| 意味 | 例文 |
Or Lessの部分一致の例文一覧と使い方
該当件数 : 24695件
A mixture (Baytron P) of PEDT (polyethylene dioxythiophene) and PPS (polystyrene sulfonic acid) is used as a hole transporting material and water and ethanol are used as polar solvents to obtain a coating composition having a contact angle of 35° or less with respect to an ITO layer.例文帳に追加
正孔輸送材料としてPEDT(ポリエチレンジオキシチオフェン)とPSS(ポリスチレンスルフォン酸)との混合物(バイトロンP)を用い、極性溶媒として水、エタノールを用いてITO層に対する接触角が35゜以下となる塗布組成物を得る。 - 特許庁
The powder magnetic core 10 has a core body part 12 for mainly composing a magnetic path, and at least not less than one low magnetic part 14 or nonmagnetic part 14 arranged on the magnetic path and having initial permearbility lower than that of the core body part 12.例文帳に追加
圧粉磁心10は、磁路を主に構成するコア本体部12と、磁路上に少なくとも1つ以上配置され、コア本体部12の初透磁率よりも低い初透磁率を有する低磁性部14または非磁性部14とを有している。 - 特許庁
To provide a fuel cell power generation system, with less pressure loss, easy in treatment of collected dust, and capable of establishing freely a replacement location of a filter (location of maintenance entrance) when it is made a configuration of a fuel cell system or a module.例文帳に追加
圧力損失が小さく、捕集した塵埃の処理が容易で、且つ燃料電池システムやモジュールの形態にした場合に、フィルタの交換位置(メンテナンス口の位置)を自由に設定できるようにした燃料電池発電システムを提供すること。 - 特許庁
Second determination concerning whether the decreasing rate is equal to or less than a predetermined threshold is continuously performed (S14), when a second determination result is affirmative, it is determined that a vehicle moves away from a relay station which is utilized at present, and the search processing is performed (S15).例文帳に追加
引き続き、低下率が所定閾値以下であるかの第2判定が行われ(S14)、第2判定結果が肯定的であった場合は、現在利用している中継局から車両が遠ざかったと判断され、サーチ処理を実行する(S15)。 - 特許庁
An informing means 46 for waning an occupant of a battery change at a timing in which an intermittent radio waves are transmitted from the intermittent radio wave transmitter 40 after the remaining amount of the battery 42 becomes a specified value or less after the remaining amount of the battery 42 is detected.例文帳に追加
さらに、電池42の残量を検出して電池42の残量が所定値以下となった時に、間欠電波発信機40から間欠電波が発信されるタイミングに電池交換を警告する報知手段46を接続する。 - 特許庁
The bristle for the toothbrush, whose tapered part starts to taper down from a position 10 mm or less away from the tip of the bristle, is characterized in that the diameter of the tip of the tapered bristle is set in a range of 0.04-0.06 mm.例文帳に追加
本発明に係る歯ブラシ用毛は、毛の先端から10mm以下でテーパが始まるテーパが形成された歯ブラシ用毛において、テーパが形成された毛の先端の直径が0.04〜0.06mmまでとされていることを特徴とする。 - 特許庁
To provide a small ink-jet head which dispenses with the setting of the positioning precision of a piezoelectric element to a half or less of a nozzle pitch, dispenses with the dimensional precision of the piezoelectric element itself, and require no space corresponding to a space for two heads even if two nozzle rows are provided therefor.例文帳に追加
圧電素子の位置決め精度をノズルピッチの1/2以下にする必要が無いとともに、圧電素子自体の寸法精度を必要要とせず、2列のノズル列を有しても2ヘッド分のスペースを要しない、小型なインクジェットヘッドを提供する。 - 特許庁
Between the ground potential and the power supply potential of the wiring and driving circuit, a protection circuit is provided for suppressing an abnormal voltage caused in the terminal at the level of equal to or less than a predetermined value, with elements having the same laminated structure as that of the light-emitting element serving as the circuit components.例文帳に追加
配線と駆動回路の接地電位及び電源電位との間に、端子に生じる異常電圧を一定値以下に抑えるための、発光素子と同じ積層構造を有する素子を回路要素とする保護回路が設けられる。 - 特許庁
