パターン差を低減し均一な加工を行うプラズマ処理方法およびそれを用いた半導体装置の製造方法を提供する。 - 特許庁
A section near to the boundary of a heating region surrounding the mark 2 on the screen base fabric 1 and a non-heating region on the outside is formed in a flat surface without a flare resulting from the thermal shrinkage difference of both regions at that time.例文帳に追加
この際、スクリーン基布1のマーク2を取り囲む加熱領域とその外側の非加熱領域との境目付近を、両領域の熱収縮差に起因するフレヤがなくフラット面に形成する。 - 特許庁
A time difference from a write start point of time until a read start point of time is controlled in both processing ways so that a write address does not overtake a read address and all the written data are read.例文帳に追加
いずれの処理でも、読み出すアドレスを書き込むアドレスが追い越すことのないように、書き込み開始時点から読み出し開始時点までの時間差を制御し、全ての書き込みデータを読み出す。 - 特許庁
To provide component master creating method/device with which data at every part of a shape can be inputted by using a name that is accustomed to use on a user side irrespective of a difference in a model and a manufacturing company.例文帳に追加
形状の部位ごとのデータ入力を機種や製造会社の違いに拘わり無くユーザ側で使い慣れた呼称を用いて入力できる部品マスター作成方法及び装置を提供する。 - 特許庁
In a process of distortion prevention measures, a printer 100 acquires a BD interval, or a time difference between a detection timing of a first optical sensor 371 and a detection timing of a second optical sensor 372 (S103).例文帳に追加
プリンタ100は,歪み対策処理の中で,第1光センサ371での検出タイミングと第2光センサ372での検出タイミングとの時間差であるBD間隔を取得する(S103)。 - 特許庁
By opening the drain valve 26, the water stored in the sump pit 21 is sucked, and drained to the draft tube, by using pressure difference between the sump pit 21 and the upper draft tube 14a.例文帳に追加
そして、排水弁26を開くことにより、排水ピット21と上部吸出管14aと間で発生する圧力差により排水ピット21に貯留されている水を吸引して吸出管14に排水する。 - 特許庁
To solve the problem that conventionally the difference in dimensions of a resist on a wafer corresponding to parts to be etched and parts which are not to be etched, and to provide and etched phase shift mask having a structure which is practical even with respect to strength.例文帳に追加
掘り込み部と非掘り込み部とにそれぞれ対応する、ウエハ上のレジストの寸法差の問題を解決でき、且つ、強度的にも実用的な構造の彫り込み型の位相シフトマスクを提供する。 - 特許庁
This difference in arrival time of a pulse caused by a discharge at the portion of a gap 6 for calibration is measured by measuring instruments 8a, 8b provided on both ends of the cable 1 to find the propagation velocity of the pulse.例文帳に追加
校正用ギャップ6部分での放電に基づくパルスの到達時刻の差を、上記ケーブル1の両端部に設けた測定器8a、8bにより測定して、上記パルスの伝播速度を求める。 - 特許庁
Multipoint measurement for the object under measurement using one phase-difference sensor 13 can be thereby achieved to perform high-precision measurement, by reducing the measurement errors due to the individual differences in the change of shape.例文帳に追加
これにより、1つの位相差センサ13を用いて測定対象に対する多点測距を実現でき、形状変化の固体差による測定誤差を軽減して精度の高い測定を行うことが可能となる。 - 特許庁
To simultaneously perform horizontal rotation and transfer of a commodity by giving a difference in speed between a pair of parallel transfer planes forming a transfer passage for the commodity and determining directions with guides or the like.例文帳に追加
物品の水平回転と移送の両方を、物品の移送路を形成する平行な一対の移送面に速度差を持たせ、ガイド等により方向付けるだけで同時に同時に可能となす。 - 特許庁
To provide a hot-dip plating method which can reduce a vibration of sheet in a gas wiper part, without deteriorating a quality of sheet and with sufficiently improving difference of plated zinc weight, during an operation.例文帳に追加
操業上で板の品質を劣化させたり、亜鉛付着量の差が十分改善されなかったりすることなく、ガスワイパ部での板振動を低減させ得る溶融メッキ処理方法を提供する。 - 特許庁
A frame processing unit receives a bit stream of a frame to be decoded, determines a luminance star point, a color difference start point, and a set of frame modification parameters, and stores the parameters in a buffer unit.例文帳に追加
フレーム処理ユニットは、復号化すべきフレームのビットストリームを受信し、輝度始点および色差始点ならびにフレームにおける一組のフレーム変形パラメータを決定し、これらのパラメータをバッファユニットに記憶する。 - 特許庁
Output voltages to be obtained from all power sources to be operated in parallel are amplified, and compared with a first reference value, and a voltage equivalent to the difference is inputted to the outside control voltage input terminal of a power source.例文帳に追加
並列運転する全ての電源から得られる出力電圧を増幅して第1の基準値と比較し、差分に相当する電圧を電源の外部制御電圧入力端子に入力する。 - 特許庁
The bending prevention part 7c is a projection part which bends from the blade receiving plate 7 toward an interval blade 5 and a step surface 7d is formed having a difference in level from the other surface of the blade receiving plate 7 across the projection part 7c.例文帳に追加
撓み防止部7cは、羽根受板7から間隔羽根5に向かって屈曲する凸部であり、この凸部7cを介して羽根受板7の他の面より段差をつけて段差面7dを形成する。 - 特許庁