To improve reliability of a junction part by restraining fusion of polycrystalline alumina at the time of junction, in a junction equipped with a first member and a second member made of the polycrystalline alumina with an average particle size of 20 μm or less and a junction material.例文帳に追加
平均粒径20μm以下の多結晶アルミナからなる第一の部材、第二の部材および接合材を備えている接合体において、接合時における多結晶アルミナの溶融を抑制し、接合部分の信頼性を向上させる。 - 特許庁
To provide a light guide plate having a weight of 1/2 or less compared with a light guide plate of a constant thickness (a rectangular parallelepiped) which is the light guide plate capable of being applied to a fluorescent lamp of thermionic cathode, and as a result, a large liquid crystal display with light weight.例文帳に追加
熱陰極型の蛍光ランプに対応できる導光板であって、厚みが一定(直方体)の導光板に比べて1/2以下の重量の導光板を提供し、もって軽量化された大型液晶ディスプレイを提供する。 - 特許庁
(3) The substrate-less double-sided adhesive tape in the paragraph (1) or (2), wherein the thickness, average length, and average width of the scaly particles are 1 to 15 μm, 40 to 400 μm, and 40 to 400 μm, respectively, and the ratio of the average length to the average width is 1:1 to 3.例文帳に追加
(3)鱗片状粒子の厚さが1〜15μm、かつ粒子の平均長さおよび平均幅が40〜400μmで、平均幅と平均長さの比が1:1〜3である前記(1)または(2)項記載の基材レス両面粘着テープとする。 - 特許庁
The adhesive part 7 has an acreage weight of 5-50 g/m^2; the adhesive thinner parts 7B has a maximum width of 0.5 mm or less, and the adhesive thinner parts 7B has an area share of 10-60% in the adhesive part 7.例文帳に追加
そして、接着部7の坪量が5〜50g/m_2であり、また、接着薄部7Bの最大幅が0.5mm以下であり、且つ接着薄部7Bの前記接着部7に占める面積の割合が10〜60%であることを特徴とする。 - 特許庁
The device does not generate transfer defect in the case of adopting the recording material P of the small size with high resistance by constituting the transfer system 15, so as to make dynamic impedance per unit length of the transfer nip N2 in the lengthwise direction to be 0.3 MΩ.m or less under all environment.例文帳に追加
転写系15を、転写ニップN2の長手方向の単位長さ当たりの動的インピーダンスが、全環境で0.3MΩ・m以上となるようにすることにより、記録材Pが高抵抗の小サイズの場合の転写不良が防止される。 - 特許庁
The controller 4 supplies power from the external power source 9 toward the heater 3 if the power W detected by the reverse power relaying unit 11 is a predetermined power X or less, and detects the fault of the reverse power relaying unit 11.例文帳に追加
制御装置4は、逆電力継電装置11により検知される電力Wが所定の電力X以下である場合に、外部電源9からヒータ3に向けて電力を供給させ、逆電力継電装置11の異常を検知する。 - 特許庁
When a semiconductor chip is sealed with a resin, the heat- resistant pressure-sensitive adhesive tape is used to mask a terminal area by applying it to the area, and the tape is provided with a heat-resistant layer having an oxygen permeability of 50 cm3/m2.24 h.atm or less and an adherent layer.例文帳に追加
半導体チップを樹脂封止する際に端子部をマスキングするために貼着して使用される耐熱性粘着テープであって、酸素透過度50cm^3 /m^2 ・24h・atm以下の耐熱性層と粘着性層とを備える。 - 特許庁
An apparatus for controlling a speed change of a drive wheel selects a Snow mode as the running mode of an MMT 12 (Yes in step S101), and inhibits the shift change of the MMT 12 (step S103) when the return amount δTA of an accelerator is δTA0 or less (No in step S102).例文帳に追加
MMT12の走行モードにSnowモードが選択され(ステップS101;Yes)、アクセルの戻し量δTAがδTA0以下である場合には(ステップS102;No)、MMT12のシフトチェンジを禁止する(ステップS103)。 - 特許庁
When the on-air time of the program is 20 minutes or more, the program name is displayed in a display area using a large font (S4), and when the on-air time is less than 20 minutes, the program name is displayed in the display area using a small font (S6).例文帳に追加
番組の放送時間が、20分以上の場合は、表示領域内にラージフォントを用いて番組名を表示し、番組の放送時間が20分未満の場合は、表示領域内にスモールフォントを用いて番組名を表示する。 - 特許庁
Rotation speed of a crankshaft 3 for releasing an operation of the decompression device is set up to be greater than the maximum rotation speed of the crankshaft 3 operated by a starter motor 4, and is set up to be at a range of the minimum rotation speed or less of the crankshaft 3 caused by initial explosion in the cylinder 6.例文帳に追加
また、デコンプ動作を解除するクランクシャフト3の回転速度を、スタータモータ4によるクランクシャフト3の最大回転速度よりも大きく、かつ気筒6における初爆によるクランクシャフト3の最小回転速度以下の範囲に設定する。 - 特許庁
On the other hand, when a fluctuation pattern of the flow rate fluctuates with a prescribed fluctuation pattern (S125:YES), the burner is extinguished (S130), and the water heater stands ready until the prescribed time passes in the state that the flow rate is kept at the second threshold value or less (S135:NO) thereafter.例文帳に追加
一方、流量の変動パターンが所定の変動パターンで変動した場合には(S125:YES)、バーナーの消火を行い(S130)、その後は、流量が第二のしきい値以下となったまま所定時間が経過するまで待機する(S135:NO)。 - 特許庁
The moving speed of a user is equal to or less than a threshold speed Vth until a time t1, and as a map scroll mode, a map is scrolled at the scroll speed corresponding to the moving speed of the user on a display screen 1 and a cursor 9a is displayed at the center of the display screen 1.例文帳に追加
時点t1までは、ユーザの移動速度が閾値速度Vth以下であり、地図スクロールモードとして、表示画面1上でユーザの移動速度に応じたスクロール速度で地図をスクロールし、カーソル9aを表示画面1の中心に表示する。 - 特許庁
To achieve an air conditioner network capable of computing the total used power of a group of air conditioners and cooperatively controlling other air conditioners so as to maintain the total used power at a predetermined value or less by only preparing air conditioners without using a breaker and a controller.例文帳に追加
空調機器を用意するだけで、特別なブレイカやコントローラがなくても、空調機器群の総和使用電力を演算し所定の値以下に維持するよう他の空調機器を連携制御する空調機器ネットワークを実現すること。 - 特許庁
That is, the area of copper with the linear expansion coefficient of about 17 [ppm/°C] is increased in the cross section passing at least the solder joint parts 141, so that an average linear expansion coefficient is reduced to be equal to or less than the reference linear expansion coefficient.例文帳に追加
すなわち、少なくとも半田接合部141を通る断面において、線膨張係数が約17[ppm/℃]の銅の面積を増やすことで、平均線膨張係数が基準線膨張係数以下に低減されるようにしている。 - 特許庁
The glass film laminate 1 is formed by stacking a supporting glass 3 on a glass film 2, and a surface roughness Ra of a surface of a side where the glass film and the supporting glass are brought into contact with each other is 2.0 nm or less.例文帳に追加
ガラスフィルム2に支持ガラス3を積層したガラスフィルム積層体1であって、前記ガラスフィルム及び前記支持ガラス相互に接触する側の表面の表面粗さRaが2.0nm以下であることを特徴とするガラスフィルム積層体。 - 特許庁
The method for producing PHAs includes proliferating a halophilic bacterium in a culture medium not containing a composite organic compound such as an amino acid and containing an inorganic salt and one or more single organic carbon sources at pH 8.8 to 11 to produce the PHAs in an amount of not less than 85 wt.% based on the weight of dried bacterial cells.例文帳に追加
好塩菌をアミノ酸などの複合有機物を含まず、無機塩と単一もしくは複数の単一有機炭素源からなるpH8.8〜11の培地で増殖することにより、乾燥菌体重量に対して85重量%以上のPHAsを産生した。 - 特許庁
To obtain a manufacturing method of a liquid ejection head causing less failure by way of reducing the precipitation and contamination of heavy metals such as Cu, Ni on the surface of diaphragm of the liquid ejection head and suppressing the generation of the dielectric breakdown or poor driving, and to obtain an image recorder.例文帳に追加