To provide an adhesive which has no problems of an omission of filling, sagging of a liquid, insufficiency of filling in a fitting part having level difference and the like, and enables bonding to a predetermined application part without any gap.例文帳に追加
充填漏れ、液垂れの問題や段差等のある嵌合部での充填不足等の問題がなく、所定の装着部に間隙なく密着させることが可能となる接着剤を提供する。 - 特許庁
To provide a control device for synchronous motor which improves the stability of the motor which has a difference in level of inductance on a d axis and a q axis viewed from stator winding, by means of a current controller of a single current amplifier.例文帳に追加
ステータ巻線からみてd軸、q軸のインダクタンス高低差があるモータにおいて、1電流アンプの電流制御器にて安定性の良い同期モータの制御装置を提供する。 - 特許庁
To measure a delay time difference between two system transmission lines without stopping an active line in a synchronous digital hierarchy SDH transmission system of 1+1 redundant configuration having a 0 system transmission line and a 1 system transmission line.例文帳に追加
0系伝送路と1系伝送路を有する1+1冗長構成のSDH伝送システムにおいて、運用回線を停止することなく両系伝送路の遅延時間差を測定する。 - 特許庁
The lock signal detection part 71 determines that a QPSK-modulated signal is in the FDC lock only, only when a time average value of phase difference Δθ of a complex signal after carrier phase locking is smaller than a prescribed threshold θ.例文帳に追加
ロック信号検出部71は、搬送波位相同期後の複素信号の位相差Δθの時間平均値が所定の閾値Θよりも小さい場合だけ、FDCロック状態にあると判断する。 - 特許庁
To provide a demand control device for an air conditioner capable of limiting the electric energy used in the air conditioner without giving the sense of discomfort, by reducing the change of temperature or the temperature difference during the demand control.例文帳に追加
デマンド制御時の温度変化もしくは温度差を小さくして、不快感を与えずに空調機の使用電力量を制限する空調機のデマンド制御装置を提供することを目的とする。 - 特許庁
To provide an air washer for preventing an outlet temperature of a primary cold water in a heat exchanger from being lowered by increasing a cooling temperature difference of a circulating water by raising a return temperature of the water to the exchanger.例文帳に追加
熱交換器への循環水の帰り温度を高めて循環水の冷却温度差を大きくし、熱交換器における一次冷水の出口温度の低下を防止するエアワッシャを提供する。 - 特許庁
To obtain a piece of anti-slip gloves excellent in anti-slip effect by fusing the palm-side of a piece of knitted gloves with a sheet layer having uneven anti-slip design with large level difference and complicated shape and fine texture.例文帳に追加
形状が複雑で細かく、かつ段差の大きい凹凸状の滑り止め意匠を有するシート層をメリヤス手袋の掌側に融着し、滑り止め効果に優れた滑り止め手袋を提供する。 - 特許庁
To provide a transmission concentration device capable of reducing an environmental temperature effect, which prevents an error due to a temperature difference from arising, by bringing the temperature of a concentration sensor to coincide with that of a fluid in a fuel cell.例文帳に追加
環境温度の影響を低減させる効果を有する透過式濃度装置に関し、濃度センサーと燃料電池中の流体温度を一致させ、温度差が原因で誤差が生じるのを防ぐ。 - 特許庁
In a conventional example, the carrier of a controller is constituted as one piece, but here carriers are prepared as many pieces as the phases of the power converter, and the phase difference between each carrier and the next is set properly.例文帳に追加
制御器の搬送波は、従来例では1個で構成されるが、本発明では搬送波を電力変換器の相数分だけ用意し、さらに各搬送波の位相差を適切に設定する。 - 特許庁
This comparison controls the position of the wafer so as to position the plane position of the wafer in the vicinity of the imaging surface of the projection optical system until a start of the exposure of the following shot when the difference exceeds the threshold.例文帳に追加
この比較により、差が閾値を越えていた場合には、次ショットの露光開始までにウエハの面位置が投影光学系の結像面の近傍に位置するようなウエハの位置制御を実行する。 - 特許庁
In that case, as the main bit line is charged and raised to Vmbl (=Vleg-Vth(ST)), potential difference between a drain and a source of a select-transistor and a main bit line discharge transistor is made lower, and stress can be lightened.例文帳に追加
その場合に、メインビット線が充電されてVmbl(=Vleg−Vth(ST))に引き上げられるため、セレクトトランジスタ及びメインビット線ディスチャージトランジスタのドレイン‐ソース間の電位差が低くなり、ストレスを軽減できる。 - 特許庁
To provide a gate line driving method and a gate line driving device in a liquid crystal display that can prevent an influence of potential difference ΔVp between a pixel voltage and a data line voltage and can effectively remove a poor residual image caused by a flicker phenomenon and a DC residual.例文帳に追加
本発明は、画素電圧とデータライン電圧との電位差ΔVpによる影響を避け、フリッカー現象及びDC残留による残像不良を有効的に除去することができる。 - 特許庁
To provide a solid-state image sensor which does not cause image quality deterioration even though there is a difference in a characteristic between a plurality of output amplifiers and has small power consumption, and to provide its driving method and an imaging apparatus.例文帳に追加
複数の出力アンプに特性差があっても画質劣化を生じることなく、しかも消費電力の小さい固体撮像素子及びその駆動方法並びに撮像装置を提供する - 特許庁
| Copyright © Japan Patent office. All Rights Reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|