液体噴射ヘッドの振動板の表面のCu、Ni等の重金属の析出、汚染を減少させ、絶縁破壊や駆動不良の発生を抑え、不良の少ない液体噴射ヘッドの製造方法および画像記録装置を得ること。 - 特許庁
A suppression section suppresses a component of the predetermined frequency, in which it is determined that the difference of the input value is the predetermined threshold or less, by the determination section, from frequencies included in voice which is inputted from the voice input device selected by the selection section.例文帳に追加
抑制部は、選択部により選択された音声入力装置から入力された音声が有する周波数から、判定部により入力値の差が所定の閾値以下であると判定された所定周波数の成分を抑制する。 - 特許庁
To provide a ceramic ball for a machining tool which causes less seizure or abrasion damages to a work and efficiently expands the diameter of a hollow metallic body such as a pipe for piping with excellent accuracy, and a pipe diameter adjusting tool using the same.例文帳に追加
被加工材との焼付きや磨耗損傷を生じることが少なく、配管用パイプ等の金属中空体の径を精度良く効率的に拡張することが可能な加工治具用セラミックスボールおよびそれを用いた管径調整治具を提供する。 - 特許庁
The transmission processing part 72 includes a first mode where delay time of a predetermined cycle or less is generated to the processing, and a second mode where more power consumption is required compared with the first mode and the higher speed processing can be performed compared with the first mode.例文帳に追加
送信処理部72は、処理に対して所定周期以下の遅延時間が発生する第1モードと、当該第1モードに比べて消費電力が多く、当該第1モードに比べて高速処理が可能である第2モードとを有する。 - 特許庁
A substrate on which a catalyst layer has been formed is set in a reaction vessel, the atmosphere in the reaction vessel is set to be a depressurized atmosphere including a carbon-containing gas having a partial pressure of 10 Pa or less, and the substrate is heated to grow carbon fibers on the catalyst layer.例文帳に追加
触媒層を形成した基板を反応容器内に配置し、該反応容器内の雰囲気を、分圧が10Pa以下の炭素含有ガスを含む減圧雰囲気として上記基板を加熱し、触媒層上にカーボンファイバーを成長させる。 - 特許庁
In this method, a slurry having abrasive grains dispersed therein is supplied between a wire driven by use of a roller formed of esteric urethane rubber and a workpiece while imparting a tension ranging from 19.6 N to 39.2 N or less to cut the rear earth alloy.例文帳に追加
エステル系ウレタンゴムから形成されたローラを用いて駆動されるワイヤに19.6N以上39.2N以下の張力を与えながら、砥粒が分散されたスラリをワイヤと被加工物との間に供給しつつ、希土類合金を切断する。 - 特許庁
The gypsum molded bodies 1 are covered with the base paper 5 for the board or the like, in the exposed surface 7, as the gypsum board, and the coating requires less drying time than the slurry.例文帳に追加
この石膏成形体1は、片面にボード用原紙5がない状態で乾燥できるから、この石膏成形体1の製造効率は、表裏両面をボード用原紙に挟まれた状態で乾燥される石膏ボードと比べて格段に向上する。 - 特許庁
This image-forming device is provided with signaling means 8g, 8h and 12, that are operated when the free capacities of areas 5a to 5n are equal to or less than prescribed quantity in the case of collectively performing key macro registration of the plurality of operation keys in the key-macro at a single-touch of key 8a with respect to.例文帳に追加
キーマクロワンタッチキー8aに対して、複数の操作キーを順にまとめてキーマクロ登録しているときに、領域5a〜5nの空き容量が所定量以下になったときには作動する報知手段8g,8h,12を備える。 - 特許庁
Thermoplastics based pellets (specific volume resistivity is 101-1010 Ω.cm) containing conductive carbon black of 10 wt.% or less are predried (S1), and heated and kneaded in a cylinder barrel of an extruder to obtain a paste (S2).例文帳に追加
熱可塑性樹脂をベースとし導電性カーボンブラックを10wt%以下含んだペレット(体積固有抵抗値が10^1〜10^10Ω・cm)を予備乾燥(S1)した後、押出成形装置のシリンダバレル内にて加熱および混練することによりペーストを得る(S2)。 - 特許庁
To provide an onychocryptosis orthodontic tool which can easily be attached to the nail, has less fear for being caught by apparel or the like as it remains attached, and also, can continuously perform an orthodontic action by a proper force, and to provide an attached nail for ornament.例文帳に追加
爪への取り付けが簡単で、取り付けられた状態では、衣類などに引っ掛かる虞も少なく、かつ、矯正作用も適切な力で持続的に行うことが可能な陥入爪矯正具および装飾用付け爪を提供する。 - 特許庁
To provide a channel estimation apparatus capable of increasing estimation precision in the channel estimate of a reception signal without decreasing communication throughput even if allowable processing delay time is extremely short, for example, 1 slot or less.例文帳に追加
許容される処理遅延時間が例えば1スロット以下と極めて短い場合であっても、通信スループットを低下させることなく、受信信号のチャネル推定値の推定精度を向上させることのできるチャネル推定装置を提供すること。 - 特許庁
This tubular container for the body fluid treater is obtained by injection-molding a plastic material with the impact resistance of 10 kg×cm/cm or less using a die with a gas exhaust part in a die part abutting on a position where the weld line of a mold is formed.例文帳に追加
成型品のウエルドラインが現われる位置に当接する金型部分にガス排出部を設けた金型を用い、衝撃強さが10kg・cm/cm以下のプラスチック材料を射出成型して得られる体液処理器用の筒状容器。 - 特許庁
The former processing causes even an image comprising the same color or similar colors to vary its density and obtain an effect of cancelling density variation due to banding, thereby causing the banding of the printed image to be less conspicuous.例文帳に追加
このように乱数加算処理を行うことで、同一色又は類似色からなる画像であっても濃度が変動することとなり、バンディングによる濃度変動を相殺する効果が得られるため、印刷画像のバンディングを目立ちにくくすることができる。 - 特許庁
An image of the fluorescein ring part passed through two prisms and a microscope is captured, the deviation ΔL of two half fluorescein rings is accurately measured by image analysis, and a pressure of a measurer is controlled to make the deviation quantity ΔL less than or equal to a fixed value.例文帳に追加
2個のプリズムと顕微鏡を通過したフルオレスセインリング部の画像を取り込み、画像解析により2つの半割れフルオレスセインリングのずれ量ΔLを正確に計測し、ずれ量ΔLが一定値以下になるように、測圧子の押付力を制御する。 - 特許庁
The corrosion inhibition method comprises adding the above corrosion inhibitor to a liquid to be treated, keeping the concentration of the corrosion inhibitor in the liquid at 20 to 200 mg/liter, and keeping the concentration of the phosphorus-containing substance at 2 mg/liter or less expressed in terms of P.例文帳に追加
被処理液に前記腐食抑制剤を添加し、該被処理液中の腐食抑制剤を20〜200mg/リットルの濃度で保持し、かつリン含有物の濃度をP換算で2mg/リットル以下に保持することを特徴とする腐食抑制方法。 - 特許庁
The hydrogen storage alloy contains the rare earth element(s) and nickel (Ni) as main components, and has the CaCu_5 type crystal structure, where the ratio of a lattice constant in c-axis direction to a lattice constant in an a-axis direction of the crystal is 0.8084 or less.例文帳に追加
希土類元素とニッケル(Ni)を主構成成分とし、CaCu_5型結晶構造を有する水素吸蔵合金であって、結晶の結晶のc軸方向とa軸方向の格子定数の比が0.8084以下である水素吸蔵合金とする。 - 特許庁
The heat resistant magnesium alloy is characterized by strengthening the inside of grains by dissolving the element to an extent of less than the maximum dissolved quantity, which has a greater radius than that of a magnesium atom by 9-14%, and has a maximum dissolved quantity into magnesium of 2 mass% or more.例文帳に追加
マグネシウム原子の半径に対して9〜14%大きい半径を有し、かつマグネシウムに対する最大固溶量が2質量%以上である元素を、最大固溶量以下で固溶して粒内を強化した耐熱マグネシウム合金。 - 特許庁
A silane-based undercoat agent containing an organic titanium compound and an ultrafine particle metal oxide having an average particle size of 40 nm or less, a resin-based top coat adhesive agent, and the rubber are successively laminated on a stainless steel plate to form the cylinder head gasket material for engine.例文帳に追加
ステンレス鋼板上に有機チタン化合物および平均粒径40nm以下の超微粒子金属酸化物を含有するシラン系下塗り剤、樹脂系上塗り接着剤およびゴムを順次積層したエンジン用シリンダヘッドガスケット素材。 - 特許庁
To provide a manufacturing method of a metal mold for molding a honeycomb structure, superior in moldability of the provided honeycomb structure, by smoothly forming a slit groove without damaging a rotary tool, even if the rotary tool having the thickness of 150 μm or less is used.例文帳に追加
150μm以下の厚みの回転工具を用いても,これが破損することなくスムーズにスリット溝を形成することができ,かつ,得られるハニカム構造体の成形性に優れた,ハニカム構造体成形用金型の製造方法を提供すること。 - 特許庁
The electrolytic tin plating solution for the ceramic electronic component contains stannous ion and a chelating agent, and whose pH is controlled between 6-9, and whose value of the relation (molar concentration of the chelate agent)/(molar concentration of stannous ion) is controlled higher than 2.4 and 4.5 or less.例文帳に追加
本実施形態に係るめっき液は、セラミック電子部品用の電気スズめっき液であって、スズイオン及びキレート剤を含み、pHが6以上9以下であり、キレート剤のモル濃度/スズイオンのモル濃度の値が2.4より大きく、4.5以下である。 - 特許庁
The carrier for electrostatic charge image development has a coating resin layer on the surface of a magnetic nucleus particle and is characterized in that the coating resin layer contains carbon black and that the moisture absorption of the carbon black is 1.0 wt.% or less.例文帳に追加
磁性核体粒子表面に被覆樹脂層を有する静電荷像現像用キャリアであって、該被覆樹脂層はカーボンブラックを含有し、該カーボンブラックの吸湿量が1.0wt%以下であることを特徴とする静電荷像現像用キャリア。 - 特許庁
This organic light emitting diode device is characterized in placing the light emissive layer (LEL) including a host and stabilizer between an anode and a cathode, having the stabilizer including five or more condensed rings, and expressing a first triplet energy level of less than 130 kJ mol.例文帳に追加
アノードとカソードとの間に、ホスト及び安定剤を含有する発光層(LEL)を配置して成り、該安定剤が、縮合環を5個以上含有し、かつ、130kJ/モル未満の第1三重項エネルギーレベルを示すことを特徴とする有機発光ダイオードデバイス。 - 特許庁
When the size of a deviation between the turning angle of the input shaft 2 and a turning angle of the output shaft 11 is a preset value or more, control gain in the control system of the motor-driven actuator 39 is reduced more than when the size is less than the preset value.例文帳に追加
その入力シャフト2の回転角と出力シャフト11の回転角との偏差の大きさが設定値以上である場合は、その設定値未満である場合よりも、その電動アクチュエータ39の制御系における制御ゲインを小さくする。 - 特許庁
In the lid, member the reflectance of the printed face (i.e., reflectance relative to a standard white surface measured according to "Methods of color measurement-reflecting and transmitting objects" defined by JIS Z 8722:2000) is preferably 105% or less.例文帳に追加
この蓋材において、前記印刷面の反射率(ただし、該反射率はJIS Z 8722:2000の「反射物体の測定方法」に準じて測定した常用標準白色面に対する反射率である。)が105%以下であることが好ましい。 - 特許庁
The print data transmitted from a specific user whose number of prints is equal to or less than the number of blank pages counted in step S3 and whose priority order is the highest are extracted from among the print data temporarily stored in the server 1 (S4 to S7).例文帳に追加
次に、サーバ1に一時的に記憶されている印刷データの中から、特定のユーザから送信され、S3にてカウントした白紙ページ枚数以下の印刷枚数であり、もっとも優先順位の高い印刷データを抽出する(S4〜S7)。 - 特許庁
A mesh pattern of resin composition having an average line width of 50 μm or less is formed on a transparent base material by gravure printing method, and a metal layer is provided on that pattern thus producing a transparent electromagnetic wave shielding material imparted with conductivity.例文帳に追加
透明基材上にグラビア印刷法により樹脂組成物からなる平均線幅50μm 以下の網状パターンが形成され、そのパターン上に金属層が設けられ、導電性が付与されている透明電磁波遮蔽材料が提供される。 - 特許庁
| 意味 | 例文 |
| Copyright © Japan Patent office. All Rights Reserved. |
|
ログイン |
Weblio会員(無料)になると
|
|
ログイン |
Weblio会員(無料)になると
|